Advanced Aviation Job Search

$250 travel pay payable on 1^st check!

Troubleshoot repairs, inspect, modify and service aircraft avionics, electrical and electronic equipment. Perform and document all work performed per appropriate manuals and regulations as required.

• Adhere to General Work Requirements (Factory, Shop and / or Hangar positions)
• Comply ...

• Performs wire by wire, power, functional and operational check-outs of electrical and avionics systems prior to aircraft flight.
• Required to set-up all required electrical and electronic test equipment in compliance with technical data, and then complete the appropriate functional tests that are required for each system.
• Required to troubleshoot problem systems and ...

Skill: Aircraft Painter

Duration: 3+ months (open ended)

Location: Little Rock AR

Aircraft: Falcon Jet

Salary: please call Strom Aviation for compensation details (800) 743-8988

Description:

• The Aircraft Painter prepares aircraft ...

Skill: Sheetmetal Tech

Duration: 3+ months (open ended)

Location: Little Rock, AR

Aircraft: Falcon Jet

Salary: please call Strom Aviation for compensation details (800) 743-8988; Bonuses Offered 

Description:

Installation of airframe ...

Skill:Sheet Metal Installers

Duration: 6+ months

Location: Ft Worth TX

Aircraft:VIP commercial

Salary: please call for compensation details (800) 743-8988

Job Description

Candidates will be forming, fabricatiing, bonding, shrinking/stretching, ...

• Troubleshoot repairs, inspect, modify and service aircraft avionics, electrical and electronic equipment. Perform and document all work performed per appropriate manuals and regulations as required
• Adhere to Clients General Work Requirements (Factory, Shop and / or Hangar positions)
• Comply with environmental health / safety policies and procedures. Participate in ...

Skill: Avionics Technician

Duration: 6+ months

Location: Ft Worth TX

Aircraft: VIP commercial

Salary: please call for compensation details (800) 743-8988

Job Description

 ESSENTIAL FUNCTIONS AND RESPONSIBILITIES include the following:

Skill: Interior Installer

Duration: 3+ months (open ended)

Location: Little Rock, AR

Aircraft: Falcon Jet

Salary: please call Strom Aviation for compensation details (800) 743-8988; Bonuses Offered  

Description:

Safely perform ...

Skill: Sheet Metal Fabrication

Duration: Long Term

Location: Ft Worth TX

Aircraft: B787, 777

Salary: Please call Strom Aviation for compensation details (800) 743-8988

Details:

Looking for individuals who can fabricate, cut, bend sheet metal. Ability to read complex blue prints and engineering drawings. Familiar with cnc machines and ...

The A&P Technician troubleshoots, repairs, inspect sand performs maintenance on Customer aircraft. Performs and documents all work performed per appropriate manuals and regulations as required.

- Adhere to General Work Requirements
- Comply with Environmental / Health / Safety policies and procedures.
- Participate in 5-S activities
- Perform all work in ...

• Troubleshoot, inspect and perform maintenance on customer aircraft sheet metal components, composites and hydraulics. Perform and document all work performed per appropriate manuals and regulations as required.
• Adhere to General Work Requirements (Factory, Shop and / or Hanger positions)
• Comply with environmental health / safety policies / procedures, participate ...
  
  IND18

• Troubleshoot, inspect and perform maintenance on customer aircraft sheet metal components, composites and hydraulics.
• Perform and document all work performed per appropriate manuals and regulations as required.
• - Adhere to General Work Requirements (Factory, Shop and / or Hanger positions)
• - Comply with environmental health / safety policies / procedures, ...
  
  IND18

Assemble, install, seal, rig, inspect, and complete precision and other structural and system components, working from drawings, documents, process specifications, quality control requirements, and established processes and procedures. Functional test and correct, fit form and function of assemblies and components.
Duties
The Company will provide appropriate assistance in job training ...

Description :Responsible for a wide range of inspection functions supporting materials, sheet metal, composites, process and assembly operations. Follow programs, documents, drawings, specifications and quality standards to perform inspection functions. Perform audit/surveillance/measurement/inspection of all sheet metal/composite parts/assemblies according to specifications, ...

• Responsible for inspection, troubleshooting and repair of aircraft to meet company, FAA and customer standards.
•  Fully analyzes all required blueprints, drawings, work orders and sketches in order to troubleshoot, repair and install desired product or part. Is able to detect errors and correct through proper departmental channels
•  Schedules items through ...
  
  IND18

The Painter/Cabinet Finisher: 

  * Performs a wide variety of sanding, prepping, masking, painting, and buffing of aircraft components and furniture.     

  * Interprets and follows engineering drawings and checks work correctness.     

  * Using Artistic ability ...

JOB SUMMARY
This full-time, non-exempt, position requires an extensive knowledge of aircraft cabinet build, finish and interior installations.  The job includes varying amounts of parts replacements or repair and general mechanical applications.  Removal, modification, repair, refurbishment and fabrication of aircraft cabinets are primary job functions. Job duties ...

IND18

Seeking a composite technician in Dallas, TX

• Remove, Replace or Repair various aircraft components. 
• Working knowledge of all aspects of composite repair, composition and characteristics of metals, fiberglass, kevlars, carbon fibers, resins and adhesives. 
• Hot Bond Knowledge required. 
• Maintain and store various tools in a ...

Seeking an Aircraft Painter in Dallas, TX

• Performs minor assembly of parts, components and subsystems using products and processes which are varied but generally not complex in scope to apply primer, topcoat paint, and any spray-applied coatings to aircraft parts consistent with government, customer and company standards.
• Reads and interprets specifications ...

Description/Comment:    

• To identify malfunctions, remove, repair and install a limited variety of aircraft communication, navigation, avionics, and electrical components.
• Perform analysis of routine electrical and avionics malfunctions according to standard shop practices using some equipment such as voltmeters, ohmmeters and continuity ...

Seeking an A&P Technician in Boise, ID

Inspect, test, repair, maintain, and service aircraft using test equipment and hand tools, as needed,
to return aircraft to service per FAA and manufacturers specifications.
Job Duties:

• Performs routine maintenance and inspections on corporate aircraft
• Ensures proper ...

• Performs assembly, disassembly and repairs required in the completion of airframe overhaul, repair or modifications, including but not limited to removal, replacement and repair of parts of engines, airframes and systems.
• Responsible for helping licensed mechanics set up and tear down the equipment, tools and supplies used during the repair of the aircraft. Required to tow and ...

• A&P Mechanics . Perform such typical maintenance operations such as the removal and replacement of aircraft and powerplant components that require bolting, torquing, adjusting rigging and safety wiring, including powerplant and flight control removal and reinstallation
• Repair, modify, replace or overhaul aircraft and aircraft systems to ensure airworthiness.
• Perform ...
  
  IND18

Currently seeking Operations Trainee in Tulsa, OK

This is an entry-level position in which the individual will be trained in the manufacturing processes of the aircraft. In a team environment, under direct supervision, perform a variety of structural assembly operations in a production department.

Essential Functions:

• Under ...

New Bonus Pay

Perform such typical maintenance functions as cabling, component removal/installation, wire harness removal/installation, fabrication/repair of wire assemblies, and continuity checks.
2. Determine if work can safely be accomplished if aircraft is in a power-on mode and be able to conduct necessary testing if in a power-on mode.
3. Fabricate and install all ...

Candidate will be performing checks, repairs both routine and non routine on heavy commercial aircraft.

• Perform all work assigned in accordance with approved FAA data.
• Ensure complete and proper documentation of work performed.
• Ensure that all maintenance performed is in an air worthy condition.
• Maintains the premises and the repair station ...

IND18

• The Aircraft Inspector will be expected to complete evaluations of aircraft, engines and components to determine their condition against established standards and performs inspections of work completed by Aircraft Maintenance Technicians (AMT) to verify compliance with approved data.
• He/She performs work within budgeted time and within clients, FAA, and customers’ ...

Candidate will be performing sheet metal modifications on commercial aircraft. Complete all tasks to the quality standards of FAA and our customers’ approved maintenance manual.  - Perform work within estimated or budgeted hours.  - Read and use Maintenance Manuals, Illustrated parts Catalog, Blueprints, ATA Codes, Service Bulletins, routine and non-routines and other related ...

• Uses predetermined methods, operations, setups and prescribed specifications to inspectvisually in-process and completed products such as electronic units and subsystems, precision electromechanical assemblies or mechanical units, subassemblies, structural flaws, internal defects, and missing welds.
• Uses various measuring devices.
• Accepts ...

1. Perform intermediate level of wire making, bundling, and pre-pinning systems to be installed in VIP aircraft completions.
2. Utilizing increasing knowledge and experience perform wire routing and connecting wiring to accessories, circuit breakers, connectors, etc. 
3. Prep and pin new systems terminations per manufacturer specifications, Comlux Aviation SOP, RSM, and ...

Skill: Systems Technician III

Job Duration: 3+ months

Start: Monday, 04/29, or any Monday thereafter

Hrs. per week: 40+

Tools Required: yes

Shift: Flexible

License: A/P

Job Details and Summary:

Summary: 

Under minimal guidance; plans, lays’ out, fabricates, ...

Skill: Cabinet Builder

Duration: 6+ months

Location: Indianapolis IN

Aircraft: VIP Corporate

Salary: please call for compensation details (800) 743-8988

Job Description:

• Fabricate high quality cabinetry, devan, ledges etc and ...

SHEET METAL TECHNICIAN III 

• These individuals should have the ability to read, interpret and understand blueprints and other documents to accurately determine and plan the work steps to be performed including correctly sizing and drilling holes for riveting.
• Performs basic to complex assembly and fitting of parts, structures, drilling and riveting ...

1. Build high quality seats starting with a frame, utilizing upholstery techniques to ensure foam distribution is proportionate for individual customer specifications which may include a first article inspection.
2. Selects and shapes foam to contours and specifications prescribed on the blueprints and per customer approved design center conceptual drawings. Performs minor modifications ...

Will be doing composite lay ups in the composite shop 

SUMMARY: Performs composite repairs related to molds, wet and pre-preg layup, repair of existing structures pertaining to Honeycomb. Carbon Kevlar and Fiberglass construction. 

ESSENTIAL DUTIES AND RESPONSIBILITIES Ability to perform hot and or cold bond repairs per the Aircraft SRM. EAS & ...

IND18

ESSENTIAL RESPONSIBILITIES

  PURPOSE OF JOB:  To perform scheduled inspections and repairs on Rotorcraft  

ASSIGNED DUTIES:

• • Part of Line Maintenance to perform scheduled inspections and repairs on Rotorcraft.
  • Required to read and interpret blueprints, Technical Orders (T.O.), publications ...

Job Summary:
Purpose of job: To install, trouble shoot and repair electrical wiring and avionics equipment

Duties

• Read and interpret wiring diagrams
• Coordinate with Shift Lead and Engineering on changes to blueprints and diagrams
• Run and Mark wire to install complex wiring and electrical systems
• Perform routine ...

Candidates must have NAS 410 certification and ASNT Certification. This person will be in charge of quality at the site.

• Description :

  Possess the skills/knowledge to perform in one or more of the following classifications:Fabrication/Assembly Inspector Machine/Tooling Inspector

  2. Possess the skills, knowledge and education to operate Multi-Axis ...

Currently seeking Aircraft Plumbers in Savannah, GA  

Under general supervision, fabricates, troubleshoots and repairs water, oxygen, and vent systems using aircraft specifications and design/engineering drawings. 

Essential Functions:

• Performs tasks layout, tube/hose fabrication and installation ...

• Applicant must be able to install and troubleshoot avionics systems efficiently and safely with minimal supervision. 
• Skills must include fabrication of wire harnesses, installations, ring-outs and functional tests of avionics and electrical systems. 
• Ability to read wiring prints and follow installation manuals is a must. 
• Experience in ...

Safely lay-out, fabricate and install parts equipment and fabricated items on aircraft following established operating procedures. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations.

Essential Functions

• Use complicated schematics/blueprints, engineering ...

• Team with others to set-up, operate and inspect parts on conventional and Computerized Numerical Controlled (CNC) machines and mediums to assure the timely production and delivery of quality products to the customer. Work from drawings, documents, process specifications, quality control requirements, and established processes or procedures. Perform multi-tasking and multi-machine operation ...

Seeking Senior Aircraft Painters in Savannah, GA

The Senior Aircraft Painter works independently to safely prepare, paint and detail aircraft according to schedule using company quality standards and operating procedures. Act on behalf of the Lead in their absence and provide assistance and work direction to other painters. 

Essential Functions:

• Safely ...

Currently seeking Interior Installers with 1 Year expereince in Savannah, GA

The Interior Installation Technician I works under close supervision to remove and install and/or fabricate aircraft interiors by using company operating procedures and quality standards.

Essential Functions:

• Safely perform aircraft removal, ...

Position Purpose:

In a team oriented work environment, under moderate supervision, performs a variety of structural assembly operations in a production department.

Principal Duties and Responsibilities:

Essential Functions:

• Perform assembly and fitting of detail parts and structures and varied drilling ...

Performs machine set-up, machining, welding set-up, welding, sheet metal fabrication and extrusion, tube bending and fabrication tasks. Performs composite lay-up, fabrication and assembly tasks. Assembles precision mechanical and electro-mechanical components. Assembles, repairs, modifies and installs various power plants and drive trains. Perform soldering on electronic and avionics products. ...

Description :Installs all applicable aircraft systems/payloads to the engineering intent through the use of electronic media (work instruction, model based definition,specifications, requirements documents, MRB dispositions, etc).Installs, adjusts and validates modules and components required for all systems/payload installations). Proficient with all equipment and tools ...

Currently seeking Quality Control Inspectors in Savannah, GA

In a team oriented environment, perform all tasks in Initial Phase Manufacturing, Composites, or Final Phase in a timely and efficient manner to ensure aircraft parts, sub-assemblies, major assemblies, and installations are built to type design data.

Essential Functions:

• Perform ...

This job requires basic to advanced knowledge of the paint process including varying amounts of general paint applications as listed below. Job duties will vary each day as designated by the Lead or Manager.

Essential Job Functions

• Ensure masking is complete.
• Sand primer if necessary.
• Blow aircraft and clean with thinner.
• Wash ...
  
  IND18

JOB SUMMARY

This position requires an advanced knowledge of the paint process. The job includes varying amounts of general mechanical applications as listed below. Job duties will vary each day and are designated by the Paint Manager.

ESSENTIAL FUNCTIONS

• Make sure masking is complete.
• Sand primer if necessary.
• Blow ...

Currently Seeking Sheet Metal Assembly Mechanic in Savannah, GA with a Minimum of 2 years Structural Assembly Experience.

S-M Mechanic will get 3 weeks hands on training before working on the aircraft including experience with:

• Hiloks
• Sealant
• Drilling Closer Tolerance Holes

In a team oriented work environment, ...

CO5 – CNC Machine Operator – 5 axis is a primary desired skill set BUT will look at STRONG 3 or 4 axis contractors. “Strong” meaning at least 8 years in the aircraft industry

Contractors will be working on AFP (Automated Fiber Placement) Machines.

Stringer AFP - 3 Axis and

Skin AFP - 5 Axis

Must be able to both setup ...

• Manual deburring, grinding, polishing, trimming , finishing , cleaning, inspecting/measuring Steel, Aluminum, and Titanium parts
• Use of various hand tools and general equipment ( de-burring tools, power grinders, hand tools, vibratory equipment,…washing machines) and products (solvents , emery paper, polishing compounds, compressed air, etc.) to meet quality and customer ...

• Set-up and operate multiple CNC machines in accordance with established procedures and guidelines.
• Complete tasks accurately, according to specifications, and in a timely manner.
• De-burr, polishing and perform in-process verification of parts to drawing specifications
• Function within a flexible task operations system 
• Participate in a cross ...

Able to perform connector terminations including shielded wires, coaxial cables, and fiber optic wiring. Ability and understanding of routing instructions and handling of harnesses. Perform efforts associated with sealing, wrapping, bonding, tying, and closure of wire harnesses and cables in accordance with standard processes. Demonstrates the capability to read and interpret engineering drawings, ...

Currently seeking an Airworthiness Inspector for Savannah, GA

Airframe and Powerplant License required.

The Airworthiness Inspector physically inspects aircraft, aircraft components, and reviews related paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an ...

A client of ours located  in Indianapolis, IN location is seeking a Tech, Cabin to perform complex cabin functions such as: Galley Removal/Re-Installation, Lav Removal/Re-installation, Galley Mat Install, component level repairs as required, proficiently able to read all cabin drawings, and assist in operational checks as required.
 

They believe in limited supervision ...

The Composites Mechanic performs aircraft maintenance and/or repairs within estimated time and in accordance with applicable  FAA, and customer standards of quality.

• Fabricate parts as required.
• Layout and perform complex structural repairs.
• Follow all applicable specifications to accomplish a specific task.
• Maintain a clean and safe working ...

• Perform a variety of tests using a variety of test processes and equipment.
• Perform Continuity Isolation testing on Cables, Harnesses and Panels using Automated Test Equipment such as DIT-MCO, MPT1000, CKT and WETECH or by manually performing checks with Digital Multi-meters (DMM) and Hi-Pots.
• Perform in circuit testing mainly using the MDA (Manufacturing Defect Analyzers) ...

• Researches technical data and performs inspection, testing, adjusting, and repairing of avionics equipment, such as radar, radio, navigation, auto pilot, and compass systems, installed in aircraft in accordance with applicable maintenance manuals, FAA regulations and Ascent Aviation policies and procedures.
• Accomplished maintenance actions are concisely and accurately recorded ...

• Researches technical data and performs disassembly, repair, cleaning, adjustment, assembly, testing and calibration of aircraft components and company special tools and ground equipment in accordance with applicable maintenance manual and FAA regulations.
• Repairs, replaces and rebuilds aircraft structures such as wings and fuselage, and functional components including rigging, ...

Working storage checks Aircraft tie-down and mooring, Aircraft venting, Return to service from storage,  Airframe and engine sealing and preservation

Knowledge, Skills and Abilities: Ability to organize and plan work adhering to deadlines; attention to detail and mathematical skills; ability to read, write, and understand the English language and to follow ...

Perform such typical maintenance operations such as the removal and replacement of aircraft and powerplant components that require bolting, torquing, adjusting rigging and safety wiring, including powerplant and flight control removal and reinstallation
Repair, modify, replace or overhaul aircraft and aircraft systems to ensure airworthiness.
Perform work within estimated or budgeted ...

This Sheetmetal Technician role is responsible for supervising, mentoring and leading a group of sheetmetal technicians during, inspecting, repairing, modifying, and updating aircraft structures including primary, secondary and tertiary structures, frames, skins, flight controls, cowlings, doors, antenna mounts, doublers, special mission structures, etc.

Essential Functions Statement:

• Work in conjunction with the Avionics Supervisor and airframe, engine and sheetmetal department technicians to complete projects.
• Troubleshoot, inspect, repair, modify, and update aircraft systems.
• Ability to train junior avionics technicians.
• Troubleshoot, repair, modify, install, and update avionics systems as specified with minimal amounts of direct ...

Skill: Interior Technician

Duration: 6+ months

Location: Indianapolis IN

Aircraft: VIP

Job Description:

• Strong VIP completions experience
• Installation of cabinetry components, galleys, closets, trim, panels, carpet, etv.
• Performing ...
  
  IND18

Seeking an A&P Mechanic in Springfield, IL

This will be a Long Term Project

Position Description

• Accomplish assigned work in a timely manner.
• Remove and replace Engines, Flight Controls, Gear, and Doors.
• Able to rig Flight Controls.
• Perform Routine Maintenance Items on Falcon, Gulfstream, ...

• Inspect, and maintain upholstery, carpet, cabinetry, other cabin furnishings and equipment.
• Remove, disassemble, ...

Test and troubleshoot electronic circuitry to fault isolate and identify the malfunctioning discrete or active components (microcircuits, transistors, capacitors, resistors, etc.), with 4 or more years of related experience or an equivalent combination of education and experience. Capable of performing repairs and conducting final acceptance testing on avionic equipment. Capable of reading and ...

Seeking a Sheet Metal Mechanic in Nashville, TN

Examines, repairs, assembles, and tests aircraft accessories, such as engines, power brake units, auxiliary electric motors, spark igniters, valves, pumps, fuselage, wings, and oil and fuel tanks, using hand tools and testing devices, and following shop orders and manufacturer's specifications. 

JOB ...

Seeking a Sheet Metal Mechanic with an A license in Macon, GA

• Will be working heavy checks as well as other projects 
• Repair, fabrication, modification, and installation of sheet metal parts, items, and assemblies.
• Sheet metal mechanic work requires knowledge of the physical properties and working characteristics of sheet metal, ...

Seeking a Sheet Metal Mechanic in Macon, GA

• Will be working heavy checks as well as other projects 
• Repair, fabrication, modification, and installation of sheet metal parts, items, and assemblies.
• Sheet metal mechanic work requires knowledge of the physical properties and working characteristics of sheet metal, knowledge of tools and ...

Seeking a Sheet Metal Mechanic in Nashville, TN

Examines, repairs, assembles, and tests aircraft accessories, such as engines, power brake units, auxiliary electric motors, spark igniters, valves, pumps, fuselage, wings, and oil and fuel tanks, using hand tools and testing devices, and following shop orders and manufacturer's specifications. 

JOB ...

Seeking a Sheet Metal Mechanic in Nashville, TN

Examines, repairs, assembles, and tests aircraft accessories, such as engines, power brake units, auxiliary electric motors, spark igniters, valves, pumps, fuselage, wings, and oil and fuel tanks, using hand tools and testing devices, and following shop orders and manufacturer's specifications. 

JOB ...

Seeking A/P Mechanics in Nashville, TN -- Work will be performed on Regional Aircraft. 

Job Duties; Examines, repairs, assembles, and tests aircraft accessories, such as engines, power brake units, auxiliary electric motors, spark igniters, valves, pumps, fuselage, wings, and oil and fuel tanks, using hand tools and testing devices, and following shop orders and manufacturer's ...

Seeking A&P mechanics in Macon, GA

• Performs routine inspections or special maintenance to prevent failures of aircraft mechanical systems and components; performs complete operations checks on hydraulic systems, pneumatic systems, plumbing, precision assemblies, rigging and controls, etc.
• Determines when a component should be repaired or replaced; ...

Seeking Entry Level Cabinet Finishers in Savannah, GA

Under general supervision, prepares and applies finishes to aircraft furniture using aircraft specifications, designs and engineering drawings with a high level of safety, quality, detail and productivity. Assists team members with greater experience to enhance techniques supportive of quality workmanship.

Seeking a Sheet Metal Fabricator in Salt Lake City, UT

Job Description:    

Performs machine set-up, machining, welding set-up, welding, sheet metal fabrication and extrusion, tube bending and fabrication tasks. Performs composite lay-up, fabrication and assembly tasks. Assembles precision mechanical and electro-mechanical components. Assembles, ...

Currently seeking Entry Level Upholstery Technicians with experience using commercial sewing machines, sergers, and/or carpet trade in Savannah, GA

Under moderate supervision fabricate and install upholstery, cover panels, and make simple patterns for aircraft interiors using design/engineering drawings and aircraft specifications. 

Essential ...

Seeking an Assembly Mechanic in Tulsa, OK

• Perform structural assembly and fastener installation of components and assemblies 
• Sealing in confined spaces.
• Assure quality conformance to company/customer requirements and specifications.
• Responsible for assuring final quality acceptance of installations, structures, components and controls.
• Perform ...

Skill: Interior Technician

Duration: 3+ months (open ended)

Location: Oklahoma City OK

Aircraft: 737, MD-80, CRJ, ERJ, C-40

Salary: please call Strom Aviation for compensation details (800) 743-8988; Bonuses Offered

Description:

Must ...

• Perform removal, installation, and inspection functions of fuel cells and assembly, and installation of components such as fuel lines, hardware, and fittings on various aircraft.
• Analyze various aircraft sealing, structural, and assembly drawings, to detect seal level deficiencies.
• Diagnose results of leak test to detect drawing, specification, structural and ...

• Lays out, assembles, pre-fits, and bonds a variety of metal, composite or laminate fabrications, assemblies, parts, skins or equipment.
• Follows engineering and manufacturing specifications and orders to determine parts to be bonded and the temperature and pressure required.
• Cuts parts or materials to size. Operates autoclave, hydraulic presses and ovens to complete ...

Description/Comment:  

• To build a variety of routine sheet metal parts and assemblies. Works from blueprints, work orders, templates, oral and written instructions to fabricate and assemble sheet metal parts where detailed instructions are available but minor decisions and some judgment is required to meet specifications. Assists with the development ...

A&P Mechanics to perform aircraft maintenance. Looking for the following: Smaller aircraft experience (CORP, GA) Not a lot of commercial and/or large military experience Not factory work (not assembly, manufacturing)

Essential Functions Statement:

• Performs on-site aircraft inspections and repairs.
• Subject Matter Expert (SME) on maintenance ...

Looking for good Structures mechanics to work at a Commercial Aircraft Facility in Duluth, MN. Overtime available.

Will consider all types of large aircraft (ie Commercial, Regional,  Military) as long as they possess Sheet Metal Experience

(NOT CONSIDERING SHEET METAL ASSEMBLY EXPERIENCE, MUST HAVE REPAIR EXPERIENCE)

Crucial need for Sheet ...

Looking for experienced Structures mechanics to work at a Commercial Aircraft Facility in Duluth, MN. Overtime is available.

Will consider all types of large aircraft (ie Commercial, Regional,  Military) as long as they possess Sheet Metal Experience

(NOT CONSIDERING SHEET METAL ASSEMBLY EXPERIENCE, MUST HAVE REPAIR EXPERIENCE)

Crucial ...

IND18

Type of Aircraft: Commercial  Airbus, Boeing, McDonnell Douglas, will also consider Military Transport Aircraft such as C-130, C-17, C-5 or C-141

Longevity: Long Term

Quick Feedback: YES

Type of Work Environment: MRO, Climate Controlled

Summary:  

Strom ...

We are currently seeking A&P mechanics in Duluth, MN to perform the following tasks; 

• Repair, modify, replace or otherwise perform routine aircraft maintenance work in specialized area of aircraft.
• Rigged Flight Controls, Remove and Replaced Flight Controls
• Removed Replaced Landing Gear, engines
• Worked on Hydraulics and ...

We are currently seeking A&P mechanics in Duluth, MN to perform the following duties:

• Repair, modify, replace or otherwise perform routine aircraft maintenance work in specialized area of aircraft.
• Rigged Flight Controls, Remove and Replaced Flight Controls
• Removed Replaced Landing Gear, engines
• Worked on Hydraulics ...

With proven skills proficiency, install, inspect, test, adjust, and repair aircraft avionics equipment and systems.  Perform operational tests and functional checks on aircraft avionics systems, and troubleshoots and corrects problems.  Read blueprints and schematics.  Reads and complies with instructions and safety information as necessary for proper and safe completion of assigned ...

Job Requirements:

• Looking for candidates with 5+ years experience on Commercial (Boeing, MD80/90) aircraft for the PREMIUM position.  
• Cargo Door mod experience or simply heavy structures and mod experience will be considered, not any Sheetmetal assembly type work.  
• Willing to look at resumes with Military type C-40A/B/C ...

POSITION SUMMARY:  Skilled level in performing work relating to aircraft interior installation, repair and removal due to aging, customization or modification.  Interiors Technician repairs, builds, troubleshoots and performs installation and fabrication work on pieces found within the aircraft interior. Reads and complies with instructions and safety information as ...

Completes assigned aircraft tasks as directed by Flight Line Crew Chief or supervisor, including open and incomplete planning, one shots, rework, and production test and production acceptance test procedures in compliance with written or verbal instructions.

This position will require the flexibility to work 1st or 2nd shift.

Primary Responsibilities:
Follow ...

Currently seeking Entry Level Avionics Technicians in Savannah, GA to work in a Repair Station environment 

• Assists in troubleshooting and repairing system discrepancies to ensure minimum schedule impact.
• Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality. 

Principal ...

IND18

Currently seeking Aircraft Painters with only 1 year of Aircraft Painting experience in Savannah, GA

The Aircraft Painter I prepares the aircraft for paint related operations by performing tasks safely within schedule while meeting quality expectations.

Essential Functions:

• Mask, sand, and prepare aircraft for paint application.
• Apply ...

• The technician makes repairs to C-130 aircraft. Install system modifications and install cables & cable assemblies for C-130 Avionics upgrades.
• Terminate wires and connectors; perform continuity testing. Install complex mission systems and the provisions for electronic counter measures in C-130 aircraft
• Researches technical data and performs inspection, testing, ...
  
  IND18

Skill: Aircraft Component Repair Tech Sr

Duration: 3+ months (open ended)

Location: Cahokia IL

Aircraft: Gulfstream

Salary: please call Strom Aviation for compensation details (800) 743-8988 

Description: Working with a high degree of independence, ...

General

• Has intermediate knowledge of all areas of the aircraft and assigned work area.

• Repair, modify, replace or otherwise perform routine aircraft maintenance work in specialized area of aircraft.

• Develop repair schemes utilizing SRM or Engineering data

• Communicate effectively with other maintenance personnel ...

• Team with others to set-up, operate and inspect parts on conventional and Computerized Numerical Controlled (CNC) machines and mediums to assure the timely production and delivery of quality products to the customer. Work from drawings, documents, process specifications, quality control requirements, and established processes or procedures. Perform multi-tasking and multi-machine ...

Will be removing and installing interiors and doing composite lay ups in the composite shop for the interiors.  Needs Tedlar experience / Composite repair experience @ MRO

Interior Back-Shop Technicians will be working in a Shop setting repairing, replacing, refurbishing and performing minor composite repairs on all aircraft interior parts (e.g., Ceiling Panel, Floor Panel, Side ...

Aircraft Mechanic II –Electrician/Avionics applies basic and some advanced technical knowledge to solve routine problems by interpreting manufacturers’ manuals or similar documents. Work requires familiarity with the interrelationships of circuits and judgment in planning work sequence, in selecting tools, testing instruments, and is reviewed for compliance with accepted practices. ...

Skill: Sheetmetal Technician Sr

Duration: 3+ months (open ended)

Location: Cahokia IL

Aircraft: Gulfstream

Salary: please call Strom Aviation for compensation details (800) 743-8988 

Description:The Sheetmetal Technician Senior works under ...

Skill: Sheetmetal Technician Sr

Duration: 3+ months (open ended)

Location: Cahokia IL

Aircraft: Gulfstream

Salary: please call Strom Aviation for compensation details (800) 743-8988 

Description:The Sheetmetal Technician Senior works under ...

Skill: Sheetmetal Technician Sr

Duration: 3+ months (open ended)

Location: Cahokia IL

Aircraft: Gulfstream

Salary: please call Strom Aviation for compensation details (800) 743-8988 

Description:The Sheetmetal Technician Senior works under ...

Skill: Sheetmetal Technician Sr

Duration: 3+ months (open ended)

Location: Cahokia IL

Aircraft: Gulfstream

Salary: please call Strom Aviation for compensation details (800) 743-8988 

Description:The Sheetmetal Technician Senior works under ...

Skill: Sheetmetal Technician Sr

Duration: 3+ months (open ended)

Location: Cahokia IL

Aircraft: Gulfstream

Salary: please call Strom Aviation for compensation details (800) 743-8988 

Description:The Sheetmetal Technician Senior works under ...

Skill: Cabinetmaker Sr

Duration: 3+ months (open ended)

Location: Cahokia IL

Aircraft: Gulfstream

Salary: please call Strom Aviation for compensation details (800) 743-8988

Description:

Under general supervision, fabricates the most complex ...

Skill: Cabinetmaker Sr

Duration: 3+ months (open ended)

Location: Cahokia IL

Aircraft: Gulfstream

Salary: please call Strom Aviation for compensation details (800) 743-8988

Description:

Under general supervision, fabricates the most complex ...

Skill: Sheetmetal technicians.  

Location: Miami, FL

Aircraft: Commercial (Boeing, Airbus, etc.)

Compensation: Please call Strom Aviation for compensation details 800.743.8988

Must be able to accomplish any and all repairs, modification, E.A.'s, etc, with minimal or no supervision on commercial and regional aircraft.  Must be able to use SRM, ...

We are in need of  A&P technicians!! Projects include – B757, B767, A-320s. Candidates need to have at least 3 years of heavy A&P experience. An A&P license required. Duration – at least 3 months, Shift – 1st or 3rd. 

The Technician B, A&P is responsible for performing basic maintenance tasks without supervision. ESSENTIAL DUTIES AND RESPONSIBILITIES ...

Skill: Avionics Technician

Duration: 3+ months (open ended)

Location: Oklahoma City OK

Aircraft: 737, MD-80, CRJ, ERJ, C-40

Salary: please call Strom Aviation for compensation details (800) 743-8988; Bonuses Offered

Description:

Must ...

Skill: Avionics Junior Technician

Duration: 3+ months (open ended)

Location: Oklahoma City OK

Aircraft: 737, MD-80, CRJ, ERJ, C-40

Salary: please call Strom Aviation for compensation details (800) 743-8988; Bonuses Offered

Description:

Must ...

Skill: A&P Mechanic (0-1 Years)

Duration: 3+ months (open ended)

Location: Oklahoma City OK

Aircraft: 737, MD-80, CRJ, ERJ, C-40

Salary: please call Strom Aviation for compensation details (800) 743-8988

Description:

Must be able ...

Currently seeking CNC Technicians with a minimum of 1 year of experience in Savannah, GA

Set up and operate automated machines to fabricate parts, applying knowledge of shop theory and procedures, shop mathematics, maintainability materials and layout techniques. 

Essential Functions:

• Under supervision, operate ...

Currently seeking Structure Assembly Mechanics in Tulsa, OK

In a team oriented work environment, under little to no supervision, perform a variety of structural assembly operations using required tools and appropriate prints, specs and operational requirements to complete work assignment, and ensure conformance to specification. May assist and instruct other team members. 

S-M ...

Currently seeking Avionics/Electrical Technicians in Savannah, GA

Provides technical expertise in testing aircraft systems, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality. May fill in for the Senior ...

• Avionics Technicians needed for troubleshooting and installation on CRJ 200 Regional Jets 
• Researches technical data and performs inspection, testing, adjusting, and repairing of avionics equipment, such as radar, radio, navigation, auto pilot, and compass systems, installed in aircraft in accordance with applicable maintenance manuals, FAA regulations and Ascent Aviation ...

Currently seeking Entry Level Sheet Metal Mechanics for an Operations Trainee position in Savannah, GA

This is an entry-level position in which the individual will be trained in the manufacturing processes of the aircraft. In a team environment, under direct supervision, perform a variety of structural assembly operations in a production department.

S-M ...

• Maintain the daily operation of the Repair Station in compliance with all applicable Code of Federal Regulations, Repair Station Procedures, customer requirements, and manufacturer’s recommendations.
• Promote and support all  safety initiatives and programs.
• Verify Vendor approval status;
• Verify Raw Material Certification, as required;

• The Aircraft Mechanic I (Electrical)troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems.
• This mechanic repairs, replaces, and rebuilds aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, ...

Performs modification of P-3 aircraft and major subassembly's.

Must be able to:

- Read and interpret engineering drawings, technical manuals, structure repair manuals, understanding symbols, flags, and general notes.
- Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited ...

• Perform work on assigned aircraft or parts in the mechanical functions. Tasks include fabrication, repair, and installation of aircraft parts, maintenance and repair of helicopters and support of helicopter specific programs.
• This assignment is expected to be approximately 6+ months in duration.

DUTIES:

Perform fabrication, assembly, ...

POSITION SUMMARY:  Perform a basic to advanced level skilled work to identify, remove, and install aircraft components and to perform servicing of engines and aircraft accessories to ensure airworthiness according to customer specifications and FAA standards. Reads and complies with instructions and safety information as necessary for proper and safe ...

Location: Springfield, MO

Compensation: Please call a Strom Aviation Representative for details 800.743.8988

Duration: Long term work (open ended)

Strom Aviation is currently seeking A&P Mechanics to perform maintenance on EMB120, Saab 340, Saab 2000 and EMB 145. 

Client performs variety of maintenance checks. 

1st Shift position ...

Seeking an Avionics Technician in Springfield, MO
Avionics Technician to perform installations and troubleshooting on turboprop aircraft. Looking ideally for DHC-8, Saab 340, and Emb-120 experience. Will consider other commuter type a/c as well.

Technician will install, inspect, test, adjust, or repair avionics equipment, such as radar, radio, and navigation ...

Job Summary: Looking for a structures / sheetmetal mechanic for a contract in Springfield, MO. Will be performing repairs on EMB-120, Saab 340 and Metros. Prefers a A&P license.

New higher rates!

Monday – Friday 1st shift schedule!

Overtime available!

Long term work with advancement opportunities!

Working EMB120’s, Saab ...

Currently seeking Repair Station Component Repair Technician with CNC Machinist experience in Savannah, GA

Under minimal supervision, repair and overhaul internal and external aircraft assemblies, subassemblies and components in accordance with Gulfstream Repair Station requirements. 

Essential Functions:

• Apply ...

Skill: Sheetmetal Junior Mechanic

Duration: 3+ months (open ended)

Location: Oklahoma City OK

Aircraft: 737, MD-80, CRJ, ERJ, C-40

Salary: please call Strom Aviation for compensation details (800) 743-8988; Bonuses Offered

Description:

Must ...

Skill: Sheetmetal Mechanic

Duration: 3+ months (open ended)

Location: Oklahoma City OK

Aircraft: 737, MD-80, CRJ, ERJ, C-40

Salary: please call Strom Aviation for compensation details (800) 743-8988; Bonuses Offered

Description:

Must ...

Current seeking Cabinet Finishers in Savannah, GA

Under general supervision, prepares and applies finishes to aircraft furniture using aircraft specifications, designs and engineering drawings with a high level of safety, quality, detail and productivity. Assists team members with greater experience to enhance techniques supportive of quality workmanship.

Currently seeking Interior Installation Technicians in Savannah, GA

Position Purpose:

The Interior Installation Technician II works under general supervision to remove, install, and/or fabricate aircraft interiors, which may include items such as trim, carpet, sound proofing, light structure, cabinetry, panels and other accessories. All work ...

Currently seeking Interior Installers with 1 Year experience in Savannah, GA

The Interior Installation Technician I works under close supervision to remove and install and/or fabricate aircraft interiors by using company operating procedures and quality standards.

Essential Functions:

• Safely perform aircraft removal, ...

Job Description Solar Panel Assembly

Performs simple production assembly operations on structural and mechanical assemblies, subassemblies, using manual operations. Job Summary: Performs a variety of technical manufacturing production assembly operations where accurate visual acuity and manual dexterity are required to fabricate production solar cell assemblies and solar ...

This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required ...

• Perform maintenance such as preservation/de-preservation and removal and repair of airframe components
• Perform inspections (25hr/30day, 6mo inspections, 12 month, 24 month etc)
• Under supervision, assist/perform major inspections, and repairs
• Assist with prep for fly offs
• Understand safe and applicable use for basic hand tools
• Learn ...

• Installation of Bell, AA, and other aftermarket kits
• Performing major and minor repairs and alterations to aircraft structure, to include sheet metal, composite repairs, and fabrications
• Fabrication ...

Installation of avionics systems and kits in Bell commercial helicopters.  Must have several years of avionics experience that includes terminating connectors in a non-military environment.  Need several years of connector terminating experience as that is the majority of the work they will be performing.

• Familiarity with wiring schematics and electrical principles
• Ability ...

Sheetmetal Installation: 80%

• Read detailed plans and diagrams and inspect and measure parts prior to assembly, making sure parts are free of defects and   are the right size.
• Install Sheet metal parts and assemblies in aircraft; assure that installations are attached without endangering aircraft structure or systems operations and functions.
• Cut, ...

• Avionics Technicians needed for troubleshooting and installation on CRJ 200 Regional Jets 
• Researches technical data and performs inspection, testing, adjusting, and repairing of avionics equipment, such as radar, radio, navigation, auto pilot, and compass systems, installed in aircraft in accordance with applicable maintenance manuals, FAA regulations and Ascent Aviation ...

Skill: Sheetmetal Mechanic

Duration: 3+ months (open ended)

Location: Tucson/Marana, AZ

Aircraft: MD-80, CRJ

Salary: please call Strom Aviation for compensation details (800) 743-8988

Description:

Sheetmetal Mechanics contractors ...

Interior Technicians to remove and reinstall interiors on commercial aircraft in a MRO setting in Marana, AZ

• Interior re-configurations and maintains standardization of interiors.
  Inspects and maintains aircraft cabin interior furnishings on a regular, recurring basis.
• Perform such typical maintenance operations such as the removal and replacement of aircraft ...

The Composites Mechanic performs aircraft maintenance and/or repairs within estimated time and in accordance with applicable  FAA, and customer standards of quality.

• Fabricate parts as required.
• Layout and perform complex structural repairs.
• Follow all applicable specifications to accomplish a specific task.
• Maintain a clean and safe working ...
  
  IND18

• Accept or reject work accomplished for all items generated on the inspection forms.
• Responsible for the surveillance of all work in progress.
• Assure that all work inspected is in accordance with current FAA approved technical data.
• Assure that all routine, non-routine, and customer request work cards are correctly completed and properly signed off.

Location: Marana AZ

Duration: 3 - 6 months

Aircraft: Commercial aircraft (Boeing, Airbus etc)  Wide Body facility

Description: Current need for contractors with experience working Commercial aircraft such as the 747

• A minimum of 5 years related aircraft experience performing heavy maintenance and modifications.  
• Experience with ...

• Researches technical data and performs disassembly, repair, cleaning, adjustment, assembly, testing and calibration of aircraft components and company special tools and ground equipment in accordance with applicable maintenance manual and FAA regulations.
• Repairs, replaces and rebuilds aircraft structures such as wings and fuselage, and functional components including rigging, ...

• Researches technical data and performs disassembly, repair, cleaning, adjustment, assembly, testing and calibration of aircraft components and company special tools and ground equipment in accordance with applicable maintenance manual and FAA regulations.
• Repairs, replaces and rebuilds aircraft structures such as wings and fuselage, and functional components including rigging, ...

Performs routine tool set up activities. Makes minor repairs. Performs manufacture, assembly and fabrication of tools. Operates various factory support equipment to move materials and tools as required. Provides tooling support to other organizations. Assists in determining fabrication and assembly processes for the design. Assists in reverse engineering design and fabrication processes for parts.

Machining ...

Currently seeking Entry Level Avionics Installers in Savannah, GA

Under moderate supervision, assists in the removal/installation of avionics electrical components, fabrication of wire harnesses, installations, terminations, ring-out, and functional tests of avionics/electrical systems 

Essential Functions:

• Assists ...

Skill: A&P Mechanic

Duration: 6-12 months

Location: Balad, Iraq

Aircraft: Cessna Caravan

Salary: please call Strom Aviation for compensation details (800) 743-8988

Description:

Must be able to perform flight control and engine throttle ...

• Repair/replace aircraft structural components according to drawings, blueprints, directives, technical manuals and safety procedures
• Perform sheet metal bends to guidelines and specifications as dictated in normal aviation practices
• Remove existing rivets from aircraft structure 
• Work with and around a variety of chemicals and follow all OSHA standards ...

Lays out, fabricates assembles, mates, installs and functionally tests, checks or troubleshoots, and repairs production and
prototype aircraft structures, parts and assemblies, mechanical and pneumatic. Performing work in this job occupational
field requires the application of procedures, processes, and methods learned through technical and on-the-job training.
Major ...

Skill: Aircraft Line Service Tech

Duration: 3+ months (open ended)

Location: Augusta, GA

Aircraft: King Air or Hawker

Salary: please call Strom Aviation for compensation details (800) 743-8988   

Description:

The Aircraft ...

Seeking an Avionics/Electrical Technician in Brunswick, GA

• Demonstrates technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting.
• Performs the installation and functionally testing of electrical/avionics components and systems on aircraft per Engineering specifications, drawings and maintenance manuals ...

• Perform FOD (foreign object debris) monitoring tasks in support of the SLS
• Perform walk downs of the FOD area at the beginning of each shift
• Monitor tool controls and provide coaching on tool and part procedures
• Monitor personnel entering or exiting FOD critical areas
• Log in/out shop consumables, small parts and tools, verify proper ...

• Assembles, disassembles and/or modifies systems by changing, removing, replacing or upgrading aerospace vehicle components to correct failures or implement changes.
• Oversees assembly, disassembly or overhaul.
• Configures aerospace vehicles and bench test equipment. Troubleshoots complex pneumatic, hydraulic and electrical systems to isolate mechanical or electrical ...

Electrical Technician required with current active U. S. Interim Secret Security Clearance and ability to obtain U. S. Secret Security Clearance post-start. 

Assembles, disassembles and/or modifies systems by changing, removing, replacing or upgrading aerospace vehicle components to correct failures or implement changes. Able to perform connector terminations including shielded ...

AVIATION ELECTRONICS/ELECTRICIAN TECHNICIAN (AT/AE). Electronics technician will have sufficient knowledge and skills, including in-depth system operation, diagnostic testing, troubleshooting, and repair procedures, to perform organizational maintenance for the following systems on the F/A-18E/F aircraft Multipurpose Display Group (MDG), Tactical Aircraft Moving Map Capability (TAMMAC) System, ...

Currently seeking Senior Aircraft Technicians in Savannah, GA

Independently perform a variety of aircraft modifications and maintenance functions such as removal and installations of airframes, landing gear, engine components, electrical components, and control systems to assure conformance to procedures, performances and test specifications.

Essential ...

• To identify malfunctions, remove, repair and install a limited variety of aircraft communication, navigation, avionics, and electrical components.
• Perform analysis of routine electrical and avionics malfunctions according to standard shop practices using some equipment such as voltmeters, ohmmeters and continuity lights.
• Perform minor repair such as replacing wires ...

Currently seeking Entry Level CNC Technicians in Tulsa, OK

Set up and operate automated machines to fabricate parts, applying knowledge of shop theory and procedures, shop mathematics, maintainability materials and layout techniques. 

Essential Functions:

• Under supervision, operate automated machine using existing ...

Currently seeking Structure Assembly Mechanics with Minimum of 1 year experience in Tulsa, OK

S-M Mechanic will get 3 weeks hands on training before working on the aircraft including experience with:

• Hiloks
• Sealant
• Drilling Closer Tolerance Holes

In a team oriented work environment, under minimal supervision, ...

Must be able to perform intermediate/heavy maintenance tasks with minimal or no supervision on Boeing 737, 777 aircraft.  Must be able to perform flight control and engine throttle rigging.  Must be able to use the FAA approved data proficiently (ie IPC, M/M, OHM, SRM).  Must be able to perform excellent quality work.  Document maintenance performed on required forms.  Must ...

Services, repairs, and overhauls aircraft and aircraft engines to ensure airworthiness by performing the following duties:

• Process daily incoming and outgoing material to meet Quality Control requirements as stated in the ISO 9000 Procedures Manual and Customer Requirements Manual.
• Assist the Director of Quality Control in reviewing and updating department standards.
• Interface ...

• Maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise ...

Skill: Avionics Installer

Duration: 3+ months (possible temp to perm)

Location: Grand Junction CO

Aircraft: Challenger, Lear Jets, Hawkers, etc

Description:

For this position candidates will be performing avionics installations on corporate aircraft such as Challenger, ...

IND18

Currently seeking Aircraft Component Repair Technicians in Savannah, GA

Under moderate supervision, repair and overhaul internal and external aircraft assemblies, subassemblies and components in accordance with Gulfstream Repair Station requirements. 

Essential Functions:

• Develop and apply basic skills in procedures, ...

GENERAL

The Mechanic reports to the Maintenance Department Manager.

RESPONSIBILITIES

The work of a mechanic consists of any and all tasks generally recognized as, but not limited to, a mechanic's work on or about aircraft, its component parts and related equipment performed at line stations, major stations and ...

Looking for candidates with 5+ years experience on Commercial (Boeing, MD80/90) aircraft for the PREMIUM position.  Cargo Door mod experience or simply heavy structures and mod experience will be considered, not any Sheetmetal assembly type work.  

A&P license preferred but not required.

POSITION SUMMARY:  Perform ...

1. Installs, inspects, tests, adjusts, and repairs aircraft avionics equipment and systems, including radio systems, radar, and navigation systems.
2. Troubleshoots and corrects problems related to avionics systems through the use of wiring diagrams and maintenance manuals. Reads blueprints and schematics.
3. Lays out installation of aircraft avionics assemblies and systems.
4. Sets ...
   
   IND18

POSITION SUMMARY:  Perform a basic to advanced level skilled work to identify, remove, and install aircraft components and to perform servicing of engines and aircraft accessories to ensure airworthiness according to customer specifications and FAA standards. Reads and complies with instructions and safety information as necessary for proper and safe completion of assigned ...

Currently seeking Aircraft Component Repair Technicians in Savannah, GA

Under moderate supervision, repair and overhaul internal and external aircraft assemblies, subassemblies and components in accordance with Gulfstream Repair Station requirements. 

Principal Duties and Responsibilities:

Essential Functions:

•  Apply ...

Currently seeking Cabinet Builders in Savannah, GA

Under direct supervision, learns and performs the basic skills and functions related to fabrication of aircraft cabinets and other wood-surfaced subassemblies using design and engineering drawings.

Essential Functions:

• Learns entry-level technical skills and knowledge, regulatory ...

The Structures Mechanic is responsible to inspect, overhaul, repair, modify, and troubleshoot airframe parts, systems, and components.

The Structures Mechanic is responsible to perform work within estimated time and within FAA, and customer standards of quality.  

Perform sheetmetal repairs during Heavy checks on Commercial aircraft 

Ability to follow and ...

1. Perform such typical maintenance functions as cabling, component removal/installation, wire harness removal/installation, fabrication/repair of wire assemblies, and continuity checks.
2. Determine if work can safely be accomplished if aircraft is in a power-on mode and be able to conduct necessary testing if in a power-on mode.
3. Fabricate and install all wiring assemblies, static ...

In search of a licensed A&P Mechanic is Lake City, FL

• Researches technical data and performs disassembly, repair, cleaning, adjustment, assembly, testing and calibration of aircraft components and company special tools and ground equipment in accordance with applicable maintenance manual and FAA regulations.
• Repairs, replaces and rebuilds aircraft structures ...

• Effectively perform R&E routine work associated with heavy aircraft A, B, C and D checks.
• Detailed knowledge of aircraft avionics and electrical systems.
• Understand engineering methodology for systems installations.

WORK ENVIRONMENT

The environmental characteristic for this position is a warehouse setting. Candidate should be able to ...

Perform work on assigned aircraft or parts in the following functions: Maintenance and Repair.

DUTIES

Perform fabrication, assembly, installation, maintenance, replacement, repair modification, inspection and the operational and functional checkout of aircraft mechanical or structural systems and major components. Perform troubleshooting functions of complete operating ...

Aircraft Technician A - Sheet metal will perform work on assigned aircraft, assemblies, and parts in sheet metal area.

This position is expected to be approximately six (6) months in duration.

Primary Responsibilities:

Sheetmetal Installation: 80%

• Read detailed plans and diagrams and inspect and measure parts prior ...

The Aircraft Technician A Avionics/Electrical will perform work on assigned aircraft, assemblies, and parts using a basic understanding of electrical properties. 

This assignment is expected to be approximately six (6) months in duration.

Primary Responsibilities:

• Read detailed plans and diagrams to determine component locations.
• Install ...

POSITION SUMMARY:  With proven skills proficiency, install, inspect, test, adjust, and repair aircraft avionics equipment and systems.  Perform operational tests and functional checks on aircraft avionics systems, and troubleshoots and corrects problems.  Read blueprints and schematics.  Reads and complies with instructions and safety information as necessary ...

Sheet Metal Essential Functions: -  Inspect, overhaul, repair, modify and troubleshoot airframe and/or powerplant parts, systems, and components utilizing approved maintenance documents. - Support engineering in developing repairs and modifications for transport category airplanes.  -Assist engineers by utilizing fundamental design principals and knowledge of metals and metal fabrication. ...

IND18

The Maintenance Technician is an essential member of an award-winning service delivery team who ensures each assigned aircraft is meticulously managed including maintenance, record keeping, detailing, and is safe for flight. The Maintenance Lead must be detail oriented and have excellent communications skills.

This job includes varying amounts of parts replacement or repair, electrical ...

Perform general avionics support items on aircraft.  This shall include, but not be limited to items such as removal and installation of panels and components and repair work.

• Troubleshooting and evaluation of systems on the aircraft when designated.
• Inspection and evaluation of the aircraft and components when designated.
• Maintenance and repair of ...

Currently seeking Upholstery Technicians with a minimum of 2 years Upholstery experience - (Aerospace Experience Preferred But Not Required) - in Savannah, GA

Under minimal supervision fabricate and install upholstery, cover panels, and make simple patterns for aircraft interiors using design/engineering drawings and aircraft specifications. 

Essential ...

Currently seeking Sheetmetal Assembly Mechanics in Savannah, GA with a Mimimum of 3 Years Structural Assembly Experience. 

In a team oriented work environment, under little to no supervision, perform a variety of structural assembly operations using required tools and appropriate prints, specs and operational requirements to complete work assignment, and ensure ...

Currently seeking Operations Trainee in Tulsa, OK

This is an entry-level position in which the individual will be trained in the manufacturing processes of the aircraft. In a team environment, under direct supervision, perform a variety of structural assembly operations in a production department.

Essential Functions:

• Under ...

• Seeking licensed A&P Technicians with 3+ years aircraft experience, preferably with some on helicopters. Our client is looking for candidates with modification and aircraft troubleshooting experience.  Candidate will perform inspections, A&P repairs, services and modifications to helicopter airframe and engines in accordance with FAA and client requirements and guidelines.
• Perform ...

Immediate need as we are looking for qualified Inspectors to work in Peru, IN ASAP. Current aircraft being worked are Jet Blue, UPS, Air Canada and American Airlines. Gen Fam’s (preferred but not required) we are seeking experience on: A319, 320, or 320’s. Also B757, A300, MD-11, or CRJ. Candidates will perform inspection duties on narrow body and regional jet aircraft in ...

Currently seeking Aircraft Painters with only 1 year of Aircraft Painting experience in Savannah, GA

The Aircraft Painter I prepares the aircraft for paint related operations by performing tasks safely within schedule while meeting quality expectations.

Essential Functions:

• Mask, sand, and prepare aircraft for paint application.
• Apply ...

• Perform general to complex maintenance task on assigned aircraft and related systems. This shall include, but not limited to items such as removal and installation of panels and components, repair work, and sheet metal repair or installation.
• Perform aircraft mechanic duties that require an advance level of knowledge, training of junior level technicians or troubleshooting repairs.
• Examines, ...
  
  IND18

Seeking Senior Aircraft Painters in Savannah, GA

The Senior Aircraft Painter works independently to safely prepare, paint and detail aircraft according to schedule using company quality standards and operating procedures. Act on behalf of the Lead in their absence and provide assistance and work direction to other painters. 

Essential Functions:

• Safely ...

Currently seeking Cabinet Builders in Savannah, GA

• Under general supervision, fabricates aircraft furniture and other wood-surfaced subassemblies using aircraft specifications, design and engineering drawings with a high level of safety, quality, detail and productivity.
• Assists team members with greater experience to enhance techniques supportive ...

Seeking licensed A&P mechanics in Wilmington, OH

Candidates will be working on  727, 757, 767 and other commercial type aircraft that client performs maintenance on.  

What you will do:  This position will perform troubleshooting, inspections, routine and non-routine maintenance on customer aircraft in accordance with applicable ...

• Painters will apply finishes to a variety of parts, assemblies and/or completed aircraft.
• Working from oral and written instructions and established procedures, prepare painted surfaces, spray primers or various paint finishes to parts, assemblies or completed aircraft.
• Uses some judgment in obtaining desired finish and may work under the guidance and instruction ...

Component Structure Mechanics will maintain, inspect, repair, modify, overhaul and troubleshoot commercial aircraft components such as flaps, slats, rudder and cargo doors in compliance with policies, manuals, procedures and requirements.

• Repair, replace, and rebuild components

• Utilize OEM and Engineering drawings to modify aircraft components

• ...

Currently seeking Quality Control Inspectors with a minimum of 1 year Quality Control Experience in Tulsa, OK

In a team oriented environment, perform all tasks in Initial Phase Manufacturing, Composites, or Final Phase in a timely and efficient manner to ensure aircraft parts, sub-assemblies, major assemblies, and installations are built to type design data.

• Cuts fiberglass, kevlar or graphite cloth to size, following template or blueprints, using cutting machine, scissors, or knife.
• Marks identifying information on material and assembles materials in kits for subsequent laminating.
• Applies parting agent to mold or bonding fixture.
• Impregnates cloth with resins by dipping cloth in solutions, feeding cloth between ...

Skill: Avionics Technician (1-5 Years)

Duration: 6+ months (open ended)

Location: Florence SC

Aircraft: Beechcraft experience preferably B-99, B-1900

Salary: please call Strom Aviation for compensation details (800) 743-8988

Description:

Avionics ...

IND18

• Receive, label, preserve, take photos and establish warehouse stocking locations for all material brought into the warehouse for resale
• Assist shipping and receiving by unloading trucks and receiving material into the warehouse
• Sort and position parts, components, and related material on racks, shelves or bins according to either a predetermined inventory location ...

Description:
For this position candidates will be performing routine and non routine maintenance on corporate aircraft such as Challenger, Lear Jets, Hawkers, etc. Candidates will be provided limited training, so looking for those who can work with little to no supervision. Looking for A&P technicians with corporate experience preferred, fixed wing required. Typically ...

IND18

Currently seeking an Aircraft Technician with a minimum of 1 year experience for a Repair Station in Savannah, GA

The Aircraft Technician I, under close supervision, performs or assists with inspection, maintenance, and repair of basic aircraft systems and structures.

Essential Functions:

• Communicate as required to receive ...

Currently seeking Aircraft Mechanics at a Repair Station in Savannah, GA

Under minimal supervision, performs inspections, maintenance, and repairs of moderate to advanced complexity on aircraft systems and structures.

Essential Functions:

• Communicate as required to receive and understand work assignments.
• Perform ...

Currently seeking Interior Installation Technicians for a Repair Station in Savannah, GA

The Interior Installation Technician II works under general supervision to remove, install, and/or fabricate aircraft interiors, which may include items such as trim, carpet, sound proofing, light structure, cabinetry, panels and other accessories. All work performed should be in ...

Currently seeking Avionics/Electrical Technicians for a Repair Station in Savannah, GA

Provides technical expertise in testing aircraft systems, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality. ...

Seeking a Sheetmetal Technician in Boise, ID
The Structures Technician will perform structure maintenance, repair and/or modification on customer aircraft in
accordance with applicable technical data, customer maintenance program requirements, within estimated or
budgeted hours, and within FAA and customer standards of quality under the direction and supervision ...

Seeking Aircraft Painters for a Repair Station in Savannah, GA 

The Aircraft Painter II works under minimum supervision to safely prepare, paint and detail aircraft according to schedule using company quality standards and operating procedures.

Essential Functions:

• Safely perform aircraft preparation, painting, and detailing ...

Essential Duties and Responsibilities:

• Studies blueprints, sketches, drawings, manuals, specifications, or sample parts to determine dimensions and tolerances of finished workpiece, sequence of operations, and setup requirements.
• Measures, marks, and scribes dimensions and reference points on material or workpiece as guide for subsequent machining.
• Selects, ...

Currently seeking Production Painters with Minimum of 1 Year Experience in Painting/Paint Preperation in Savannah, GA

Under supervision, effectively prepare and paint major sub-assemblies and other parts of aircraft in production made according to specifications and schedule requirements. 

Essential Functions:

• Mix ...

Currently seeking Interior Installer Sr's in Savannah, GA

The Interior Installation Technician Senior works under limited supervision to remove, install, and/or fabricate aircraft interiors, which may include items such as trim, carpet, sound proofing, light structure, cabinetry, panels and other accessories. All work performed should be in accordance with company ...

Location: Tucson

Duration: 3 - 6 months

Aircraft :  Commercial aircraft (Boeing, Airbus etc)  Wide Body facility

Description: Current need for contractors with ...

Currently seeking Sheetmetal Assembly Mechanics in Savannah, GA with a Mimimum of 4 Years Structural Assembly Experience. 

S-M Mechanic will get 3 weeks hands on training before working on the aircraft including experience with:

• Hiloks
• Sealant
• Drilling Closer Tolerance Holes

In a team ...

Currently seeking an Entry Level Aircraft Painter for and Aircraft Prep Trainee position in Savannah, GA

The A/C Prep Trainee works along side higher level employees to assist with the preparation and painting of aircraft.

Essential Functions:

• Assists in the preparation of the exterior surfaces of aircraft for application ...

Currently seeking a Productions Painter for Savannah, GA

Under moderate supervision, effectively prepare and paint major sub-assemblies and other parts of aircraft in production made according to specifications and schedule requirements.
 

• Perform a variety of activities including preparation of surfaces and mixing paints.
• Paints ...

Currently seeking Senior Upholstery Technicians in Savannah, GA

Work independently to design, fabricate, and install upholstery and trim items in aircraft interiors. Assist Shop Lead by overseeing projects and providing guidance and direction to co-workers. Mentor and train other Upholstery Technicians.

Essential Functions:

• Fabricate ...

Currently seeking Senior Aircraft Mechanics in Savannah, GA

Independently perform a variety of aircraft modifications and maintenance functions such as removal and installations of airframes, landing gear, engine components, electrical components, and control systems to assure conformance to procedures, performances and test specifications.

Essential ...

Currently seeking Aircraft Mechanics in Savannah, GA

Under minimal supervision, performs inspections, maintenance, and repairs of moderate to advanced complexity on aircraft systems and structures.

Essential Functions:

• Communicate as required to receive and understand work assignments.
• Perform complex aircraft ...

Currently seeking Avionics Installers in Savannah, GA

Under minimal supervision, assists in the removal/installation of avionics electrical components, fabrication of wire harnesses, installations, terminations, ring-out, and functional tests of avionics/electrical systems.

Assists in installations, modifications, and the fabrication of wiring and electrical ...

Current seeking Senior Avionics/Electrical Technicians in Savannah, GA

Provides leadership, technical expertise and guidance while performing various operational, functional tests and repairs of avionics/electronic, aircraft equipment and systems to ensure a defect free aircraft. Provides superior technical expertise in testing, troubleshooting and repairing system discrepancies ...

• Accept or reject work accomplished for all items generated on the inspection forms.
• Responsible for the surveillance of all work in progress.
• Assure that all work inspected is in accordance with current FAA approved technical data.
• Assure that all routine, non-routine, and customer request work cards are correctly completed and properly signed off.

Currently seeking a upholsterer for a new upholstery shop in Bangor, ME. Candidates must have 3+ years of previous aviation upholstery experience and must be able to sew with knowledge of various styles of stitching. Candidates will be cutting leather and fabric, covering and/or applying upholstery, lay-out and covering experience.  In addition, this position will be ...

The ideal applicant will have 3-5 years of corporate aircraft experience including jet and turbo prop experience.  Lear 31 and/or Pilatus PC-12 aircraft preferred. The position is full-time with a competitive wage/benefit package.

Duties and responsibilities include:

• Performs all airframe, power plant and propeller repairs and ...

The Avionics technician position requires a strong knowledge of aircraft airframe, avionics and electronics systems. This job includes varying amounts of parts replacement or repair, electrical troubleshooting and general mechanical applications.

• Perform avionics installation, maintenance and repair on systems and components. 
• Removal and installation ...

ESSENTIAL JOB FUNCTIONS

• Perform general mechanic functions on aircraft and related systems. This shall include, but not limited to items such as removal and installation of panels and components, repair work, and sheet metal repair or installation.
• Perform advance level troubleshooting and repairs.
• Examines, disassembles and inspects engines, ...
  
  IND18

Seeking an Aircraft Assembly Technician to assemble, disassemble, install, test and troubleshoot mechanical and electrical assemblies and subassemblies on aircraft systems.

Follow computer based and other specific processes and systems, including manufacturing planning, wiring diagrams, system schematics, process specifications, engineering sketches, and other forms ...

Currently seeking an Aircraft Mechanic in Minneapolis to work in the Component Maintenance team to perform and assist in the disassembly, cleaning, repair, assembly, and testing of aircraft components

Job Summary 

The Aircraft Support Mechanic (ASM) -  Avionics is part of the Component Maintenance team . 

• In ...

Currently seeking Entry Level Avionics Technicians in Savannah, GA 

• Assists in troubleshooting and repairing system discrepancies to ensure minimum schedule impact.
• Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality. 

Principal ...

IND18

Skill: A&P Mechanic

Duration: 3+ months (open ended)

Location: Augusta GA

Aircraft: Falcon Jet, Hawker, Lear Jet

Salary: please call Strom Aviation for compensation details (800) 743-8988

The A&P Mechanic is responsible for performing routine maintenance ...

The avionics technician performs maintenance on aircraft avionics components and electrical systems components, such as airborne navigation/communication systems, weather radar, autopilot, compass systems and accessories in accordance with MFG specifications and FAA guidelines. 

Description/Comment: 

To identify malfunctions, remove, repair and ...

• Performs a variety of operations to manufacture, assemble and/or refurbish aircraft parts and structures such as F-16 canopies, F-35 canopies, and C-130 sub-assembly components.
• Assemblies can require controlled tooling as well as build to print.
• Tasks include aligning parts on jigs using both templates and fixtures.
• Performs part-fitting operations such ...

Services, repairs, and overhauls F-22 aircraft electrical systems to ensure airworthiness. Repairs, replaces, and rebuilds aircraft electrical systems. Incorporate engineering changes. Replaces and repairs worn or damaged components. Adjusts, repairs, and replaces electrical wiring system and aircraft accessories.

Utilize experience and skills to complete all phases of aircraft painting while maintaining a safe work environment.

Essential Job Functions:
• Work as team member to provide quality products and services for our customers.
• Prepare and mix proper painting materials.
• Mask and prepare aircraft for primer application.

• Performs a variety of operations to manufacture, assemble and/or refurbish aircraft parts and structures such as F-16 canopies, F-35 canopies, and C-130 sub-assembly components.
• Assemblies can require controlled tooling as well as build to print.
• Tasks include aligning parts on jigs using both templates and fixtures.
• Performs part-fitting operations such ...

• P3 Engine and APU Operator experience as a P3 Flight Engineer and be capable ground operator qualification.
• Inspects, troubleshoots, repairs, overhauls and modifies aircraft systems and power plants in accordance with established written procedures, specifications, and standards.
• Candidate must be knowledgeable in aircraft systems operation and maintenance to include ...

Position Overview:

• The Maintenance Lead an essential member of an award-winning service delivery team who ensures each assigned aircraft is meticulously managed including maintenance, record keeping, detailing, and is safe for flight. The Maintenance Lead must be detail oriented and have excellent communications skills.
• This job includes varying ...

Position Overview:

The Avionics Installation technician position requires a strong knowledge of aircraft airframe, avionics and electronics systems. This job includes varying amounts of parts replacement or repair, electrical troubleshooting and general mechanical applications

Key Roles and Responsibilities:

• Assist ...

Skill: Sheetmetal Technician Sr

Duration: 3+ months (open ended)

Location: Cahokia IL

Aircraft: Gulfstream

Salary: please call Strom Aviation for compensation details (800) 743-8988 

Description:The Sheetmetal Technician Senior works under ...

Candidates will be performing A&P duties on general aviation aircraft. Single engine Cessna experience is desired. 

Summary of Accountabilities:

Maintains, repairs, and overhauls aircraft to ensure the aircraft is in safe working condition.

Primary Duties and Responsibilities:

1.    Perform all repairs, ...

Include the following.  Other duties may be assigned to meet business needs. 

• The daily operation of assigned repair station duties in compliance with all applicable Code of Federal Regulations, Repair Station Procedures, customer requirements, and manufacturer’s recommendations.
• Maintaining FAA liaison for the assigned repair station.
• Accomplishing ...

working on assembly's, large components such as landing gear.

Performs assembly, disassembly and repairs required in the completion of airframe overhaul, repair or modifications, including but not limited to removal, replacement and repair of parts of engines, airframes and systems. Responsible for helping licensed mechanics set up and tear down the equipment, tools and ...

IND18

Skill: Cabinetmaker II

Duration: 3+ months (open ended)

Location: Cahokia IL

Aircraft: Gulfstream

Salary: please call Strom Aviation for compensation details (800) 743-8988

Description:

Under general supervision, fabricates aircraft furniture ...

Skill: Cabinetmaker II

Duration: 3+ months (open ended)

Location: Cahokia IL

Aircraft: Gulfstream

Salary: please call Strom Aviation for compensation details (800) 743-8988

Description:

Under general supervision, fabricates aircraft furniture ...

• Technician will be responsible for installing, modifying, and troubleshooting helicopter electrical systems and wiring. Candidate must be able to read and interpret engineer drawings, schematics, and job cards and have the ability to check own work to verify defect fee installation prior to final inspection
• Assemble, modify, install wire bundles and other avionics equipment
• Clearly ...

• Structures Technicians with 3+ years experience on helicopters for long term assignments. 
• Our client is seeking an Aviation Structures Technicians with 5+ years experience on helicopters for long term assignments.  
• Set up and operate fabricating machines such as shears, breaks, presses, forming rolls and routers, to cut, bend, block and form or straighten ...

• Perform inspections, repairs, services, and overhaul to helicopter dynamic components.
• Keep tool control and maintain work area clean all the time.
• Work in the SAP computer system regarding sign offs and logging time on jobs.
• Perform other duties and fulfill other responsibilities as assigned on the shop as well as supporting the hangar floor when required.
• Work ...

• Able to read and interpret schematics, assembly drawings, process specifications, technical manuals, written instructions, test procedures, etc.
• Able to setup and use pneumatic tools such as screw guns, etc.
• Able to setup and use a torque wrench
• Able to use common hand tools such as: wrenches, safety wire pliers, etc
• Able to remove, replace and ...

• A&P Mechanics with commercial aircraft experience. Perform such typical maintenance operations such as the removal and replacement of aircraft and powerplant components that require bolting, torquing, adjusting rigging and safety wiring, including powerplant and flight control removal and reinstallation
• Repair, modify, replace or overhaul aircraft and aircraft systems to ...

• Performs the functional testing required to isolate a customer complaint in a particular avionics system and repairing that aircraft system in accordance with FAA procedures.
• Strong troubleshooting skills and modification experience preferred but will also take installers.  
• Based on in-flight analysis and/or evaluation of information received from the customer, ...

Seeking Aircraft Painters in Savannah, GA 

The Aircraft Painter II works under minimum supervision to safely prepare, paint and detail aircraft according to schedule using company quality standards and operating procedures.

Essential Functions:

• Safely perform aircraft preparation, painting, and detailing of aircraft ...

Skill: Sheetmetal Technician II

Duration: 3+ months (open ended)

Location: Cahokia IL

Aircraft: Gulfstream

Salary:

please call Strom Aviation for compensation details

Description:The Sheetmetal Technician II works under general supervision ...

Currently seeking Sheetmetal Technicians with 2 years of sheetmetal and/or fabrication experience on aircraft in Savannah, GA

The Sheetmetal Technician I works independently or with moderate supervision to fabricate and install complex interior subassemblies in aircraft.

Training:

S-M Mechanic will get 3 weeks hands on training before ...

Currently seeking Senior Sheetmetal Technicians in Savannah, GA

The Sheetmetal Technician Senior works under minimal supervision to safely lay-out, fabricate and install parts equipment and fabricated items on aircraft following established operating procedures. All work performed should be in accordance with company design specifications, quality standards and completed ...

Sheet metal mechanics will be performing routine and non routine repairs on commercial aircraft. All aircraft repairs performed per FAA and manufacturer requirments . Client works on both Airbus and Boeing Aircraft. Client has heated hangars and long term work.  Immediate feedback on resumes with quick starts available.  Candidates must have at least 3 years of Aircraft Structures ...

Strom Aviation is looking for Commercial A&P mechanics to perform work in Indianapolis. Long term contract, OT available. This position is  also offering an employment opportunity to those Aircraft Mechanics with military experience and an A&P license looking for an opportunity to get some experience on civilian heavy commercial aircraft. Please note, this position does require you ...

Our Client is a certified MRO facility, operating under a Part 145 certificate. Housed in a modern 50,000+ square foot facility, we provide state-of-the-art maintenance for your aircraft.

As a division of a regional airline, our client boasts an excellent maintenance history.

Maintaining planes since inception in 1977. Forest Service ...

IND18

Currently seeking Structure Assembly Mechanics in Tulsa, OK

S-M Mechanic will get 3 weeks hands on training before working on the aircraft including experience with:

• Hiloks
• Sealant
• Drilling Closer Tolerance Holes

In a team oriented work environment, under minimal supervision, performs a variety of structural ...

Assemble, modify and install aircraft assemblies, subassemblies, components, systems and Airframe structures on aircraft systems. Identify nonconforming parts, conditions and processes. Major Task and Responsibilities Assemble composite assemblies using bonding fixture and drill fixture tooling. Familiarity with rivet installation, rivet removal, bonding, composite trim, sealant process and associated ...

Performs assembly, disassembly and repairs required in the completion of airframe overhaul, repair or modifications, including but not limited to removal, replacement and repair of parts of engines, airframes and systems. Responsible for helping licensed mechanics set up and tear down the equipment, tools and supplies used during the repair of the aircraft. Required to tow and move aircraft during ...

Seeking Structures Technicians in Hayden, ID

• Performing maintenance and inspection in MRO environment on Regional Turbo-Prop aircraft, mostly ATR42/72 and Saab340
• Repair body or structure of aircraft according to specifications
• Reinstall repaired or replacement parts for subsequent riveting or welding, using clamps and wrenches
• Read work ...
  
  IND18

Currently seeking Aircraft Mechanics in Brunswick, GA to work on Corporate Business Jets.

Essential Functions

• Under minimal supervision, performs inspections, maintenance, and repairs of moderate to advanced complexity on aircraft systems and structures.
• Communicate as required to receive and understand work assignments.
• Perform ...

Currently seeking Composite Mechanics in Tulsa, OK

Under minimal supervision, perform one or more of the following composite part manufacturing functions: complex lay-up, cutting, bagging, autoclave, trimming, and/or complex repairs, in a production environment. Provide specialized technical assistance and interact with team members to resolve manufacturing issues. 

Seeking Structures Technician in Greybull, Wyoming.

The Structures Technician will perform structure maintenance, repair and/or modification on customer aircraft in accordance with applicable technical data, customer maintenance program requirements, within estimated or budgeted hours, and within FAA and customer standards of quality under the direction and supervision of his/her Crew ...

S-M Mechanic will get 3 weeks hands on training before working on the aircraft including experience with:

• Hiloks
• Sealant
• Drilling Closer Tolerance Holes

The Sheetmetal Technician II works under general supervision to safely layout, fabricate and install parts, equipment and fabricated items on aircraft following established operating procedures. ...

Job Overview and Responsibilities

The Airframe and Powerplant Technician is responsible for service and maintenance of the aircraft systems, power plant, airframe and components. This includes performing inspections, preventive maintenance, troubleshooting, part replacement and repairs, as well as other routine maintenance such as fluid servicing and lubrication.

Seeking an A&P Technician in Boise, ID

Inspect, test, repair, maintain, and service aircraft using test equipment and hand tools, as needed,
to return aircraft to service per FAA and manufacturers specifications.
 

Job Duties:

• Performs routine maintenance and inspections on corporate aircraft
• Ensures ...

Currently seeking Composite Technicians in Savannah, GA with one year of Composite experience

Under moderate supervision, perform one or more of the following composite part manufacturing functions: lay-up, cutting, bagging, autoclave, trimming, and/or repair, in a production environment.
 

Essential Functions:

• Manufacture ...

• Repair, replace, and rebuild aircraft structures
• Utilize OEM and Engineering drawings to modify aircraft structure or interiors
• Complete specialized tasks, such as flap ...
  
  IND18

• Performs all airframe, power-plant, propellor repairs and modifications required to meet company, manufacturer, and FAA requirements.
• Performs routine inspections and troubleshooting.
• Operates all power tools and equipment necessary to accomplish job assignment.
• Accurately completes all required maintenance records.
• Accurately records time worked ...

A&P Mechanics to perform heavy C&D checks.

• Researches technical data and performs disassembly, repair, cleaning, adjustment, assembly, testing and calibration of aircraft components and company special tools and ground equipment in accordance with applicable maintenance manual, FAA regulations and Ascent Aviation Services policies and procedures.
• Repairs, replaces ...

• Researches technical data and performs disassembly, repair, cleaning, adjustment, assembly, testing and calibration of aircraft components and company special tools and ground equipment in accordance with applicable maintenance manual and FAA regulations.
• Repairs, replaces and rebuilds aircraft structures such as wings and fuselage, and functional components including ...
  
  IND18

Looking for 2 good A&P technicians to work an assignmment at Chicago Executive Airport.  Ideal candidates will have 5+ years experience on corporate aircraft.

We are really looking for someone with avionics and troubleshooting experience.

Description

Maintain corporate jet aircraft for a FAA 145 repair station

Duties ...