Strom Aviation is currently seeking helicopter mechanics with either Bell 212, 407, 412, 429, AS365 or Sikorsky S-76 experience. Must have 5 Yrs of A&P experience. Need to be able to start ASAP
POSITION SUMMARY:
The Helicopter Technician reports to the Maintenance Manager of Rotor Craft and is responsible ...
Strom Aviation has a need for 4 A&P Mechanics for a contract position in Middletown, DE.
Seeking A&P mechanics in Macon, GA
Seeking A/P Mechanics in Nashville, TN -- Work will be performed on Regional Aircraft.
Job Duties; Examines, repairs, assembles, and tests aircraft accessories, such as engines, power brake units, auxiliary electric motors, spark igniters, valves, pumps, fuselage, wings, and oil and fuel tanks, using hand tools and testing devices, and following shop orders and manufacturer's ...
Seeking A&P mechanics in Middletown, DE to work on CH-47 helicopters.
Inspect, test, repair, maintain, and service aircraft. Read and interpret aircraft maintenance manuals and specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Examine and inspect engine or other components for cracks, breaks, or leaks.
Disassemble ...
Skill: A&P Mechanic
Duration: 3+ months (open ended)
Location: Oklahoma City OK
Aircraft: CRJ, ERJ
Salary: please call Strom Aviation for compensation details (800) 743-8988
Description:
Must be able to perform flight control and ...
Seeking an overhaul technician to perform the following tasks;
Independently perform a variety of aircraft modifications and maintenance functions such as removal and installations of airframes, landing gear, engine components, electrical components, and control systems to assure conformance to procedures, performances and test specifications.
Principal Duties and Responsibilities:
Able to read and interpret schematics, assembly drawings, process specifications, technical manuals, written instructions, test procedures, etc.
Able to setup and use pneumatic tools such as screw guns, etc.
Able to setup and use a torque wrench
Able to use common hand tools such as: wrenches, safety wire pliers, etc
Able to remove, replace and check out aircraft components ...
Currently seeking A&P Mechanics in Eden Prairie, MN with Corporate Business Jet experience
Type of Aircraft: Falcon 10, Falcon 20, Falcon 50, Hawker 1000
Longevity: Long Term contract with possibility of direct employment.
Summary
The primary duties of this position are ...
A&P Mechanics with commercial aircraft experience. Perform such typical maintenance operations such as the removal and replacement of aircraft and powerplant components that require bolting, torquing, adjusting rigging and safety wiring, including powerplant and flight control removal and reinstallation
Repair, modify, replace or overhaul aircraft and aircraft systems to ensure airworthiness.
Candidate will be performing checks, repairs both routine and non routine on heavy commercial aircraft.
• Perform all work assigned in accordance with approved FAA data.
• Ensure complete and proper documentation of work performed.
• Ensure that all maintenance performed is in an air worthy condition.
• Maintains the premises and the repair station ...
Seeking licensed A&P mechanics in Greensboro, NC
Must be able to perform intermediate/heavy maintenance tasks with minimal or no supervision on Boeing 737, 777 aircraft. Must be able to perform flight control and engine throttle rigging. Must be able to use the FAA approved data proficiently (ie IPC, M/M, OHM, SRM). Must be able to perform excellent quality work. Document maintenance performed on required forms. Must ...
Our client provides its employees with a stable, growth-oriented work environment that offers opportunities for professional, personal and financial growth. While recognizing its employees as the most valuable asset. Management is dedicated to the continued building of the professional team that has allowed our client to become a recognized industry ...
Location Dallas Fort Worth
Job Requirements
To include but not limited to, all functions and responsibilities of preceding Technician level.
Looking for Commercial A&P mechanics to perform work in Indianapolis. Work will include routine as well as non routine maintenance. All work will be performed per FAA and manufacturer requirements. This position is offering an employment opportunity to those Aircraft Mechanics with military experience and an A&P license looking for an opportunity to get some experience on civilian ...
Seeking A&P Mechanics inPinellas Park, FL
Able to perform heavy maintenance on Lear 31, 35, 45 aircraft.
Able to perform all airframe and power plant and modifications required to meet company and FAA requirements.
Able to perform routine inspections and troubleshooting.
Operate all power tools and equipment necessary to accomplish job assignment. Accurately complete all required maintenance records. Perform ...
POSITION SUMMARY: Perform a basic to advanced level skilled work to identify, remove, and install aircraft components and to perform servicing of engines and aircraft accessories to ensure airworthiness according to customer specifications and FAA standards. Reads and complies with instructions and safety information as necessary for proper and safe ...
POSITION SUMMARY: Perform a basic to advanced level skilled work to identify, remove, and install aircraft components and to perform servicing of engines and aircraft accessories to ensure airworthiness according to customer specifications and FAA standards. Reads and complies with instructions and safety information as necessary for proper and safe ...
POSITION SUMMARY: Perform a basic to advanced level skilled work to identify, remove, and install aircraft components and to perform servicing of engines and aircraft accessories to ensure airworthiness according to customer specifications and FAA standards. Reads and complies with instructions and safety information as necessary for proper and safe completion of assigned ...
Our Client is a certified MRO facility, operating under a Part 145 certificate. Housed in a modern 50,000+ square foot facility, we provide state-of-the-art maintenance for your aircraft.
As a division of a regional airline, our client boasts an excellent maintenance history.
Maintaining planes since inception in 1977. Forest Service ...
A&P Mechanics . Perform such typical maintenance operations such as the removal and replacement of aircraft and powerplant components that require bolting, torquing, adjusting rigging and safety wiring, including powerplant and flight control removal and reinstallation
Repair, modify, replace or overhaul aircraft and aircraft systems to ensure airworthiness.
Perform work within ...
Seeking Aircraft Mechanics to work on Commercial Aircraft in Minneapolis, MN
Performs disassembly, cleaning, inspection, and assembly for the repair and overhaul of the Turbomeca family of engines (Fuel Control Unites and/or Hydro-mechanical Units). and/or Engine accessories.
Skill: A&P Mechanic (Completions)
Duration: 3+ months (open ended)
Location: Little Rock AR
Aircraft: Falcon 7X
Salary:
Currently seeking Final Line Mechanics in Savannah, GA (A&P Entry Level Position)
***Good fit for a Military Mechanic whom performs A&P duties but does not possess an A&P License***
Position Purpose:
In a team oriented work environment, install parts and components, lines, cables, etc. in area ...
Performs assembly, disassembly and repairs required in the completion of airframe overhaul, repair or modifications, including but not limited to removal, replacement and repair of parts of engines, airframes and systems. Responsible for helping licensed mechanics set up and tear down the equipment, tools and supplies used during the repair of the aircraft. Required to tow and move aircraft during ...
Currently seeking Aircraft Mechanics in Savannah, GA
Under minimal supervision, performs inspections, maintenance, and repairs of moderate to advanced complexity on aircraft systems and structures.
Essential Functions:
Currently seeking Aircraft Mechanics in Brunswick, GA
Essential Functions
Performs disassembly, cleaning, inspection, and assembly for the repair and overhaul of the Turbomeca family of engines (Fuel Control Unites and/or Hydro-mechanical Units). and/or Engine accessories.
A&P Mechanics to perform aircraft maintenance. Looking for the following: Smaller aircraft experience (CORP, GA) Not a lot of commercial and/or large military experience Not factory work (not assembly, manufacturing)
Essential Functions Statement:
Skill: Aircraft Tech I
Duration: 3+ months (open ended)
Location: Cahokia IL
Aircraft: Gulfstream
Salary: please call Strom Aviation for compensation details (800) 743-8988
Description:
The Aircraft Technician I, under close supervision, ...
Location: Springfiled, MO
Compensation: Please call a Strom Aviation Representative for details 800.743.8988
Duration: Long term work (open ended)
Strom Aviation is currently seeking A&P Mechanics to perform maintenance on EMB120, Saab 340, Saab 2000 and EMB 145.
Client performs variety of maintenance checks.
1st Shift position ...
We are currently seeking A&P mechanics in Duluth, MN to perform the following duties:
Would like for them to have landing gear remove and replace, engine remove and replace, flight control rigging and Pneumatic system operation, trouble shooting skills, and advanced aircraft systems trouble shooting and operation skills.
At least 5 years experience on DHC-7, DHC-8 , ATR-42 or ATR 72 type aircraft.
The tools that will be required ...
Skill: A&P Mechanic/Technician
Duration: 3+ months (potential temp to perm)
Location: East Alton IL
Aircraft: Corporate (Lear Jets, Hawkers, Falcons, Challengers, etc.)
Salary: please call for compensation details (800) 743-8988
Description:
Candidates ...
SUMMARY: Service, repair and overhaul aircraft to ensure airworthiness. Works under minimal supervision.
• Remove and Install flight control surfaces and components
• Repair, replace, and rebuild aircraft structures
• Utilize OEM and Engineering drawings to modify structures and flight controls
• ...
P3 Engine and APU Operator experience as a P3 Flight Engineer and be capable ground operator qualification.
Inspects, troubleshoots, repairs, overhauls and modifies aircraft systems and power plants in accordance with established written procedures, specifications, and standards. Candidate must be knowledgeable in aircraft systems operation and maintenance to include landing gear, power ...
Skill: A&P Mechanic
Duration: 3+ months (open ended)
Location: Houston TX
Aircraft: Falcon Jet, Hawker, Lear Jet, Challenger
Salary: please call Strom Aviation for compensation details (800) 743-8988
Description:
The A&P Mechanic ...
Job Overview and Responsibilities
The Airframe and Powerplant Technician is responsible for service and maintenance of the aircraft systems, power plant, airframe and components. This includes performing inspections, preventive maintenance, troubleshooting, part replacement and repairs, as well as other routine maintenance such as fluid servicing and lubrication.
Position Purpose:
Independently perform a variety of aircraft modifications and maintenance functions such as removal and installations of airframes, landing gear, engine components, electrical components, and control systems to assure conformance to procedures, performances and test specifications.
Principal Duties and Responsibilities:
Job Responsibilities:
Immediate need as we are looking for qualified A&P mechanics to work in Peru, IN ASAP. Aircraft currently being worked are from Jet Blue, UPS, Air Canada and American Airlines. Gen Fam’s (not required but preferred) we are seeking: A319, 320, or 320’s. Also B757, A300, MD-11, or CRJ. Seeking candidates to perform A&P duties on narrow body and regional jet aircraft ...
We are currently seeking A&P mechanics in Duluth, MN to perform the following tasks;
An Aviation Maintenance Technician performs scheduled and unscheduled maintenance on all types of corporate and general aviation aircraft including but not limited to Cessna, Pilatus, Learjet and Cirrus aircraft.
Essential Job Functions:
Position Purpose:
Under minimal supervision, performs inspections, maintenance, and repairs of moderate to advanced complexity on aircraft systems and structures.
Principal Duties and Responsibilities:
Essential Functions:
Performs all airframe, power-plant, propeller repairs and modifications required to meet company, manufacturer, and FAA requirements.
• Performs routine inspections and troubleshooting.
• Operates all power tools and equipment necessary to accomplish job assignment.
• Accurately completes all required maintenance records.
• Accurately ...
Seeking licensed A&P mechanics in Wilmington, OH
Candidates will be working on 727, 757, 767 and other commercial type aircraft that client performs maintenance on.
What you will do: This position will perform troubleshooting, inspections, routine and non-routine maintenance on customer aircraft in accordance with applicable ...
Currently seeking Final Line Mechanics in Savannah, GA
***Good fit for a Military Mechanic whom performs A&P duties but does not possess an A&P License***
Position Purpose:
In a team oriented work environment, install parts and components, lines, cables, etc. in area assigned using required ...
A&P Mechanics to perform heavy C&D checks.
Currently seeking A&P mechanics to work on regional aircraft in Bangor, ME
Ideal candidates should have 5-10 years of experience working with one or more of the following aircraft types:
Other position requirements ...
Looking for 2 good A&P technicians to work an assignmment at Chicago Executive Airport. Ideal candidates will have 5+ years experience on corporate aircraft.
We are really looking for someone with avionics and troubleshooting experience.
Description
Maintain corporate jet aircraft for a FAA 145 repair station
Duties ...