Job Information - Job #2130031629 Filled - Use Search for More Options (ID# 2130031629)

Oh no! It looks that job has already been filled! Please review our other listings for more opportunities.


Featured Job

Avionics posted 1/26/2021 Ref No. 2130031681

Equipment: Regional Airlines
Location: Macon, GA

Performs avionics and electrical systems maintenance according to FCC, FAA and Company Policies and Regulations. Troubleshoots, tests, repairs and installs avionics components such as aircraft communication, navigation, radar and electronic instrument systems. Operates and maintains test equipment and trade associated tools.

JOB RESPONSIBILITIES

  • Performs routine or special maintenance inspections to prevent failure of aircraft electrical and avionic systems and components; performs complete operational and functional checks on navigation, communication and flight control systems, including instrumentation and pilot static installations, etc.  Fabricates wiring harnesses, installs/modifies avionic and electrical systems.
  • Determines when a component should be repaired or replaced; decides upon necessary repair scheme and quantity and type of parts needed to accomplish proper repair; secures same from Stores or departmental supplies.
  • Follows approved maintenance procedures for subject component or system, consulting internal procedures that have been FAA approved, original equipment manufacturer's (OEM's) technical data, and work package instructions.
  • Inspects completed work before sign off to identify any needed rework and performs rework; ensures that repaired components meet prescribed standards and tolerances.
  • Performs serviceability tests on repaired components/systems using test equipment specified by the original equipment manufacturer.
  • Completes work package documentation by signing/stamping off after finishing all designated operations.
  • Performs installation of digital avionic equipment.
  • Interprets avionic/electrical wiring diagrams, wire identification, harness fabrication, wiring and cable integrity, coax cables and fittings and connector assemblies.
  • Adjusts, repairs, or replaces malfunctioning components or assemblies, using hand tools and soldering iron.
  • Installs electrical and electronic components, assemblies, and systems in aircraft, using hand tools, power tools, and soldering iron.
  • Interprets flight test data to diagnose malfunctions and systemic performance problems.
  • Sets up and operates ground support and test equipment to perform functional flight test of electrical and electronic systems.
  • Tests components or assemblies, using circuit tester, oscilloscope, and voltmeter.
  • Trouble shoots, repairs, reworks, and modifies worn or defective assemblies, components or systems.

 

 

Featured Job

A&P Mechanic posted 1/25/2021 Ref No. 2130031680

Equipment: Regional Airlines
Location: Macon, GA

Seeking A&P mechanics in Macon, GA

  • Performs routine inspections or special maintenance to prevent failures of aircraft mechanical systems and components; performs complete operations checks on hydraulic systems, pneumatic systems, plumbing, precision assemblies, rigging and controls, etc.
  • Determines when a component should be repaired or replaced; decides upon necessary repair scheme, quantity and type of parts needed to accomplish proper repair; secures necessary parts from Stores or departmental supplies.
  • Repairs, reworks, and modifies worn or defective assemblies, making alterations or changes to units when necessary.
  • Follows approved maintenance procedures for subject component or system, consulting internal procedures that have been FAA approved, original equipment manufacturer's (OEM's) technical data, and work package instructions.
  • Consults the Maintenance Lead if technical assistance is needed during the repair process.
  • Inspects completed work before sign off to identify any needed rework; performs rework; ensures that repaired components meet prescribed standards and tolerances.
  • Performs serviceability tests on repaired components/systems using test equipment specified by the original equipment manufacturer.
  • Completes work package documentation by signing/stamping after finishing all designated operations.
  • Submits completed/in-progress work to Maintenance Lead for review; submits to Quality Assurance for final/in-progress inspection and re-certification of airworthiness.
  • Provides supervisor with performance statistics and other operational data, as requested.
  • Properly accounts for time and materials used in all inspection and maintenance activities.
  • Comply with repair station procedures (RSM /QCM) and company policies (SOP) when performing aircraft or component maintenance.

Featured Job

Fuel Cell Technician III posted 1/19/2021 Ref No. 2130031657

Equipment: Heavy
Location: Louisiana, LA

  • Perform removal, installation, and inspection functions of fuel cells and assembly, and installation of components such as fuel lines, hardware, and fittings on various aircraft.
  • Analyze various aircraft sealing, structural, and assembly drawings, to detect seal level deficiencies.
  • Diagnose results of leak test to detect drawing, specification, structural and assembly sealing errors.
  • Recommend corrective action necessary to correct deficiencies.
  • Perform disassembly and teardown operations of aircraft fuel systems and related components.
  • Remove fuel cells and components from aircraft, following specific procedures and techniques.
  • Prepare cavity for installation of fuel cells and components.
  • Install fuel cells and components, following specific procedure techniques.
  • Use appropriate pressure test equipment, and make repairs as required.

Featured Job

Finisher posted 12/28/2020 Ref No. 2130031591

Equipment: Corporate
Location: St. Louis, MO

  • Establish the highest quality of the work performed on aircraft cabinets, and components undergoing work and specialized services meets Company standards and goals that in turn meets or improves budgeted hours/schedules.
  • A wide and comprehensive familiarity with, and understanding of, both general and specific aspects of the job and their practical application to complex problems and situations ordinarily encountered.
  • Use of strong mathematical knowledge to accurately measure complete project ensuring quality and precision.
  • Collaborate with department Crew Lead(s) to troubleshoot application, prepped surface, and finish discrepancies. 
  • Following and working from approved engineering drawings as well as other written instructions and design specifications.
  • Ability to execute any step within the finishing process to complete the monument.
  • Utilize the methods set forth by the company’s Repair Station and Quality Control Manual(s).

Featured Job

Structures Technician posted 10/28/2020 Ref No. 2130031028

Equipment: Heavy
Location: Bridgeport, WV

  • Troubleshoot, inspect and perform maintenance on customer aircraft sheet metal components, composites and hydraulics.
  • Perform and document all work performed per appropriate manuals and regulations as required.
  • Adhere to General Work Requirements (Factory, Shop and / or Hanger positions)
  • Comply with environmental health / safety policies / procedures, participate in 5-S activities and perform work in a safe and timely manner
  • Remove / install aircraft components as required
  • Fabricate and or modify structural modifications on aircraft part
  • Perform minor structural repairs on composite components either attached or detached
  • Assist in conducting hidden damage inspection of aircraft structures
  • Assist with complex structural repairs either on or off aircraft
  • Operate ground support equipment as required
  • Assist with aircraft component repair
  • Perform mechanical / electrical removals and installations as required
  • May assist with maintenance at off-site locations
  • Assist in wing removal as required
  • Assist maintenance as required
  • Inspect confined areas of airframe
  • Assist in designing, modifying and welding metal fixtures as required
  • Assist in providing time estimates as required
  • Fabricate sheet and/or composite components

Featured Job

Structures Technician posted 6/26/2020 Ref No. 2130031004

Equipment: Heavy
Location: Tucson, AZ

  • Troubleshoot, inspect and perform maintenance on customer aircraft sheet metal components, composites and hydraulics. Perform and document all work performed per appropriate manuals and regulations as required.
  • Adhere to General Work Requirements (Factory, Shop and / or Hanger positions)
  • Comply with environmental health / safety policies / procedures, participate in 5-S activities and perform work in a safe and timely manner
  • Remove / install aircraft components as required
  • Fabricate and or modify structural modifications on aircraft part
  • Perform minor structural repairs on composite components either attached or detached
  • Assist in conducting hidden damage inspection of aircraft structures
  • Assist with complex structural repairs either on or off aircraft
  • Operate ground support equipment as required
  • Assist with aircraft component repair
  • Perform mechanical / electrical removals and installations as required
  • May assist with maintenance at off-site locations
  • Assist in wing removal as required
  • Assist maintenance as required
  •  Inspect confined areas of airframe
  • Assist in designing, modifying and welding metal fixtures as required
  •  Assist in providing time estimates as required
  • Fabricate sheet and/or composite components


 




Search...

Clear Search Criteria

Enter job alerts contest now!

Jobs for...