Job Information - Job #2130027443 Filled - Use Search for More Options (ID# 2130027443)

Oh no! It looks that job has already been filled! Please review our other listings for more opportunities.


Featured Job

Sheetmetal - CH-47 posted 10/11/2018 Ref No. 2130027665

Equipment: Military Helicoptor
Location: Middletown, DE

Strom Aviation is currently seeking Sheetmetal mechanics in Middletown, DE.  Candidates will be on the CH-47 side and will be doing repairs and modifications.  

Featured Job

A&P Mechanic posted 10/8/2018 Ref No. 2130027764

Equipment: Helicoptor
Location: Middletown, DE

Strom Aviation is currently seeking helicopter mechanics with either Bell 212, 407, 412, 429, AS365 or Sikorsky S-76 experience.  Must have 5 Yrs of A&P experience.  Need to be able to start ASAP 

***Possible Temp to Perm for the right candidate otherwise duration is through the end of the year.*** 

POSITION SUMMARY:
The Helicopter Technician reports to the Maintenance Manager of Rotor Craft and is responsible for the installation, repair, modification and routine maintenance on aircraft as required; operates in compliance with company safety practices and performs other duties as assigned.

ESSENTIAL DUTIES AND RESPONSIBILITIES

  1. Inspect, test, repair, maintain, and service aircraft.
  2. Read and interpret aircraft maintenance manuals and specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components.
  3. Modify aircraft structures, space vehicles, systems, or components, following drawings, engineering orders and technical publications.
  4. Examine and inspect engine or other components for cracks, breaks, or leaks.
  5. Disassemble and inspect parts for wear, warping, or other defects.
  6. Assemble and install electrical, plumbing, mechanical, hydraulic, and structural components and accessories, using hand tools and power tools.
  7. Adjust, align, and calibrate aircraft systems, using hand tools, gauges, and test equipment.
  8. Test engine and system operations, using testing equipment, and listens to engine sounds to detect and diagnose malfunctions.
  9. Service and maintain aircraft systems by performing tasks, such as flushing crankcase, cleaning screens, greasing moving parts, and checking brakes.
  10. Perform maintenance IAW FAA approved technical data.
  11. Research FAA technical data to locate applicable data relevant to assigned tasks.

Qualifications: 
To perform this job successfully an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. 

Featured Job

A&P Mechanic posted 10/8/2018 Ref No. 2130027497

Equipment: Commuter
Location: Middletown, DE

Strom Aviation has a need for 2 A&P Mechanics for a contract position in Middletown, DE.  Candidate must have at least 5+ Years of experience and some experience with Cessna's and Beechcraft's.   

Featured Job

Sheetmetal Mechanic posted 10/5/2018 Ref No. 2130027707

Equipment: Regional Airlines
Location: Nashville, TN

Strom Aviatoin is currently seeking Sheetmetal / Structural mechanics for a client in Nashville, TN.  Candidates will be performing maintenance on Embraer regional aircraft. This job requires at least 3 years of Sheet Metal repair experience

Featured Job

A&P Mechanic posted 8/21/2018 Ref No. 2130027769

Equipment: Commuter
Location: Springfield, MO

Strom Aviation is currently seeking A&P Mechanics to perform maintenance on EMB120, Saab 340, Saab 2000 and EMB 145.  Client performs variety of maintenance checks.  Long Term Work, 1st Shift, Monday - Friday

Featured Job

A&P Mechanic posted 8/20/2018 Ref No. 2130027374

Equipment: Heavy
Location: Indianapolis, IN

Strom Aviation is looking for Commercial A&P mechanics to perform work in Indianapolis. Long term contract, OT available. This position is  also offering an employment opportunity to those Aircraft Mechanics with military experience and an A&P license looking for an opportunity to get some experience on civilian heavy commercial aircraft. Please note, this position does require you to provide your own tools. Climate controlled, state of the art facility in the Midwest offering stability and a management team that appreciates and looks for professional mechanics is what they are offering. Very attractive travel and bonus structure is also available.  Please contact a Recruiter now for more details.

Featured Job

Sheet Metal Mechanic Travel Pay Included posted 8/20/2018 Ref No. 2130027542

Equipment: Heavy
Location: Indianapolis, IN

Strom Aviation is currently seeking Sheet metal / Structural Mechanics needed to work on commercial aircraft.  Candidates will be performing structural / sheetmetal repairs  and modifications to commercial aircraft. Contact a Recruiter for more details today.

Featured Job

Composite Repair posted 8/20/2018 Ref No. 2130027676

Equipment: Heavy
Location: Indianapolis, IN

SUMMARY: Performs composite repairs related to molds, wet and pre-preg layup, repair of existing structures pertaining to Honeycomb. Carbon Kevlar and Fiberglass construction.

ESSENTIAL DUTIES AND RESPONSIBILITIES

Ability to perform hot and or cold bond repairs per the Aircraft SRM. EAS & other approved documentation with direct supervision. Identify damaged components by visual or tapping method with direct supervision. Ability to learn proper repair technique and materials required. Ability to learn proper techniques to sand, trim. Prime and fit repairs to parts. Ability to follow instructions for repair sequences, and completing necessary forms. Ability to understand and observe all safety procedures and maintain a clean work environment Cleans and removes any foreign objects generated during the course of effecting repairs. Complies with all safety procedures at all times. Without exception. Document all work accomplished on a daily bases. Performs such other tasks as may be reasonably assigned by her his supervisor.

CORE COMPETENCIES Commitment to company values and ethics Dependability: personally responsible. Completes work in a timely manner. And performs tasks accurately Motivation: must maintain a positive attitude and strong work energy Communication: excellent interpersonal and oral and written communication skills Continuous learning; ability to learn new procedures and adapt to change Creativity: makes constructive suggestions and creates novel solutions to problems evaluates new technology as potential solutions to existing problems Independent: must have the ability to carry out and follow through on tasks with minimal supervision

QUALIFICATIONS

To perform this job successfully. An individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Ability to speak. Read and comprehend standard English. Have a general mechanical aptitude. Able to comprehend and follow instructions.

EDUCATION AND EXPERIENCE

High school diploma or general education degree (GED) required. FAA Airframe OR Airframe & Powerplant license required.

PHYSICAL DEMANDS WORK ENVIRONMENT

The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Exposed to high levels of noise, dust. Vibration and chemical fumes. Able to lift fifty (50) pounds without mechanical assistance. Able to bend. Twist, squat and lift. Able to access and work in all areas of the aircraft to be worked on. Including confined areas. Able to work a flexible schedule Able to climb on ladders and platforms and work at heights up to fifty feet from the ground. Able to work in extreme climatic conditions. The environmental characteristic for this position is a warehouse setting. Candidates should be able to adapt to a traditional warehouse environment.

 

Featured Job

Avionics Technician posted 8/20/2018 Ref No. 2130027371

Equipment: Heavy
Location: Indianapolis, IN

ESSENTIAL DUTIES AND RESPONSIBILITIES

Effectively perform R&E routine work associated with heavy aircraft A, B, C and D checks.

Detailed knowledge of aircraft avionics and electrical systems.

Understand engineering methodology for systems installations.

QUALIFICATIONS

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

EDUCATION and/or EXPERIENCE

GED/ HS Degree required.

Must have a minimum of  three years related experience 

A&P, FCC license or repairman certificate preferred.

Featured Job

Sheetmetal Mechanic BONUSES OFFERED posted 8/18/2018 Ref No. 2130027551

Equipment: Heavy
Location: Oklahoma City, OK

Sheetmetal Mechanics with modification or repair experience on commercial aircraft. Boeing 737, MD-80, or CRJ experience is a plus.

Featured Job

A&P - Commercial and Regional Program posted 8/18/2018 Ref No. 2130027553

Equipment: Heavy
Location: Oklahoma City, OK

A&P Mechanics to perform maintenance on commercial and regional aircraft. Boeing 737, MD-80 or CRJ experience is a plus.

Featured Job

A&P - U.S. Marshals Program posted 8/18/2018 Ref No. 2130027798

Equipment: Heavy
Location: Oklahoma City, OK

A&P Mechanics to perform maintenance on commercial and regional aircraft. Boeing 737, MD-80 or CRJ experience is a plus.

Featured Job

Cabinet Builder Technician III posted 8/3/2018 Ref No. 2130027268

Equipment: Corporate
Location: Indianapolis, IN

Job Summary:
These individuals should have the ability to fabricate high quality cabinetry, devan, ledges etc and other wood-surfaced subassemblies. Interpret material specs and engineering drawings to ensure finished product meets the design spec, with a high level of quality and detail. Request material needs timely to ensure a continuous work flow. Follows all department safety guidelines and ensure proper usage of tools and equipment. High School Diploma or GED. Trade schooling related to cabinetry or other relevant craftsmanship a plus. Thorough knowledge of the Cabinet Build process plus the demonstrated ability to lead and mentor others. 6 years Cabinetry experience, preferably in the corporate aviation completion environment. Ability to read, write, speak, and understand the English language. Ability to read and interpret blueprints and engineering documentation.

Featured Job

A/P Mechanic posted 7/23/2018 Ref No. 2130027709

Equipment: Regional Airlines
Location: Nashville, TN

3+ Yrs of Experience @ MRO Preferred
A/P Mechanics -- CRJ or Embraer OR commercial experience with a stable work history. Examines, repairs, assembles, and tests aircraft accessories, such as engines, power brake units, auxiliary electric motors, spark igniters, valves, pumps, fuselage, wings, and oil and fuel tanks, using hand tools and testing devices, and following shop orders and manufacturer's specifications.
Performs routine inspections or special maintenance to prevent failures of aircraft mechanical systems and components; performs complete operations checks on hydraulic systems, pneumatic systems, plumbing, precision assemblies, rigging and controls, etc.
Determines when a component should be repaired or replaced; decides upon necessary repair scheme, quantity and type of parts needed to accomplish proper repair; secures necessary parts from Stores or departmental supplies.
Repairs, reworks, and modifies worn or defective assemblies, making alterations or changes to units when necessary.
Follows approved maintenance procedures for subject component or system, consulting internal procedures that have been FAA approved, original equipment manufacturer's (OEM's) technical data, and work package instructions.
Consults the Maintenance Lead if technical assistance is needed during the repair process.
Inspects completed work before sign off to identify any needed rework; performs rework; ensures that repaired components meet prescribed standards and tolerances.
Performs serviceability tests on repaired components/systems using test equipment specified by the original equipment manufacturer.
Completes work package documentation by signing/stamping after finishing all designated operations.
Submits completed/in-progress work to Maintenance Lead for review; submits to Quality Assurance for final/in-progress inspection and re-certification of airworthiness.
Provides supervisor with performance statistics and other operational data, as requested.
Properly accounts for time and materials used in all inspection and maintenance activities.
Comply with repair station procedures (RSM /QCM) and company policies (SOP) when performing aircraft or component maintenance.

Education:
High School/ GED
A & P License required

Featured Job

Aircraft Mechanic posted 7/19/2018 Ref No. 2130027757

Equipment: Military Aircraft
Location: Greenville, SC

Candidate must have recent P3 Engine and APU Operator experience as a P3 Flight Engineer and be capable ground operator qualification.

Inspects, troubleshoots, repairs, overhauls and modifies aircraft systems and power plants in accordance with established written procedures, specifications, and standards. Candidate must be knowledgeable in aircraft systems operation and maintenance to include landing gear, power plants, flight controls, disassembly, reassembly, rigging and aircraft movement.


Must be able to read and speak English. Comprehend documents such as safety rules, operating maintenance instructions and procedure manuals.

Mission essential functions and other duties may be assigned as required

Featured Job

Avionics technician Premium posted 6/25/2018 Ref No. 2130027639

Equipment: Heavy
Location: Lake City, FL

Looking for Avionics Technicians for a position in Lake City, FL. OT available, long term contract. Looking for candidates who are not job hoppers. Please contact a Recruiter for more details.

Featured Job

Paint posted 2/26/2018 Ref No. 2130027793

Equipment: Heavy
Location: Longview, TX

Needing 10 qualified preppers who can wrap an aircraft and prepare it for paint.  

  • Assists in the preparation of the exterior surfaces of aircraft for application of primer and topcoat.
  • Use various masking materials to protect windows, external probes, antennas, and other required areas.
  • Sand and wash the aircraft surface .
  • Assist with and applies corrosion preventative materials to the aircraft.
  • Apply primer and sanding surfacer to aircraft.
  • Uses tools to sand primer and sanding surfacer in preparation for base coat.
  • Comply with all safety, 5S, and housekeeping policies.
  • Use personal protective equipment as required.
  • Use (PTP) to ensure aircraft interior is protected.

Featured Job

Fuel Cell Mechanic posted 2/13/2018 Ref No. 2130027698

Equipment: Military Aircraft
Location: Greenville, SC

• Perform removal, installation, and inspection functions of fuel cells and assembly, and installation of components such as fuel lines, hardware, and fittings on various aircraft.
• Analyze various aircraft sealing, structural, and assembly drawings, to detect seal level deficiencies.
• Diagnose results of leak test to detect drawing, specification, structural and assembly sealing errors. Recommend corrective action necessary to correct deficiencies.
• Perform disassembly and teardown operations of aircraft fuel systems and related components.

Featured Job

Cabinet Finisher Technician III posted 2/6/2018 Ref No. 2130027499

Equipment: Corporate
Location: Indianapolis, IN

FINISH TECHNICIAN III -

These individuals should have the ability to prepare high quality fabricated cabinetry, devan, ledges etc and other wood-surfaced subassemblies for the finish application.

Mixes paint and stains as needed to achieve a high quality finish application. Applies stains, dyes and paint to fmish fabricated cabinetry sub-assemblies. Utilize acceptable materials for the paint or dye process which is suitable to the design specification. Interpret material specs and engineering drawings to ensure finished product meets the design spec, with a high level of quality and detail. Request material needs timely to ensure a continuous work flow.
Follows all department safety guidelines and ensure proper usage of tools and personal protection equipment.
Trade schooling related to cabinetry or other relevant craftsmanship a plus.
6 years Cabinetry experience, preferably in the corporate aviation completion environment.
Ability to read, write, speak, and understand the English language.
Ability to read and interpret blueprints and engineering documentation.

Featured Job

Sheetmetal Mechanic posted 1/22/2018 Ref No. 2130027756

Equipment: Helicoptor
Location: Middletown, DE

All candidates must have at least 5 years exp and working with thin sheetmetal

Featured Job

A&P Technician posted 1/19/2018 Ref No. 2130025902

Equipment: Heavy
Location: Greensboro, NC

INCREASED PAY RATES!!  Need A&P technicians to work on Commercial aircraft in Greensboro, NC. 2+ years experience requiried. Long term contract. Please contact a recruiter to learn more today.

Featured Job

A&P Technician posted 7/14/2017 Ref No. 2130024912

Equipment: Avionics/Electrical Design
Location: Wheeling, IL

Looking for 2 good A&P technicians to work an assignmment at Chicago Executive Airport. Work will be on corporate aircraft. Ideal candidates will have 5+ years experience on corporate aircraft. OT available. Opportunity for direct employment exists. Competitive pay. Contact a recruiter to learn more today.




Search...

Clear Search Criteria

Jobs for...