Job Information - Job #2130026778 Filled - Use Search for More Options (ID# 2130026778)

Oh no! It looks that job has already been filled! Please review our other listings for more opportunities.


Featured Job

A&P Technician Premium posted 12/11/2018 Ref No. 2130027933

Equipment: Heavy
Location: Marana, AZ

  • Researches technical data and performs disassembly, repair, cleaning, adjustment, assembly, testing and calibration of aircraft components and company special tools and ground equipment in accordance with applicable maintenance manual and FAA regulations.
  • Repairs, replaces and rebuilds aircraft structures such as wings and fuselage, and functional components including rigging, surface controls, plumbing and hydraulic units.
  • Reads and interprets manufacturers and airlines maintenance manuals, service bulletins, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Upon removing units from an aircraft, engine, or other major component or subassembly, completes appropriate identification, routing tags and forms and makes appropriate entries into the Component Removal Log.
  • Inspects turbine blades to detect cracks or breaks.
  • Disassembles and inspects parts for wear, or other defects.
  • Repairs or replaces defective engine parts and reassembles and installs engine in aircraft.
  • Adjusts, repairs, or replaces electrical wiring system and aircraft accessories.
  • Performs miscellaneous duties to service aircraft including flushing crankcase, cleaning screens, greasing moving parts, and checking brakes.
  • Upon completion of work scope obtains the signature of a certified mechanic on work cards or forms.

Featured Job

A&P posted 12/7/2018 Ref No. 2130027911

Equipment: Regional Airlines
Location: Macon, GA

Seeking A&P mechanics in Macon, GA

  • Performs routine inspections or special maintenance to prevent failures of aircraft mechanical systems and components; performs complete operations checks on hydraulic systems, pneumatic systems, plumbing, precision assemblies, rigging and controls, etc.
  • Determines when a component should be repaired or replaced; decides upon necessary repair scheme, quantity and type of parts needed to accomplish proper repair; secures necessary parts from Stores or departmental supplies.
  • Repairs, reworks, and modifies worn or defective assemblies, making alterations or changes to units when necessary.
  • Follows approved maintenance procedures for subject component or system, consulting internal procedures that have been FAA approved, original equipment manufacturer's (OEM's) technical data, and work package instructions.
  • Consults the Maintenance Lead if technical assistance is needed during the repair process.
  • Inspects completed work before sign off to identify any needed rework; performs rework; ensures that repaired components meet prescribed standards and tolerances.
  • Performs serviceability tests on repaired components/systems using test equipment specified by the original equipment manufacturer.
  • Completes work package documentation by signing/stamping after finishing all designated operations.
  • Submits completed/in-progress work to Maintenance Lead for review; submits to Quality Assurance for final/in-progress inspection and re-certification of airworthiness.
  • Provides supervisor with performance statistics and other operational data, as requested.
  • Properly accounts for time and materials used in all inspection and maintenance activities.
  • Comply with repair station procedures (RSM /QCM) and company policies (SOP) when performing aircraft or component maintenance.

Featured Job

Avionics posted 11/30/2018 Ref No. 2130027880

Equipment: Commuter
Location: Bridgwater, VA

The Avionics Technician responsibilities include, but are not limited to:

  • Installs, inspects, tests, adjusts, or repairs avionics equipment, such as communications, navigation, instrument systems and flight control systems in assigned aircraft. Performs tasks independently with little or no supervision
  • Performs operational checks, bench checks, troubleshoots, and isolates malfunctions in complex aircraft avionics equipment
  • Uses complex test equipment such as continuous wave and pulse generators, time domain reflectometers, multi-trace oscilloscopes, frequency counters, multi-meters and deviation meters, and specialized test equipment to perform operational checks
  • Repairs or replaces components based on test results following blueprints, schematics, handbooks, and other technical documents
  • Performs calibration, repair and replacement of system components based on test results following blueprints, schematics, handbooks, and other technical documents.
  • -Practices good housekeeping, tool control, FOD awareness/prevention, and safety at all times
  • Annotates maintenance actions in aircraft records
  • Must obtain all certifications required to perform the job requirements

Featured Job

Sheetmetal Mechanic posted 11/13/2018 Ref No. 2130027707

Equipment: Regional Airlines
Location: Nashville, TN

Seeking a Sheet Metal Mechanic in Nashville, TN

Examines, repairs, assembles, and tests aircraft accessories, such as engines, power brake units, auxiliary electric motors, spark igniters, valves, pumps, fuselage, wings, and oil and fuel tanks, using hand tools and testing devices, and following shop orders and manufacturer's specifications. 

JOB RESPONSIBLITIES 

  • Performs routine inspections or special maintenance to prevent failures of aircraft mechanical systems and components; performs complete operations checks on hydraulic systems, pneumatic systems, plumbing, precision assemblies, rigging and controls, etc. 
  • Determines when a component should be repaired or replaced; decides upon necessary repair scheme, quantity and type of parts needed to accomplish proper repair; secures necessary parts from Stores or departmental supplies. 
  • Repairs, reworks, and modifies worn or defective assemblies, making alterations or changes to units when necessary. 
  • Follows approved maintenance procedures for subject component or system, consulting internal procedures that have been FAA approved, original equipment manufacturer's (OEM's) technical data, and work package instructions. 
  • Consults the Maintenance Lead if technical assistance is needed during the repair process. 
  • Inspects completed work before sign off to identify any needed rework; performs rework; ensures that repaired components meet prescribed standards and tolerances. 
  • Performs serviceability tests on repaired components/systems using test equipment specified by the original equipment manufacturer. 
  • Completes work package documentation by signing/stamping after finishing all designated operations. 
  • Submits completed/in-progress work to Maintenance Lead for review; submits to Quality Assurance for final/in-progress inspection and re-certification of airworthiness. 
  • Provides supervisor with performance statistics and other operational data, as requested. 
  • Properly accounts for time and materials used in all inspection and maintenance activities. 
  • Comply with repair station procedures (RSM /QCM) and company policies (SOP) when performing aircraft or component maintenance. 

Featured Job

A&P Mechanic posted 10/8/2018 Ref No. 2130027764

Equipment: Helicoptor
Location: Middletown, DE

  • Strom Aviation is currently seeking helicopter mechanics with either Bell 212, 407, 412, 429, AS365 or Sikorsky S-76 experience.  Must have 5 Yrs of A&P experience.  Need to be able to start ASAP 

    POSITION SUMMARY:
    The Helicopter Technician reports to the Maintenance Manager of Rotor Craft and is responsible for the installation, repair, modification and routine maintenance on aircraft as required; operates in compliance with company safety practices and performs other duties as assigned.

    ESSENTIAL DUTIES AND RESPONSIBILITIES

  • Inspect, test, repair, maintain, and service aircraft.
  • Read and interpret aircraft maintenance manuals and specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components.
  • Modify aircraft structures, space vehicles, systems, or components, following drawings, engineering orders and technical publications.
  • Examine and inspect engine or other components for cracks, breaks, or leaks.
  • Disassemble and inspect parts for wear, warping, or other defects.
  • Assemble and install electrical, plumbing, mechanical, hydraulic, and structural components and accessories, using hand tools and power tools.
  • Adjust, align, and calibrate aircraft systems, using hand tools, gauges, and test equipment.
  • Test engine and system operations, using testing equipment, and listens to engine sounds to detect and diagnose malfunctions.
  • Service and maintain aircraft systems by performing tasks, such as flushing crankcase, cleaning screens, greasing moving parts, and checking brakes.
  • Perform maintenance IAW FAA approved technical data.
  • Research FAA technical data to locate applicable data relevant to assigned tasks.

 

Featured Job

A&P Mechanic posted 10/8/2018 Ref No. 2130027497

Equipment: Commuter
Location: Middletown, DE

Strom Aviation has a need for 2 A&P Mechanics for a contract position in Middletown, DE. 

  • Inspect, test, repair, maintain, and service aircraft. Read and interpret aircraft maintenance manuals and specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Examine and inspect engine or other components for cracks, breaks, or leaks.
  • Disassemble and inspect parts for wear, warping, or other defects.
  • Assemble and install electrical, plumbing, mechanical, hydraulic, and structural components and accessories, using hand tools and power tools. Adjust, align, and calibrate aircraft systems, using hand tools, gauges, and test equipment. Test engine and system operations, using testing equipment, and listens to engine sounds to detect and diagnose malfunctions. Service and maintain aircraft systems by performing tasks, such as flushing crankcase, cleaning screens, greasing moving parts, and checking brakes. Perform maintenance IAW FAA approved technical data. Research FAA technical data to locate applicable data relevant to assigned tasks.

Featured Job

Quality Inspector posted 8/29/2018 Ref No. 2130027836

Equipment: Other
Location: Kernersville, NC

QUALITY ASSURANCE INSPECTOR

Location: Kernersville, NC

Compensation: Please call Strom Aviation for compensation details 800.743.8988

SUMMARY: The main function of the Quality Assurance Inspector is to perform inspections on all types of parts to ensure conformity FAA and customer approved drawings and specifications.  This is a non-exempt, full time, hourly position.

JOB DUTIES:

  • Ensure that parts meet the FAA or customer provided Approved Design Data prior to being accepted under PMA or customer requirements.
  • Maintain oversight of the systems used to provide the traceability of parts and materials in accordance with FAA and ISO9001/AS9100 requirements.
  • Maintain control of incoming parts and materials through applicable specifications or source control drawings.
  • Ensure that all parts and materials received for use are identified with the applicable part/material designation.
  • Support the Quality Manager in maintaining adequate procedures to ensure the quality of parts and materials purchased from outside suppliers.  This includes supplier control systems, audits, and defect control.
  • Perform Inspection function on parts.
  • Document and complete required paperwork and inspection records.
  • Complete required paperwork and input necessary information in computerized work order system.
  • Ensure that personal work station and equipment are cared for and used in a clean and safe manner.
  • Follow safety practices, policies and procedures.
  • Complete time card with proper codes.

ADDITIONAL RESPONSIBILITIES:

  • Perform functions of job as safely as possible.
  • Active participant in Company drug and alcohol program.
  • All other duties as required by the Company.

 

 

Featured Job

A&P Mechanic posted 8/21/2018 Ref No. 2130027769

Equipment: Commuter
Location: Springfield, MO

Location: Springfiled, MO

Compensation: Please call a Strom Aviation Representative for details 800.743.8988

Duration: Long term work (open ended)

Strom Aviation is currently seeking A&P Mechanics to perform maintenance on EMB120, Saab 340, Saab 2000 and EMB 145. 

Client performs variety of maintenance checks. 

1st Shift position - Monday - Friday

Job Duties and Responsibilities:

A&P Mechanics perform all aspects of Line and Hangar Maintenance to include inspect, repair, modify and troubleshoot aircraft in compliance with policies, manuals, procedures, and requirements. And ensure the highest degree of safety and the aircraft is ready for scheduled flights.

 

Featured Job

A&P Mechanic posted 8/20/2018 Ref No. 2130027374

Equipment: Heavy
Location: Indianapolis, IN

Looking for Commercial A&P mechanics to perform work in Indianapolis. Work will include routine as well as non routine maintenance. All work will be performed per FAA and manufacturer requirements.  This position is offering an employment opportunity to those Aircraft Mechanics with military experience and an A&P license looking for an opportunity to get some experience on civilian heavy commercial aircraft.  

Featured Job

Sheet Metal Mechanic Travel Pay Included posted 8/20/2018 Ref No. 2130027542

Equipment: Heavy
Location: Indianapolis, IN

Sheet metal mechanics will be performing routine and non routine repairs on commercial aircraft. All aircraft repairs performed per FAA and manufacturer requirments . Client works on both Airbus and Boeing Aircraft. Client has heated hangars and long term work.  Immediate feedback on resumes with quick starts available.  Candidates must have at least 3 years of Aircraft Structures / Sheetmetal experience  with at least 6 months being in the last 2 years.  Huge Travel Pay and Bonus Program Available for this position.

 

Featured Job

Composite Repair posted 8/20/2018 Ref No. 2130027676

Equipment: Heavy
Location: Indianapolis, IN

SUMMARY: Performs composite repairs related to molds, wet and pre-preg layup, repair of existing structures pertaining to Honeycomb. Carbon Kevlar and Fiberglass construction.

ESSENTIAL DUTIES AND RESPONSIBILITIES

Ability to perform hot and or cold bond repairs per the Aircraft SRM. EAS & other approved documentation with direct supervision. Identify damaged components by visual or tapping method with direct supervision. Ability to learn proper repair technique and materials required. Ability to learn proper techniques to sand, trim. Prime and fit repairs to parts. Ability to follow instructions for repair sequences, and completing necessary forms. Ability to understand and observe all safety procedures and maintain a clean work environment Cleans and removes any foreign objects generated during the course of effecting repairs. Complies with all safety procedures at all times. Without exception. Document all work accomplished on a daily bases. Performs such other tasks as may be reasonably assigned by her his supervisor.

CORE COMPETENCIES Commitment to company values and ethics Dependability: personally responsible. Completes work in a timely manner. And performs tasks accurately Motivation: must maintain a positive attitude and strong work energy Communication: excellent interpersonal and oral and written communication skills Continuous learning; ability to learn new procedures and adapt to change Creativity: makes constructive suggestions and creates novel solutions to problems evaluates new technology as potential solutions to existing problems Independent: must have the ability to carry out and follow through on tasks with minimal supervision

 

Featured Job

Avionics Technician posted 8/20/2018 Ref No. 2130027371

Equipment: Heavy
Location: Indianapolis, IN

ESSENTIAL DUTIES AND RESPONSIBILITIES

Effectively perform R&E Avionices/Electrical routine work associated with heavy aircraft A, B, C and D checks.

Detailed knowledge of aircraft avionics and electrical systems.

Understand engineering methodology for systems installations.

3+ Years of  aircraft Avionics Experience

Featured Job

Sheetmetal Mechanic BONUSES OFFERED posted 8/18/2018 Ref No. 2130027551

Equipment: Heavy
Location: Oklahoma City, OK

Skill: Sheetmetal Mechanic

Duration: 3+ months (open ended)

Location: Oklahoma City OK

Aircraft: 737, MD-80, CRJ, ERJ, C-40

Salary: please call Strom Aviation for compensation details (800) 743-8988; Bonuses Offered

Description:

Must be able to accomplish any and all repairs, modification, E.A.'s, etc, with minimal or no supervision on commercial and regional aircraft.  Must be able to use SRM, all tech data, and aircraft drawing to locate part numbers and accomplish repairs.  Must be able to fabricate part. Must be able to accomplish cold working, flap peening, etc.  Document maintenance performed on required forms.

Featured Job

A&P - U.S. Marshals Program posted 8/18/2018 Ref No. 2130027798

Equipment: Heavy
Location: Oklahoma City, OK

Skill: A&P Mechanic

Duration: 3+ months (open ended)

Location: Oklahoma City OK

Aircraft: 737, MD-80, CRJ, ERJ, C-40

Salary: please call Strom Aviation for compensation details (800) 743-8988

Description:

Must be able to perform flight control and engine throttle rigging.  Must be able to use the FAA approved data proficiently (ie IPC, M/M, OHM, SRM).  Must be able to perform excellent quality work.  Document maintenance performed on required forms.

Featured Job

A&P - Commercial and Regional Program posted 8/18/2018 Ref No. 2130027553

Equipment: Heavy
Location: Oklahoma City, OK

Skill: A&P Mechanic

Duration: 3+ months (open ended)

Location: Oklahoma City OK

Aircraft: 737, MD-80, CRJ, ERJ, C-40

Salary: please call Strom Aviation for compensation details (800) 743-8988

Description:

Must be able to perform flight control and engine throttle rigging.  Must be able to use the FAA approved data proficiently (ie IPC, M/M, OHM, SRM).  Must be able to perform excellent quality work.  Document maintenance performed on required forms.

Featured Job

A&P Mechanic posted 7/23/2018 Ref No. 2130027883

Equipment: Regional Airlines
Location: Nashville, TN

3+ Yrs of Experience @ MRO Preferred

A/P Mechanics -- CRJ or Embraer OR commercial experience with a stable work history. Examines, repairs, assembles, and tests aircraft accessories, such as engines, power brake units, auxiliary electric motors, spark igniters, valves, pumps, fuselage, wings, and oil and fuel tanks, using hand tools and testing devices, and following shop orders and manufacturer's specifications.
Performs routine inspections or special maintenance to prevent failures of aircraft mechanical systems and components; performs complete operations checks on hydraulic systems, pneumatic systems, plumbing, precision assemblies, rigging and controls, etc.
Determines when a component should be repaired or replaced; decides upon necessary repair scheme, quantity and type of parts needed to accomplish proper repair; secures necessary parts from Stores or departmental supplies.
Repairs, reworks, and modifies worn or defective assemblies, making alterations or changes to units when necessary.
Follows approved maintenance procedures for subject component or system, consulting internal procedures that have been FAA approved, original equipment manufacturer's (OEM's) technical data, and work package instructions.
Consults the Maintenance Lead if technical assistance is needed during the repair process.
Inspects completed work before sign off to identify any needed rework; performs rework; ensures that repaired components meet prescribed standards and tolerances.
Performs serviceability tests on repaired components/systems using test equipment specified by the original equipment manufacturer.
Completes work package documentation by signing/stamping after finishing all designated operations.
Submits completed/in-progress work to Maintenance Lead for review; submits to Quality Assurance for final/in-progress inspection and re-certification of airworthiness.
Provides supervisor with performance statistics and other operational data, as requested.
Properly accounts for time and materials used in all inspection and maintenance activities.
Comply with repair station procedures (RSM /QCM) and company policies (SOP) when performing aircraft or component maintenance.

Education:
High School/ GED
A & P License required

Featured Job

Aircraft Mechanic posted 7/19/2018 Ref No. 2130027757

Equipment: Military Aircraft
Location: Greenville, SC

P3 Engine and APU Operator experience as a P3 Flight Engineer and be capable ground operator qualification.

Inspects, troubleshoots, repairs, overhauls and modifies aircraft systems and power plants in accordance with established written procedures, specifications, and standards. Candidate must be knowledgeable in aircraft systems operation and maintenance to include landing gear, power plants, flight controls, disassembly, reassembly, rigging and aircraft movement.


 

Featured Job

Machine Shop Inspector posted 3/13/2018 Ref No. 2130027877

Equipment: Heavy
Location: Wichita, KS

Description :

Responsible for a wide range of inspection functions supporting supplier provided parts and assemblies, wire fabrication, weld, tubing, machining and tool fabrication and assembly. Follow programs, documents, drawings, specifications and quality standards to perform inspection functions. Perform audit/surveillance/measurement/inspection of all vendor, wire, weld, tube, and machined parts/assemblies/tools according to specifications, processes and procedures. Initiate and document any non-conforming materials, parts, assemblies or portions thereof, according to specification, process and procedures.

Duties

The Company will provide appropriate assistance in job training to enable employees to perform all necessary job functions including the following:

1. Working from drawings, documents, process specifications, quality control requirements, software programs and test procedures, perform any inspection of parts and assemblies including process and materials.

2. Dimensionally inspect parts or assemblies.

3. Initiate and document any non-conforming materials, hardware, software, tools, parts, assemblies or portions thereof, according to specifications, processes and procedures.

4. Inspect vendor, subcontractor or company parts and assemblies.

5. Follow a pre-determined sequence of own work.

6. Prepare and maintain Quality records.

7. Support the continuous flow of product within the manufacturing process by cross-training and assisting employees at all description levels including cross-training in the Metals, Process, Machine and Tooling Mechanic/Technician classifications supported by inspection.

Featured Job

Fuel Cell Mechanic posted 2/13/2018 Ref No. 2130027698

Equipment: Military Aircraft
Location: Greenville, SC

• Perform removal, installation, and inspection functions of fuel cells and assembly, and installation of components such as fuel lines, hardware, and fittings on various aircraft.
• Analyze various aircraft sealing, structural, and assembly drawings, to detect seal level deficiencies.
• Diagnose results of leak test to detect drawing, specification, structural and assembly sealing errors. Recommend corrective action necessary to correct deficiencies.
• Perform disassembly and teardown operations of aircraft fuel systems and related components.

Featured Job

A&P Technician posted 1/17/2018 Ref No. 2130027903

Equipment: Heavy
Location: Marana, AZ

  • Researches technical data and performs disassembly, repair, cleaning, adjustment, assembly, testing and calibration of aircraft components and company special tools and ground equipment in accordance with applicable maintenance manual and FAA regulations.
  • Repairs, replaces and rebuilds aircraft structures such as wings and fuselage, and functional components including rigging, surface controls, plumbing and hydraulic units.
  • Reads and interprets manufacturers and airlines maintenance manuals, service bulletins, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Upon removing units from an aircraft, engine, or other major component or subassembly, completes appropriate identification, routing tags and forms and makes appropriate entries into the Component Removal Log.
  • Inspects turbine blades to detect cracks or breaks.
  • Disassembles and inspects parts for wear, or other defects.
  • Repairs or replaces defective engine parts and reassembles and installs engine in aircraft.
  • Adjusts, repairs, or replaces electrical wiring system and aircraft accessories.
  • Performs miscellaneous duties to service aircraft including flushing crankcase, cleaning screens, greasing moving parts, and checking brakes.
  • Upon completion of work scope obtains the signature of a certified mechanic on work cards or forms.

Featured Job

A&P Technician posted 7/14/2017 Ref No. 2130024912

Equipment: Avionics/Electrical Design
Location: Wheeling, IL

Looking for 2 good A&P technicians to work an assignmment at Chicago Executive Airport.  Ideal candidates will have 5+ years experience on corporate aircraft.

We are really looking for someone with avionics and troubleshooting experience.

Description

Maintain corporate jet aircraft for a FAA 145 repair station

Duties Include

  • Performing scheduled maintenance and repair on airframe and engines in accordance with FAA and manufacturer guidelines
  • Perform minor to heavy inspections and repairs to airframe
  • Perform minor inspection and repairs to engines
  • Perform post flight inspections on returning aircraft
  • Tow and fuel aircraft when required
  • Weekend rotation required

 




Search...

Clear Search Criteria

Jobs for...