Browse Aviation Jobs

A&P Technician posted 7/23/2018 Ref No. 2130027002

Equipment: Heavy
Location: Hialeah, FL

This position will be responsible for performing maintenance on aircraft componets in accordance with the rules and regulations set forth by the FAA and our customer. This position offers a competitive salary and benefits.

  • Current and valid FAA A&P Certificate required
  • MUST have at least 5+ years of recent ...

Inspector posted 3/13/2018 Ref No. 2130027282

Equipment: Heavy
Location: Wichita, KS

Description :Responsible for a wide range of inspection functions supporting materials, sheet metal, composites, process and assembly operations. Follow programs, documents, drawings, specifications and quality standards to perform inspection functions. Perform audit/surveillance/measurement/inspection of all sheet metal/composite parts/assemblies according to specifications, processes and procedures. ...

Avionics Installer posted 3/7/2018 Ref No. 2130026274

Equipment: Corporate
Location: Lincoln, NE

This position is looking for experience with the following; installation, troubleshooting and repairing aircraft wiring and avionics systems using various hand tools, test equipment and technical reference materials to meet manufacturing specifications, client approved procedures, FARs, and industry standards in a safe, clean and organized work area. 

Essential Job Functions

  • With ...

A/P Mechanic posted 2/23/2018 Ref No. 2130027221

Equipment: Heavy
Location: Georgetown, DE


SUMMARY
This position requires the ability to perform aircraft and maintenance tasks with minimal supervision.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.

Provides instruction, direction, and training to lower level mechanics.
Operate aircraft systems and troubleshoot components.
Certified ...

A/P Mechanic posted 2/20/2018 Ref No. 2130027185

Equipment: Regional Airlines
Location: Nashville, TN

3+ Yrs of Experience @ MRO Preferred
A/P Mechanics -- CRJ or Embraer OR commercial experience with a stable work history. Examines, repairs, assembles, and tests aircraft accessories, such as engines, power brake units, auxiliary electric motors, spark igniters, valves, pumps, fuselage, wings, and oil and fuel tanks, using hand tools and testing devices, and following shop orders and manufacturer's ...

Sheetmetal Mechanic posted 2/13/2018 Ref No. 2130027316

Equipment: Heavy
Location: Georgetown, DE

Need Sheetmetal/Structures Mechanics. Need Strong Experience. Will be doing a mod on a 737 BBJ.

Sheetmetal Mechanic posted 2/9/2018 Ref No. 2130026651

Equipment: Helicoptor
Location: Middletown, DE

All candidates must have at least 5 years exp and working with thin sheetmetal

Will be on the S-333 side, doing some assembly work.   Will also consider other thin sheetmetal experience with some manufacturing.  

POSITION SUMMARY: 
The Assembler reports to the Project Manager and is responsible for the assembly of ...

A&P Technicians posted 4/24/2018 Ref No. 2130026598

Equipment: Avionics/Electrical Design
Location: Boise, ID

A&P Technicians with at least 4 years of corporate aircraft experience

Sheetmetal - CH-47 posted 3/9/2018 Ref No. 2130027246

Equipment: Military Helicoptor
Location: Middletown, DE

Will be on the CH-47 side, will be doing repairs and modifications.

Avionics Technician posted 2/21/2018 Ref No. 2130027155

Equipment: Heavy
Location: Duluth, MN

  • FAA Repair Station located at Duluth International Airport (DLH) in Duluth, MN 
  •  6 support shops
  • 188,000 square feet 
  • Accommodates up to 4 narrow-body aircraft
  • Specialization in Airbus and Boeing narrow-body airframes 

Avionics Technician posted 1/30/2018 Ref No. 2130026037

Equipment: Corporate
Location: Boise, ID

Avionics Technicians with bench/line/troubleshooting experience on at least one of the folloiwng...Pilatus, Falcon, Challenger, Gulfstream or Citation

Sheetmetal Technician posted 1/30/2018 Ref No. 2130026038

Equipment: Corporate
Location: Boise, ID

Sheetmetal Technicians with with an Airframe License and experience on corporate aircraft.

UPHOLSTERY TECH posted 8/14/2018 Ref No. 2130027334

Equipment: Corporate
Location: Little Rock, AR

5 Upholstery Fabricators that can make pattern/sew/and upholster armrests. 

Fabrication Specialist posted 8/14/2018 Ref No. 2130027330

Equipment: Avionics/Electrical Design
Location: Salt Lake City, UT

The sheet metal fabrication positions may require employees to perform machine set-up, machining such as hydraulic or CNC brake presses, 2 / 3 / 5 axis mills both CNC and manual, punch presses, shears, rollers, etc. and fabrication tasks such as buffing, deburing, and using general shop equipment. 

The composite assembly positions may perform composite assembly tasks such as hand ...

Composite posted 8/13/2018 Ref No. 2130027326

Equipment: Avionics/Electrical Design
Location: Oklahoma City, OK

Composite Technicians ,with KingAir, or similar experience to perform aircraft maintenance.

Assembly posted 8/13/2018 Ref No. 2130027129

Equipment: Avionics/Electrical Design
Location: Wichita, KS

Duties

The Company will provide appropriate assistance in job training to enable employees to perform all necessary job functions including the following:

1. Work with blueprints, changes, specifications, work orders, etc. to assemble and install to quality requirements parts and assemblies.
2. Complete required data gathering transactions to facilitate assembly ...

Assembly posted 8/13/2018 Ref No. 2130027186

Equipment: Heavy
Location: Renton, WA

  • Description :Assemble, install, seal, rig, inspect, and complete precision and other structural and system components, working from drawings, documents, process specifications, quality control requirements, and established processes and procedures. Functional test and correct, fit form and function of assemblies and components.
    Duties
    The Company will provide appropriate ...

Inspector / Programmer CMM posted 8/10/2018 Ref No. 2130027304

Equipment: Commuter
Location: Columbus, GA

Description/Comment:

To perform and maintain proper inspection standards, methods and procedures used by the Service Center in complying with all applicable Federal Aviation Regulations and manufacturer's recommendations. Ensures proper procedures are performed on all completed work before it is released to service. Completes all inspection and maintenance records, ...

Aircraft Painter posted 8/9/2018 Ref No. 2130027302

Equipment: Commuter
Location: Wichita, KS

• Prepares aircraft surfaces for painting by cleaning, scraping, sanding and then treating the metal with alumiprep and alodine.
• Applies aerodynamic sealer, and masks the aircraft using tapes and paper products (to protect windows, seals, struts, cables, etc.) in preparation for the paint process.
• Mixes, blends and thins paint products, per the manufacturers’ ...

Assembly posted 8/8/2018 Ref No. 2130026834

Equipment: Corporate
Location: Tulsa, OK

Perform structural assembly and fastener installation of components and assemblies, sealing in confined spaces. Assure quality conformance to company/customer requirements and specifications. Responsible for assuring final quality acceptance of installations, structures, components and controls.

-Perform a variety of fastener installation and structural assemble operations. -Apply sealing ...

Wire Harness Technician posted 8/7/2018 Ref No. 2130027294

Equipment: Military Aircraft
Location: Denver, CO

Cable and Wire Harness Technicians, should have backshop experience. Experienced in crimping, soldering, splicing, shield terminations, using heat guns and basic hand tools and test equipment. Building coax, wire harnesses with cannon plugs, data cables and connectors RJ45/50, Triax, Quadrax, RF, power and signal harnesses. Must be able to read and interpret aerospace electrical cable and harness ...

A&P Technician posted 8/7/2018 Ref No. 2130027292

Equipment: Military Aircraft
Location: Ft. Worth, TX

Field Service Position to support customer programs.  Perform Field Support Representative duties for deployed aircraft (US and Overseas) - provide training, perform system-level troubleshooting, communicate with operators and engineering support organizations.  A&P License required.

Avionics Modifications Specialist posted 8/7/2018 Ref No. 2130027290

Equipment: Corporate
Location: Lincoln, NE

Essential Job Functions

1. With limited supervision, performs wire marking, bundling and pre-pinning of systems to be installed.

2. With limited supervision, performs routing of wiring throughout aircraft and connecting wiring to accessories such as relays, circuit breakers, connectors and switches. Learns and performs preparation and pinning of new system terminations per ...

Finisher posted 8/6/2018 Ref No. 2130027289

Equipment: Corporate
Location: Hartford, CT

Finisher proficent with all aspects of cabinet refinishing including prep, repairs, spraying aircraft finishes, and final sanding and buffing. Candidate must also be proficient in localized touch ups and repairs both inside the aircraft and on the bench.

Sheetmetal Tech posted 8/3/2018 Ref No. 2130027275

Equipment: Corporate
Location: Augusta, GA

Sheetmetal Mechanic performs internal and external sheet metal repairs, modifications, and installations to all aircraft serviced at the facility.

A/P Technician posted 8/1/2018 Ref No. 2130027260

Equipment: Corporate
Location: East Alton, IL

Our client is looking for around four (4) A&P contractors to start in our Falcon program by the 3rd week in September. We are looking for QUALITY TECHNICIANS with employment longevity on resume . Our client is expecting the top tier technicians who have Falcon or other corporate jet specific experience. Strong troubleshooting experience please. 

A/P Mechanic posted 8/1/2018 Ref No. 2130027259

Equipment: Corporate
Location: Perryville, MO

Our client is looking for 15 QUALITY TECHNICIANS that have experience on corporate aircraft. For our Perryville facility we are interested in candidates with a focus on Citation and Gulfstream aircraft, but any corporate aircraft experience will be reviewed.

Assembly Manufacturing Managers posted 7/31/2018 Ref No. 2130027240

Equipment: Heavy
Location: Kinston, NC

Looking for 2nd Level Managers

Requirements:Deal Makers
5-10 Years of Manufacturing Experience
Strong Supervision experience
Must have Aerospace industry experience

​Manager is looking to bring these FLM's on permanent.  They must be willing to convert to FTE

Job Family Description:
Ensures the ...

A/P - - CH-47 Mechanic posted 7/31/2018 Ref No. 2130027239

Equipment: Military Helicoptor
Location: Middletown, DE

Looking for  Helicopter Mechanic with CH-47 Experience.Must be a US Citizen.  Must have A&P or military aviation training..

A&P Technician posted 7/27/2018 Ref No. 2130027228

Equipment: General Aviation
Location: Venice, FL

Re-assemble a pair Cessna 152 for a flight training school.

Sheetmetal Mechanic- Commercial Program posted 7/27/2018 Ref No. 2130027145

Equipment: Heavy
Location: Oklahoma City, OK

Sheetmetal Mechanics with modification or repair experience on commercial aircraft. Boeing 737, MD-80, or CRJ experience is a plus.

L4 Avionics Technician posted 7/26/2018 Ref No. 2130027213

Equipment: Avionics/Electrical Design
Location: Kansas City, MO

(Need Minimum of 3 years ie 36 month experience working on Commercial Aircraft)

Must have Commercial Aircraft Experience Boeing/Airbus/McDonnell Douglas (Client Strongly recommends experience on B737 and B767 experience)

SUMMARY: Performs simple repairs, checks and installations of all Avionics systems ...

Electro-mechanical assembly posted 7/24/2018 Ref No. 2130027199

Equipment: Speciality
Location: King of prussia, PA

Electro-mechanical assembly, to include CCA fabrication, CCA rework (SMT and Plated thru hole configurations) Avionics module and black box assembly and cable and harness fabrication.

Minimum of 5 years of electro-mechanical assembly and CCA fabrication of flight hardware

Active JSTD001 Active NASA harness certification Active polymerics certification

Must posses ...

Quality Inspector posted 7/24/2018 Ref No. 2130027191

Equipment: Corporate
Location: Lewisville, TX

Responsible for the inspection of components, subassemblies, and finished products for the completions market.  Responsibilities include determining the proper sampling plans based upon Component Specifications, Drawings, Inspection Plans, or Customer Supplied requirements.

Interior Mechanic posted 7/20/2018 Ref No. 2130027179

Equipment: Heavy
Location: Greensboro, NC

Interior work on Commercial aircraft. Minimum of 2 years heavy commercial experience is required (Boeing, McDonnell Douglas, and AirBus) for sheetmetal mechanics helicopter experience will be considered. KC10 Military aircraft experience will also be considered for all skill groups.

Recruiter posted 7/18/2018 Ref No. 2130027157

Equipment: Military Aircraft
Location: Ft Worth, TN

Manages the strategic sourcing, recruiting, and local employment branding and marketing campaigns for Lockheed Martin’s Aeronautics' Company. Tracks success of branding, marketing, and sourcing efforts to demonstrate ROI and drive investment decisions. Drives brand awareness and the candidate value proposition for Aeronautics' Company to reinforce Lockheed Martin as the employer ...

Recruiter posted 7/18/2018 Ref No. 2130027156

Equipment: Military Aircraft
Location: Ft Worth, TN

Manages the strategic sourcing, recruiting, and local employment branding and marketing campaigns for Lockheed Martin’s Aeronautics' Company. Tracks success of branding, marketing, and sourcing efforts to demonstrate ROI and drive investment decisions. Drives brand awareness and the candidate value proposition for Aeronautics' Company to reinforce Lockheed Martin as the employer ...

Sheetmetal Mechanic posted 7/17/2018 Ref No. 2130027152

Equipment: Helicoptor
Location: Central Point, OR

Sheetmetal mechanics needed to help with the manufacture of the Erickson AirCrane

Fixed wing or helicopter experience is ok, tools are required.  

They are looking for people who can fabricate.

This position performs maintenance and manufacturing tasks to aircraft, aircraft parts and components in accordance with Federal Aviation Administration (FAA). Complies ...

A&P Mechanic posted 7/17/2018 Ref No. 2130022297

Equipment: Corporate
Location: Minneapolis, MN

Need 3 mechanics--Falcon 10, 20, 50s primarily. Doing, A, B, C checks, scheduled and unscheduled maintenance. Prefer 3 + years of corporate jet experience. Pay dependent on experience. 4+ month contract with possibility of direct employment. Contact a Recruiter to find out more details today!

Avionics Technician posted 7/12/2018 Ref No. 2130027123

Equipment: Speciality
Location: Tampa, FL

Minimum Requirements
4 years Avionics Installation experience
Must have harness fabrication experience
Must possess standard technician tools
Responsibilities:
To identify malfunctions, remove, repair and install a limited variety of aircraft communication, navigation, avionics, and electrical components. Perform analysis of routine electrical and avionics malfunctions ...

A/P Mechanic posted 7/10/2018 Ref No. 2130026984

Equipment: Heavy
Location: Fort Worth, TX

This is a VIP completion center working on B-787 and B-737 aircraft. Performing troubleshooting of systems on VIP aircraft.  

Avionics Technician posted 7/9/2018 Ref No. 2130027101

Equipment: General Aviation
Location: Lincoln, NE

Our client is looking for Avionics Technicians who are experienced with troubleshooting, repair and installation on small Corporate and General Aviation aircraft.  They mostly work on Citation, King Air, Mooney and Air Tractors.  Long term position with great pay for the right candidates.  

Interior Install Technician posted 7/3/2018 Ref No. 2130027307

Equipment: Corporate
Location: Moline, IL

General Summary: Remove, refurbish and re-install aircraft interior furnishings.

Essential Job Functions:

  1. Ability to follow instructions.
  2. Work with a team in order to accomplish an established goal.
  3. Disassemble and reassemble aircraft interiors.
  4. Strip coverings from existing interior ...

Manufacturing Engineer posted 6/27/2018 Ref No. 2130027296

Equipment: Accountant
Location: Fort Worth, TX

Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling. Designs arrangement of machines within plant facilities to ensure most efficient and productive layout. Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance. ...

Inspector Aircraft - SMC N/A posted 6/27/2018 Ref No. 2130027059

Equipment: Military Aircraft
Location: Jacksonville, FL

Verifies product conformance to design requirements. Validates work instructions, tooling requirements, certifications, process standards, policies and procedures. Identifies and documents discrepancies. Segregates and controls non-conforming items to prevent unintended use or delivery. Verifies compliance to customer requirements. Identifies opportunities for corrective action while performing ...

Mechanic General - SMC-N/A posted 6/27/2018 Ref No. 2130027058

Equipment: Heavy
Location: Jacksonville, FL

Perform maintenance operations on aircraft, aircraft equipment, engines, components, flight controls and systems in accordance with DOD, manufacturer, company, supplier and other directives in support of aircraft modification. Perform other Airframe & Powerplant repairs.

A&P Technician posted 6/26/2018 Ref No. 2130027051

Equipment: General Aviation
Location: Greensboro, NC

To repair, maintain, overhaul and troubleshoot airframes, engine systems, parts and components. Performs 100 hour and progressive inspections as well as modification work on customer aircraft. 

 

Upholstery Technician posted 6/26/2018 Ref No. 2130027046

Equipment: Corporate
Location: Irving, TX

Fabricate and install upholstery, cover panels, and make simple patterns for aircraft interiors using design/engineering drawings and aircraft specifications.

 

Upholstery Technician posted 6/21/2018 Ref No. 2130027219

Equipment: Heavy
Location: Fort Worth, TX

Upholster Technicians for VIP completion Aircraft. Must have Corporate or VIP Completion Experience. Manager is looking for panel covering and floor covering install experience. Send resumes to bwroge@stromaviation.com 

F-35/F-16 Assembler posted 6/21/2018 Ref No. 2130027025

Equipment: Military Aircraft
Location: Pinellas Park, FL

F-35 canopies. Experience with new construction using large control tooling is preferred. It is not required but candidates should have this experience in order for them to be seriously considered for the position.

Interior Installer posted 6/18/2018 Ref No. 2130027312

Equipment: Corporate
Location: Little Rock, AR

Interior installation on Corp. aircraft (Falcons).  The Interior Installer works under general supervision to remove and install trim items, carpet, sound proofing, light structure, cabinetry and accessories on aircraft interiors.

 

Systems Mechanic posted 6/15/2018 Ref No. 2130026993

Equipment: Heavy
Location: Moses Lake, WA

SIDA Badge Required - No Felonies, A&P License REQUIRED  

Must have Commercial Aircraft Experience Boeing/Airbus/McDonnell Douglas

SUMMARY:  Service, repair and overhaul aircraft to ensure airworthiness.  Works under minimal supervision.

Systems

• Accomplish ...

Avionics Technician posted 6/15/2018 Ref No. 2130026995

Equipment: Heavy
Location: Moses Lake, WA

Performs routine repairs, checks and installations of all Avionics systems on the aircraft while under minimal supervision.  Boeing 737 and 767 experience is preferred.

Interior Technician posted 6/15/2018 Ref No. 2130026992

Equipment: Heavy
Location: Everett, WA

Position Purpose: Service, repair and overhaul aircraft to ensure airworthiness. Works under minimal supervision. SIDA Badge Required. Works under general supervision to remove, install, and/or fabricate aircraft interiors, which may include items such as trim, carpet, sound proofing, light structure, cabinetry, panels and other accessories. All work performed should be in accordance with company ...

Avionics/Electrical Tech I posted 6/12/2018 Ref No. 2130026980

Equipment: Corporate
Location: Brunswick, GA

Education and Experience Requirements:

High School graduate/GED. Two (2) years related work experience; or two (2) years of accredited schooling in aviation electronics. Ability to read and interpret basic blueprints and schematic diagrams.

Position Purpose:

Assists in troubleshooting and repairing system discrepancies to ensure minimum ...

Cabinet Finisher Sr posted 6/7/2018 Ref No. 2130026816

Equipment: Corporate
Location: St. Louis, MO

Under general supervision, prepares, applies, and touches up finish on aircraft furniture, aircraft specifications and design/engineering drawings. Assists lead by overseeing projects and providing guidance, assistance and direction to co-workers. Mentors and trains other Cabinet Finishers.

Sealer posted 6/6/2018 Ref No. 2130026925

Equipment: Corporate
Location: Tulsa, OK

  • Works from drawings, blueprints manufacturing specifications and procedures, quality procedures and instructions, operations and work sheets and company, military and customer specifications and procedures.

  • Inspects for proper installations and integrity.

  • Approves and stamps acceptable assemblies and reject assemblies not meeting requirements.

  • Exhibit ...

Cabinetmaker II posted 6/6/2018 Ref No. 2130027222

Equipment: Avionics/Electrical Design
Location: St. Louis, MO

Under general supervision, fabricates aircraft furniture and other wood-surfaced subassemblies using aircraft specifications, design and engineering drawings with a high level of safety, quality, detail and productivity. Assists team members with greater experience to enhance techniques supportive of quality workmanship.

Cabinetmaker II posted 6/6/2018 Ref No. 2130027220

Equipment: Avionics/Electrical Design
Location: St. Louis, MO

Under general supervision, fabricates aircraft furniture and other wood-surfaced subassemblies using aircraft specifications, design and engineering drawings with a high level of safety, quality, detail and productivity. Assists team members with greater experience to enhance techniques supportive of quality workmanship.

Flight Line Inspector posted 6/5/2018 Ref No. 2130026910

Equipment: Avionics/Electrical Design
Location: Mesa, AZ

Job Description:

The Mesa Integrated Quality team is seeking to fill a Flight Line Inspector position. The successful candidate must have AH-64 experience in: product acceptance / inspection techniques, Non-Conformance Management (NCM), preflight, post flight, special inspections, flight control systems (assembly/rigging), hydraulic systems, engine / APU assembly installation and operation, ...

Sheetmetal Mechanic posted 6/5/2018 Ref No. 2130027111

Equipment: Corporate
Location: Mansfield, TX

Sheetmetal Technician to work with the bonding of metal, mostly repair work. Will be doing repairs out of manuals.

Avionics Technician posted 6/4/2018 Ref No. 2130027291

Equipment: Military Aircraft
Location: Ft. Worth, TX

Avionics Tech to support customer programs.  Perform Field Support Representative duties for deployed aircraft (US and Overseas) - provide training, perform system-level troubleshooting, communicate with operators and engineering support organizations.  A&P License required.

Product Repair/Mod Tech - Electrical posted 6/1/2018 Ref No. 2130026898

Equipment: Military Aircraft
Location: New Orleans, LA

Electrical

Able to perform connector terminations including shielded wires, coaxial cables, and fiber optic wiring. Ability and understanding of routing instructions and handling of harnesses. Perform efforts associated with sealing, wrapping, bonding, tying, and closure of wire harnesses and cables in accordance with standard processes. Demonstrates the capability to read and interpret ...

Product Repair/Mod Tech - Structures posted 6/1/2018 Ref No. 2130026897

Equipment: Military Aircraft
Location: New Orleans, LA

Structures

Able to perform close tolerance drilling, reaming, removal, and installation to critical support structures and fracture critical areas. Ability and understanding of locating blind holes necessary for installation of new structural items to existing structure. Perform efforts associated with sealing, painting, shimming, and preserving structure in accordance with standard ...

Avionics Technician- Installer posted 5/31/2018 Ref No. 2130027263

Equipment: Corporate
Location: Grand Junction, CO

Looking for AV with strong experience with installation. Anyone with solid corporate experience would be the ideal candidate. We are looking for candidates that can work independently. They are booked with avionics work for the next 3+ months and need candidates that can hit the floor running.

A&P Technician posted 5/31/2018 Ref No. 2130026889

Equipment: Speciality
Location: Warsaw, IN

Looking for a good A&P to work in Warsaw, IN.  Pratt and Whitney experience, good PT6 experience preferred. Please contact a Recruiter today for more details.

Quality Engineer 3 posted 5/31/2018 Ref No. 2130026887

Equipment:
Location: Tulsa, OK

Develops, modifies, applies and maintains quality evaluation and control systems and protovols for processing materials into partially or finished materials product.

Collaboration with engineering and manufacturing functions to ensure quality standards are in placeDevises and implements methods and procedures for inspecting, testing and evaluating the preciion and accuacy of products ...

Interior Installer posted 5/30/2018 Ref No. 2130026874

Equipment: Corporate
Location: Westfield, MA

The Interior Installation Technician Senior works under limited supervision to remove, install, and/or fabricate aircraft interiors, which may include items such as trim, carpet, sound proofing, light structure, cabinetry, panels and other accessories. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations. ...

Aircraft Mechanic posted 5/30/2018 Ref No. 2130026873

Equipment: Corporate
Location: Westfield, MA

 

High school diploma/GED. Valid Drivers License required. FAA Airframe and Powerplant certificate and 2 years of aviation maintenance experience, or 4 years of aviation maintenance experience to include 2 years of experience working on mid/large-size aircraft required.


Under minimal supervision, performs inspections, maintenance, and repairs of moderate to advanced ...

Crew Chief, Completions Avionics Technician posted 5/25/2018 Ref No. 2130026855

Equipment: Avionics/Electrical Design
Location: Philadelphia, PA

Summary of Position: Coordiantion of Avionics activities related to the completion and repair of new and used aircraft.

Job Description

border="1" cellpadding="0" cellspacing="0">

Service, maintain, troubleshoot, and repair all avionics systems that perform

Functions of communications, ...

Interior Installer posted 5/25/2018 Ref No. 2130027288

Equipment: Corporate
Location: Windsor Locks, CT

Interior Installers for R&I willing to work second shift. 

Engine Mechanic posted 5/18/2018 Ref No. 2130027187

Equipment: Helicoptor
Location: Grand Prairie, TX

Engine Mechanics with experience on any helicopter engines, ideally gas turbines

RS Upholstery Technician I posted 5/18/2018 Ref No. 2130026803

Equipment: Corporate
Location: Appleton, WI

Experience/Education Required: High school diploma/GED. Job Summary: Looking for candidates with basic mechanical aptitude and organizational skills a plus. Sewing and seat upholstery experience is preferred.

Inspector posted 5/16/2018 Ref No. 2130027205

Equipment: Corporate
Location: Long Beach, CA

Physically inspects aircraft, aircraft components, and reviews related paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required documentation properly completed and filed. 

Aircraft Tech I posted 5/16/2018 Ref No. 2130027037

Equipment: Corporate
Location: Long Beach, CA

A&P Technician with at least 2 years of aviation maintenance experience.  Highly desire candiadtes with mid/large size corporate aircraft experience.

Avionics - - Helicopters posted 5/16/2018 Ref No. 2130026778

Equipment: Helicoptor
Location: Coatesville, PA

Job Summary:
Purpose of job: To install, trouble shoot and repair electrical wiring and avionics equipment

Duties

  • Read and interpret wiring diagrams
  • Coordinate with Shift Lead and Engineering on changes to blueprints and diagrams
  • Run and Mark wire to install complex wiring and electrical systems
  • Perform routine ...

Painter posted 5/16/2018 Ref No. 2130026777

Equipment: Corporate
Location: Dallas, TX

Looking for one reliable, experienced aircraft painter with 145 repair station experience, painting flaps, ailerons, spoilers, and rudders.  Experience in applying paint to radomes and flight controls is required. Interested candidates must be able to perform duties with little supervision, willing to work overtime with little notice and recognize paint processes IAW manufacturing specifications’ ...

HR Support posted 5/11/2018 Ref No. 2130026736

Equipment: Speciality
Location: Littleton, CO

This is a Staffing Coordinator position for University Talent Acquisition. Schedule candidate interviews while conducting necessary candidate checks (e.g., rehire eligibility). Send interview confirmations with travel information as appropriate. Update HR status. Review employment applications for completeness. Prepare offer letters with accurate compensation for review by the recruiter. Act as ...

HR Support posted 5/11/2018 Ref No. 2130026735

Equipment: Speciality
Location: Littleton, CO

This is a Staffing Coordinator position for University Talent Acquisition. Schedule candidate interviews while conducting necessary candidate checks (e.g., rehire eligibility). Send interview confirmations with travel information as appropriate. Update HR status. Review employment applications for completeness. Prepare offer letters with accurate compensation for review by the recruiter. Act as ...

A/P Mechanic posted 5/3/2018 Ref No. 2130026682

Equipment: Corporate
Location: Springfield, IL

This will be a long-term project

Must have A&P License, Here are the details - licensed A&P mechanics, with corporate aviation experience preferably on Falcons and Gulfstreams 

 HS Diploma or GED Required

3 to 5 Years Experience accomplishing maintenance checks on Falcon, Gulfstream, Hawker, Challenger, ...

Structures Technician posted 5/2/2018 Ref No. 2130027298

Equipment: Helicoptor
Location: Philadelphia, PA

Structures Technicians with 5+ years experience on helicopters for long term assignments.  

A&P Technician posted 5/2/2018 Ref No. 2130026673

Equipment: Helicoptor
Location: Philadelphia, PA

A&P Technicians with 3+ years aircraft experience, preferably with some on helicopters.  

Avionics Technician posted 5/2/2018 Ref No. 2130027065

Equipment: Helicoptor
Location: Philadelphia, PA

Assemble, modify, install wire bundles and other avionics equipment

Quality Control Inspector posted 5/2/2018 Ref No. 2130026674

Equipment: Helicoptor
Location: Philadelphia, PA

 QA with 3+ years maintenance experience, preferably with some helicopter experience.

A&P Mechanic - Premium posted 5/1/2018 Ref No. 2130026665

Equipment: Avionics/Electrical Design
Location: Goodyear, AZ

Sheetmetal Mechanic with 5+ years experience on commercial aircraft. Need heavy modification experience

Cabinet Builder posted 5/1/2018 Ref No. 2130027309

Equipment: Corporate
Location: Little Rock, AR

Job Summary:

  • Cabinet builder, must have at least 5 years experience in builders cabinets for the aviation field.
  • Must be able to read and interpret blueprints, ...

Product Repair/Mod Tech posted 4/24/2018 Ref No. 2130026610

Equipment: Military Aircraft
Location: Lemoore, CA

Job Description: Assembles, disassembles and/or modifies systems by changing, removing, replacing or upgrading aerospace vehicle components to correct failures or implement changes. Oversees assembly, disassembly or overhaul. Configures aerospace vehicles and bench test equipment. Troubleshoots complex pneumatic, hydraulic and electrical systems to isolate mechanical or electrical faults and repair ...

Product Repair/Mod Tech posted 4/24/2018 Ref No. 2130026844

Equipment: Military Aircraft
Location: Lemoore, CA

Assembles, disassembles and/or modifies systems by changing, removing, replacing or upgrading aerospace vehicle components to correct failures or implement changes. Oversees assembly, disassembly or overhaul. Configures aerospace vehicles and bench test equipment. Troubleshoots complex pneumatic, hydraulic and electrical systems to isolate mechanical or electrical faults and repair faulty components. ...

Product Repair/Mod Tech posted 4/24/2018 Ref No. 2130026843

Equipment: Military Aircraft
Location: Lemoore, CA

Assembles, disassembles and/or modifies systems by changing, removing, replacing or upgrading aerospace vehicle components to correct failures or implement changes. Oversees assembly, disassembly or overhaul. Configures aerospace vehicles and bench test equipment. Troubleshoots complex pneumatic, hydraulic and electrical systems to isolate mechanical or electrical faults and repair faulty components. ...

Aircraft Electrician/Avionics posted 4/23/2018 Ref No. 2130026976

Equipment: Military Aircraft
Location: Jacksonville, FL

Job Description: Ability to efficiently read and interpret schematics, assembly drawings, process specifications, wiring diagrams, technical manuals, written instructions, etc. 

Ability to efficiently use a variety of manual hand tools such as crimpers, strippers, wire cutters, heat shrink gun, etc.

Ability to efficiently assemble, modify, install and perform continuity ...

Inspector posted 4/20/2018 Ref No. 2130027327

Equipment: Avionics/Electrical Design
Location: Oklahoma City, OK

Aircraft Inspector for KingAir aircraft. Must have KingAir experience to be considered.

Avionics Technician posted 4/20/2018 Ref No. 2130026588

Equipment: Corporate
Location: Windsor Locks, CT

Troubleshoots repairs, inspect, modifies and services aircraft avionics, electrical and electronic equipment.  Performs and documents all work performed per appropriate manuals and regulations as required.

 

Structures Technician posted 4/20/2018 Ref No. 2130026587

Equipment: Corporate
Location: Windsor Locks, CT

Fabricate and modify aircraft structures to conform to Engineering drawings.  Install and modify aircraft avionics mounting structures.  Will assist Structures and Avionics Technicians as required

A&P Mechanic posted 4/17/2018 Ref No. 2130026811

Equipment: Corporate
Location: Indianapolis, IN

A&P Technician with a minimum of 2 years experience as a licensed Mechanic. One year required on Cessna, Hawker, or Beechcraft aircraft performing inspections and repair of aircraft.

Product Repair/Mod Technician C - Structures posted 4/17/2018 Ref No. 2130025336

Equipment: Military Aircraft
Location: Eglin AFB, FL

MUST HAVE HELD ACTIVE SECRET CLEARANCE IN PAST 24 MONTHS,.

Able to perform close tolerance drilling, reaming, removal, and installation to critical support structures and fracture critical areas. Ability and understanding of locating blind holes necessary for installation of new structural items to existing structure. Perform efforts associated with sealing, painting, shimming, and preserving ...

Product Repair/Mod Technician C - Systems posted 4/17/2018 Ref No. 2130026940

Equipment: Military Aircraft
Location: Eglin AFB, FL

Job Description: Assembles, disassembles and/or modifies systems by changing, removing, replacing or upgrading aerospace vehicle components to correct failures or implement changes. Oversees assembly, disassembly or overhaul. Configures aerospace vehicles and bench test equipment. Troubleshoots complex pneumatic, hydraulic and electrical systems to isolate mechanical or electrical faults and repair ...

Acft Technician II posted 4/16/2018 Ref No. 2130027208

Equipment: Corporate
Location: St. Louis, MO

Under minimal supervision, performs inspections, maintenance, and repairs of moderate to advanced complexity on aircraft systems and structures.

Acft Technician II posted 4/16/2018 Ref No. 2130027207

Equipment: Corporate
Location: St. Louis, MO

1. Communicate as required to receive and understand work assignments. Perform complex aircraft inspections, repairs, and modifications with minimal supervision. 2. Coordinate with MTL, STM, and the Inspection Department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete CMP cards, work order sign-offs, and other paperwork in a timely and accurate ...

Avionics Installers posted 4/11/2018 Ref No. 2130027324

Equipment: Corporate
Location: Oklahoma City, OK

Avionics Installers, preferably with KingAir experience.

A&P Mechanic posted 4/11/2018 Ref No. 2130027151

Equipment: Corporate
Location: Houston, TX

Looking for A/P Mechanic with significant amount of corproate aircraft experience and a stable work history. Falcon experience is a big plus.

Assembler posted 4/10/2018 Ref No. 2130027299

Equipment: Avionics/Electrical Design
Location: Kinston, NC

Start Date – ASAP

Skills
1. Verifies dimensions of parts using both mechanical and electronic measurement tools and, relative to these inspection duties, initiate and document corrective action for programming issues and other problems.
2. Employee must have the skill and knowledge to perform in all of the general functions of the Assembly Technician listed below:

Painter posted 4/10/2018 Ref No. 2130027262

Equipment: Heavy
Location: Greensboro, NC

Paint work on commercial aircraft. Boeing, Airbus, or McDonnell Douglas experience required. 3+ months in duration. Good candidates looking for a direct position may have an opportunity here. 

Assembler B/Electrical posted 4/9/2018 Ref No. 2130027144

Equipment: Avionics/Electrical Design
Location: Charleston, SC

 

Ability to select correct parts, materials, tools, assemblies, standards, hardware, etc. to Install, fit, fasten, align, adjust and perform the necessary pre-installation assembly work to accomplish the installation of wire provisions, wire bundles and harnesses, power feeders, signal data lines, and fiber optic harnesses requiring the use of production and engineering prints ...

L4 Airframe Mechanic posted 4/3/2018 Ref No. 2130027212

Equipment: Avionics/Electrical Design
Location: Kansas City, MO

SIDA Badge Required - Need Minimum of 3 years ie 36 month experience working on Commercial Aircraft Must have Commercial Aircraft Experience Boeing/Airbus/McDonnell Douglas

SUMMARY:  Service, repair and overhaul aircraft to ensure airworthiness.  Works under minimal supervision.

  • Read and interpret Single-Pilot Resource Management (SRM) ...

Sheetmetal Technician posted 4/3/2018 Ref No. 2130027325

Equipment: Corporate
Location: Oklahoma City, OK

Looking for the following (this is info directly from the managers): Smaller aircraft experience (CORP, GA, Regional) Not a lot of commercial and/or large military experience Not a lot of heavy Iron work Not factory work (not assembly, manufacturing)

Aircraft Support Mechanic II posted 4/2/2018 Ref No. 2130027319

Equipment: Avionics/Electrical Design
Location: Minneapolis, MN

To qualify for this position you must:

  • Have a valid driver's license Be at least 18 years of age
  • Be able to pass an extensive background check, drug test and audiogram
  • Be authorized to work in the US Have the ability to work a flexible schedule including weekends and holidays SIDA badge required by Delta.
  • This means they will need to have ...

A&P Technician posted 4/2/2018 Ref No. 2130027189

Equipment: Corporate
Location: Grand Junction, CO

Looking for A&P Mechanics to work on corporate aircraft.A&P's with corporate experience 

A&P Technician posted 3/29/2018 Ref No. 2130026796

Equipment: Corporate
Location: Eden Prairie, MN

With advanced knowledge and high level skills, inspect, test, adjust, repair, and perform other general tasks related to the maintenance and repair of airframe & engine systems and components on a variety of aircraft in a safe and clean work environment according to manufacturer’s specifications, company-approved procedures, FAA regulations, and customer expectations.  The Service ...

Avionics Technician posted 3/29/2018 Ref No. 2130027183

Equipment: Corporate
Location: Eden Prairie, MN

Avionics Technicians for installation on corporate aircraft.

Composite Mechanic posted 3/28/2018 Ref No. 2130027154

Equipment: Heavy
Location: Duluth, MN

Performs composite repairs related to molds, wet and pre-preg layup, repair of existing structures pertaining to Honeycomb, Carbon Kevlar and Fiberglass construction.

ESSENTIAL DUTIES AND RESPONSIBILITIES

  • Ability to perform hot and or cold bond repairs per the Aircraft SRM, EAs & other approved documentation with direct supervision.
  • Identify ...

Avionics Technician posted 3/27/2018 Ref No. 2130027267

Equipment: General Aviation
Location: Middletown, DE

Job Summary:
Currently looking for 2 Avionics Techs for a contract in Middletown, DE.  Avionics troubleshooters on the GA side. We are looking for skilled techs that have troubleshooting and system checkout experience.

Interior Technician posted 3/26/2018 Ref No. 2130027300

Equipment: Regional Airlines
Location: Nashville, TN

Strom Aviation is currently seeking 5 Interior Techs. Will be removing and installing interiors on regional aircraft.  Requires 3+ years of MRO Repair Experience

Avionics Installer posted 3/26/2018 Ref No. 2130027241

Equipment: Corporate
Location: Augusta, GA

Looking for a Avionics Installer with CORP experience at location in Augusta, GA. 3+ months worth of work. Pay is dependent on experience. Please contact a Recruiter to find out more!

Electrical Technician posted 3/26/2018 Ref No. 2130027206

Equipment: Avionics/Electrical Design
Location: Mesa, AZ

  • Fabricate, assemble, modify, repair, test, and provide shop support to production and prototype wire harnesses and electrical assemblies.
  • Identify nonconforming detail parts, assemblies and processes.
  • Work with engineering to improve manufacturing processes.
  • Constructs wire harnesses and panels by cutting, sorting, color-coding, measuring, stripping, crimping, ...

Bonder A Repair posted 3/21/2018 Ref No. 2130027280

Equipment: Commuter
Location: Victorville, CA

We are looking for a candidate that ideally has bonding experience in a repair environment.

Sheetmetal Technician (5-9 yrs exp) posted 3/19/2018 Ref No. 2130027098

Equipment: Commuter
Location: Bridgewater, VA

Looking for Sheetmetal technicianss with 5+ years experience for work in Virginia. Dash 8 (100, 200 and 300) experience is strongly preferred. Other multi-engine turbo prop or aircraft modification experience is also preferred. Contact a Recruiter to find out more today.

Sheetmetal Technician (10+ yrs exp) posted 3/19/2018 Ref No. 2130027099

Equipment: Commuter
Location: Bridgewater, VA

Looking for Sheetmetal technicianss with 10+ years experience for work in Virginia. Dash 8 (100, 200 and 300) experience is strongly preferred. Other multi-engine turbo prop or aircraft modification experience is also preferred. Contact a Recruiter to find out more today.

Quality Asscociate posted 3/15/2018 Ref No. 2130027024

Equipment: Military Aircraft
Location: Pinellas Park, FL

Performs all types of inspections and monitoring to support all phases of assembly and manufacturing, including purchased material, customer-supplied materials and parts. Candidate should have a thorough knowledge of blueprint readings/interpretation, math as well as a complete understanding of engineering drawing and specifications. Able to demonstrate knowledge of how to use basic measuring ...

Composite Technician posted 3/14/2018 Ref No. 2130027125

Equipment: Military Helicoptor
Location: Mesa, AZ

Assemble, modify and install aircraft assemblies, subassemblies, components, systems and Airframe structures on aircraft systems. Identify nonconforming parts, conditions and processes. Major Task and Responsibilities Assemble composite assemblies using bonding fixture and drill fixture tooling. Familiarity with rivet installation, rivet removal, bonding, composite trim, sealant process and associated ...

A&P Technician posted 3/13/2018 Ref No. 2130027297

Equipment: Heavy
Location: Ardmore, OK

A&P Mechanics, with experience on Boeing 737 aircraft. Needs to have landing gear remove and replace, engine remove and replace, flight control rigging and Pneumatic system operation, trouble shooting skills, and advanced aircraft systems trouble shooting and operation skills. 

A&P Mechanic posted 3/8/2018 Ref No. 2130026291

Equipment: Corporate
Location: Dallas, TX

A&P Technicians, with experience on corporate aircraft on an as-needed basis.  

Avionics Technician (10+ yrs exp) posted 3/7/2018 Ref No. 2130026289

Equipment: Commuter
Location: Bridgewater, VA

Job Responsibilities: · Install avionics equipment per engineering drawings while following wiring standards · Perform basic soldering, harness build up and installation including wire stripping and crimping, fault isolation and repair of avionics system failures · Perform scheduled maintenance on airborne communication, navigation, auto flight, and other avionics components ...

Avionics Technician (5-9 yrs exp) posted 3/7/2018 Ref No. 2130026288

Equipment: Commuter
Location: Bridgewater, VA

Job Responsibilities: · Install avionics equipment per engineering drawings while following wiring standards · Perform basic soldering, harness build up and installation including wire stripping and crimping, fault isolation and repair of avionics system failures · Perform scheduled maintenance on airborne communication, navigation, auto flight, and other avionics components ...

A&P Technician (10+ yrs exp) posted 3/7/2018 Ref No. 2130026287

Equipment: Commuter
Location: Bridgewater, VA

Looking for A&P's with 10+ years experience for work in Virginia. For the A&P Mechanic openings, Dash 8 (100, 200 and 300) experience is strongly preferred. Other multi-engine turbo prop or aircraft modification experience is also preferred. Contact a Recruiter to find out more today.

 

Sheetmetal Mechanic posted 3/7/2018 Ref No. 2130026286

Equipment: Commuter
Location: Springfield, MO

Job Summary: Looking for a structures / sheetmetal mechanic for a contract in Springfield, MO. Will be performing repairs on EMB-120, Saab 340 and Metros. Prefers a A&P license.

Inspector posted 3/7/2018 Ref No. 2130026869

Equipment: Commuter
Location: Springfield, MO

SUMMARY STATEMENT:

The Quality Control Inspector is responsible to the General Manager and Chief Inspector for the releasing to service of airframes, engines, propellers, appliances and the component parts thereof. Performs inspection of aircraft, components, assemblies, tools or parts during modifications, installation, service or overhaul to determine airworthiness, safety or conformance ...

A&P Technician (5-9 yrs exp) posted 3/7/2018 Ref No. 2130026285

Equipment: Commuter
Location: Bridgewater, VA

Looking for A&P's with 5+ years experience for work in Virginia. For the A&P Mechanic openings, Dash 8 (100, 200 and 300) experience is strongly preferred. Other multi-engine turbo prop or aircraft modification experience is also preferred. Contact a Recruiter to find out more today.

Assembler - Assembly posted 3/6/2018 Ref No. 2130027142

Equipment: Heavy
Location: Charleston, SC

Client is looking for  Assemblers with composite drilling experience, drilling close tolerance holes, working with fasteners, follow engineering drawings/instructions.

Qualified candidates will have aviation assebmly experience.

Must be able to pass a structural assessment.

Must be shift flexible

Assembler - Assembly posted 3/6/2018 Ref No. 2130027141

Equipment: Heavy
Location: Charleston, SC

Client is looking for  Assemblers with composite drilling experience, drilling close tolerance holes, working with fasteners, follow engineering drawings/instructions.

Qualified candidates will have aviation assebmly experience.

Must be able to pass a structural assessment.

Must be shift flexible

Machinist with Broetje Experience posted 3/4/2018 Ref No. 2130027328

Equipment: Heavy
Location: Kinston, NC

Strom Aviation is currently seeking a Machinist with Broetje experience.  Must have 3+ years of experience.  

A&P Technician posted 3/2/2018 Ref No. 2130027038

Equipment: Corporate
Location: Oklahoma City, OK

A&P Mechanics to perform aircraft maintenance. Looking for the following: Smaller aircraft experience (CORP, GA) Not a lot of commercial and/or large military experience Not factory work (not assembly, manufacturing)

A&P Mechanic posted 3/2/2018 Ref No. 2130027052

Equipment: Corporate
Location: Tampa, FL

Performs assembly, disassembly and repairs required in the completion of airframe overhaul, repair or modifications, including but not limited to removal, replacement and repair of parts of engines, airframes and systems. Responsible for helping licensed mechanics set up and tear down the equipment, tools and supplies used during the repair of the aircraft. Required to tow and move aircraft during ...

Avionics Technician posted 3/2/2018 Ref No. 2130026728

Equipment: Heavy
Location: Greensboro, NC

Avionics technicians needed for work on Commercial aircraft. A Minimum of 2 years heavy commercial experience is required (Boeing, McDonnell Douglas, and AirBus) for Avionics technicians. Helicopter experience will be considered. KC10 Military aircraft experience will also be considered for all skill groups.

Sheetmetal Technician posted 3/2/2018 Ref No. 2130026246

Equipment: Heavy
Location: Everett, WA

Structures Technicians to maintain, inspect, repair, modify, overhaul and troubleshoot commercial aircraft.  

Sheetmetal Mechanic - Premium posted 3/1/2018 Ref No. 2130026240

Equipment: Avionics/Electrical Design
Location: Goodyear, AZ

Sheetmetal Mechanic with 5+ years experience on commercial aircraft. Need heavy modification experience

A/P Mechanic posted 2/28/2018 Ref No. 2130027161

Equipment: Military Aircraft
Location: Greenville, SC

Candidate must have a minimum of 5 years’ experience in aircraft maintenance/modification.
Prior experience in Organizational and Intermediate level maintenance on C-130J and flight line experience required.
Ability to identify and troubleshoot aircraft systems and components.
Must also provide personal tools and shadowed toolbox required by the Company. See the minimum ...

L4 Structure Bond Mechanic posted 2/27/2018 Ref No. 2130027215

Equipment: Avionics/Electrical Design
Location: Kansas City, MO

Previous MRO experience REQUIRED PER CLIENT

Need Composite Repair Experience not Manufacturing Experience

SUMMARY:  Service, repair and overhaul aircraft to ensure airworthiness.  Works under minimal supervision.

Key Buzzwords for Resumes

  • Repair, replace, and rebuild ...

A&P Mechanic posted 2/23/2018 Ref No. 2130026207

Equipment: Heavy
Location: Goodyear, AZ

A&P Mechanics with commercial aircraft experience. Perform such typical maintenance operations such as the removal and replacement of aircraft and powerplant components that require bolting, torquing, adjusting rigging and safety wiring, including powerplant and flight control removal and reinstallation
Repair, modify, replace or overhaul aircraft and aircraft systems to ensure airworthiness.

Cabinet Finisher Sr. posted 2/22/2018 Ref No. 2130027178

Equipment: Corporate
Location: Brunswick, GA

Education and Experience Requirements:

High school diploma/GED. Wood working, wood finishing or auto body and painting experience in a technical environment or completion of Technical Certificate in cabinet making preferred and/or completion in current year youth apprenticeship program, in area of expertise.

Position Purpose:

Under ...

Sheetmetal Technician posted 2/22/2018 Ref No. 2130027043

Equipment: Heavy
Location: Indianapolis, IN

S/M techs needed to work on commercial aircraft. Experience with MD90, MD80, DC9, DC10 and even KC10 preferred. Contact a Recruiter for more details today.

Assembler - Assembly posted 2/22/2018 Ref No. 2130026091

Equipment: Commuter
Location: Sylmar, CA

Performs simple production assembly operations on structural and mechanical assemblies, subassemblies and aircraft systems, equipment and accessories using manual operations.
Job Summary: Performs a variety of technical manufacturing production assembly operations where accurate visual acuity and manual dexterity are required to fabricate production solar cell assemblies and solar panels ...

Product Repair/Mod Technician C posted 2/22/2018 Ref No. 2130025892

Equipment: Avionics/Electrical Design
Location: Goldsboro, NC

MUST HAVE SECRET CLEARANCE TO START  This is a Electrical/Avionics position. F-15 experience preferred but not a requirement. Assembles, disassembles and/or modifies systems by changing, removing, replacing or upgrading aerospace vehicle components to correct failures or implement changes. Oversees assembly, disassembly or overhaul. Configures aerospace vehicles and bench test equipment. ...

Product Repair/Mod Technician C posted 2/22/2018 Ref No. 2130025891

Equipment: Avionics/Electrical Design
Location: Goldsboro, NC

Job Description: Troubleshoots and maintains F-15 aircraft structures, systems, components, and related equipment. Removes and installs aircraft components. Conducts functional tests of repaired components and systems. Adjusts, aligns, and rigs aircraft systems. Supervises and performs aircraft jacking, lifting, and towing operations. Performs validation/verification testing ...

Product Repair/Mod Technician - SM/AV posted 2/22/2018 Ref No. 2130027103

Equipment: Military Aircraft
Location: Tinker AFB, OK

MUST HAVE HELD ACTIVE CLEARANCE IN PAST 24 MONTHS.  Must have own tools.

Job Description: - Structural Technician required with current active U. S. Secret Security Clearance

- Assembles, disassembles and/or modifies systems by changing, removing, replacing or upgrading aerospace vehicle components to correct failures or implement changes. 

- Experience ...

Product Repair/Mod Technician - Structures posted 2/22/2018 Ref No. 2130025857

Equipment: Military Aircraft
Location: Tinker AFB, OK

MUST HAVE HELD ACTIVE CLEARANCE IN PAST 24 MONTHS.  Must have own tools.

Close-tolerance structural modification technicians.

Demonstrates the capability to read and interpret engineering drawings, technical orders, process specification, and retrofit requirements to perform structural modification/repair. Experienced in the use of tooling assemblies and fixtures ...

Product Repair/Mod Tech C posted 2/22/2018 Ref No. 2130026917

Equipment: Avionics/Electrical Design
Location: Mesa, AZ

Assembles, disassembles and/or modifies systems by changing, removing, replacing or upgrading aerospace vehicle components to correct failures or implement changes. Oversees assembly, disassembly or overhaul. Configures aerospace vehicles and bench test equipment. Troubleshoots complex pneumatic, hydraulic and electrical systems to isolate mechanical or electrical faults and repair faulty components. ...

Mechanic General posted 2/22/2018 Ref No. 2130027303

Equipment: Avionics/Electrical Design
Location: Mesa, AZ

General mechanical experience with knowledge of associated hand tools and pneumatic tools. Perform basic tasks in support of AH-64D Longbow Apache component assembly and disassembly. Duties may also include repairing and inspecting of parts, assisting in documentation, cleaning parts, and various other duties in support of shop maintenance. Overtime may be required to support unscheduled job and ...

A&P Mechanic posted 2/21/2018 Ref No. 2130026070

Equipment: Heavy
Location: Duluth, MN

NOTE: Must be available to work any schedule or any shift

5-6 Years A320 Experience Required

  **will need to verify HS EDU and well as last school attended. **

Would need to have performed A&P Duties:

  • Repair, modify, replace or otherwise perform routine aircraft maintenance work in ...

Interior posted 2/21/2018 Ref No. 2130026616

Equipment: Heavy
Location: Duluth, MN

 Will consider all types of aircraft (ie Commercial, Corporate, Regional, VIP, GA, Military) as long as they possess aviation interior experience.

  1 year of experience working aviation interiors

NOTE: Must be available to work any schedule or any shift

Client is performing heavy checks. An interior technician ...

Structures Mechanic posted 2/21/2018 Ref No. 2130025997

Equipment: Heavy
Location: Duluth, MN

  • FAA Repair Station located at Duluth International Airport (DLH) in Duluth, MN 
  •  6 support shops
  • 188,000 square feet 
  • Accommodates up to 4 narrow-body aircraft
  • Specialization in Airbus and Boeing narrow-body airframes 

Sheetmetal Technician posted 2/21/2018 Ref No. 2130026039

Equipment: Avionics/Electrical Design
Location: Hillsboro, OR

We are looking for Sheet Metal techs to build Cargo Doors. Candidates must be able to read blue prints and be able to fabricate parts. Pay depends on experience.  Pay depends on experience.

Qualifications:

•3+ years of heavy overhaul/modification experience on large Commercial or large Regional Aircraft (CRJ/ERJ/EMB170 etc)

•Must be proficient in the ...

A&P Technician posted 2/21/2018 Ref No. 2130025551

Equipment: Corporate
Location: Eden Prairie, MN

The A&P Mechanic will perform scheduled and unscheduled maintenance on aircraft including Piper, Cessna, Pilatus, hawker Beech, Gulfstream, and other general aviation and corporate aircraft; as well as perform 100 hour, annual and phase inspections as required.  Contact a Recruiter to learn more today!

A&P Mechanic posted 2/20/2018 Ref No. 2130024728

Equipment: Corporate
Location: Juneau, AK

A&P Mechanic to support medevac aircraft.  Looking for candidates who have experience maintaining corporate aircraft (ideally Lear, KingAir, Pilatus PC-12).

Interior - Commercial and Regional Program posted 2/20/2018 Ref No. 2130027147

Equipment: Heavy
Location: Oklahoma City, OK

Must have 3+ years Commercial or Regional experience; Some needs to be within past 5 years.

Avionics Technicians - Commercial Program posted 2/20/2018 Ref No. 2130026859

Equipment: Heavy
Location: Oklahoma City, OK

Avionics Technician with experience with troubleshooting, systems; CRJ/ERJ/Commercial experience is preferred

A&P - Commercial and Regional Program posted 2/20/2018 Ref No. 2130027146

Equipment: Heavy
Location: Oklahoma City, OK

A&P Mechanics to perform maintenance on commercial and regional aircraft. Boeing 737, MD-80 or CRJ experience is a plus.

Repair Station Interior Installation Tech II posted 2/16/2018 Ref No. 2130026757

Equipment: Corporate
Location: Savannah, GA

Education and Experience Requirements:

High school diploma/GED. Two (2) years of applicable installation, fabrication or related experience. Experience in aerospace industry preferred.


Position Purpose:

The Interior Installation Technician II works under general supervision to remove, install, and/or fabricate aircraft interiors, ...

A&P Mechanic posted 2/16/2018 Ref No. 2130027027

Equipment: Heavy
Location: Indianapolis, IN

Looking for Commercial A&P mechanics to perform work in Indianapolis. Long term contract, OT available. This position is  also offering an employment opportunity to those Aircraft Mechanics with military experience and an A&P license looking for an opportunity to get some experience on civilian heavy commercial aircraft. We still have spots available in our February orientations. ...

Repair Station Aircraft Painter II posted 2/15/2018 Ref No. 2130026167

Equipment: Corporate
Location: Savannah, GA

Education and Experience Requirements:

High school diploma/GED. Valid Drivers License required. Two (2) years experience in related paint processes. Aircraft industry experience preferred. A working knowledge of paint processes and products (lacquers, enamels, epoxies, urethanes, and acrylics) is necessary.


Position Purpose:

The ...

A&P Technician posted 2/14/2018 Ref No. 2130026158

Equipment: Commuter
Location: Louisburg, NC

Client is located north of Raleigh, NC. Looking for 1 licensed technician with good Sheetmetal experience to work on a CASA 212 project ASAP. 4-6+ weeks worth of work, could go longer. Some OT will be available. CASA 212 or Garrett Turboprop experience preferred. Client would like to see a minimum of 3 years previous working A&P experience.

Maintenance Mechanic posted 2/13/2018 Ref No. 2130026950

Equipment: Military Aircraft
Location: Pinellas Park, FL

Typical minimums: High School Diploma or equivalent. Mathematical ability to perform and/or understand the calculations used in assigned areas and ability to read and interpret blueprints, specifications and technical data.

Competently uses computers and other systems to access, maintain and manipulate data.

Interpersonal skills and the ability to interface with all levels, ...

Avionics Premium posted 2/13/2018 Ref No. 2130026145

Equipment: Avionics/Electrical Design
Location: Goodyear, AZ

Seeking Avionics technicians with a lot of modification and troubleshooting experice on comercial aircraft

Avionics Technician posted 2/13/2018 Ref No. 2130027044

Equipment: Heavy
Location: Indianapolis, IN

Job Summary:
Avionics technicians needed ASAP to work on Commercial aircraft in Indianapolis, IN. 5+ years experience preferred, long term contract, OT is available. Please contact a Recruiter today for more information.

Maintenance Technician III posted 2/13/2018 Ref No. 2130026341

Equipment: Heavy
Location: Indianapolis, IN

Under minimal supervision, perform scheduled inspections, routine service to complex maintenance and repair activities on various airframe types. Long term contract work, contact a Recruiter to learn more today!

Avionics Technician III posted 2/13/2018 Ref No. 2130026427

Equipment: Avionics/Electrical Design
Location: Indianapolis, IN

Required Skills and Abilities:

  • Ability to conduct operational testing and troubleshooting on avionics systems and components.
  • Performs the installation and functional test of avionics components and systems on aircraft per engineering specs, blueprints and/or maintenance manuals.
  • Repair or replace defective components and wiring to ensure ...

Sheetmetal Mechanic posted 2/13/2018 Ref No. 2130027323

Equipment: Corporate
Location: Florence, SC

We are need of a Sheetmetal mechanic preferably with King-Air experience or PT6 experience to start ASAP. 

Avionics Technician posted 2/9/2018 Ref No. 2130026144

Equipment: Heavy
Location: Goodyear, AZ

Job Summary: Looking for 2 Avionics technicians to work on Commercial aircraft. Must have 3+ years of experience on related aircraft.

Aircraft Assembly Technician posted 2/9/2018 Ref No. 2130027105

Equipment: Heavy
Location: Mesa, AZ

Assemble, disassemble, install, test and troubleshoot mechanical and electrical assemblies and subassemblies on aircraft systems.

Aircraft Tech II posted 2/8/2018 Ref No. 2130026954

Equipment: Corporate
Location: Brunswick, GA

*Tools will not be required as Gulfstream utilizes consolidated/shared tool boxes.

Unique Skills: A&P License Required

Education and Experience Requirements:

High school diploma/GED. Valid Drivers License required. FAA Airframe and Powerplant certificate and 2 years of aviation ...

Sheetmetal Mechanic posted 2/8/2018 Ref No. 2130026129

Equipment: Heavy
Location: Goodyear, AZ

Job Summary:
Sheetmetal Mechanic with 3+ years experience on commercial aircraft.Currently looking for modification experience.  Ideal candidates have commercial aircraft experience, but they are currently willing to consider commercial helicopter, regional, and large military aircraft experience as long as the experience is solid and detailed on the resume.  

SPECIFIC ...

Avionics/Electrical Tech II posted 2/6/2018 Ref No. 2130026441

Equipment: Corporate
Location: Brunswick, GA

Education and Experience Requirements:

High School graduate/GED. A & P license, FCC license or NCATT certification preferred. Four (4) years experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and two (2) years related experience.

Position Purpose:

Provides technical ...

A&P Mechanic posted 2/6/2018 Ref No. 2130026809

Equipment: Corporate
Location: Newburgh, NY

An A&P to repair, maintain, overhaul and troubleshoot airframes, engine systems, parts and components. 

 

L4 Flight Control Mechanic posted 2/2/2018 Ref No. 2130027214

Equipment: Heavy
Location: Kansas City, MO

A&P License REQUIRED

Must have Commercial Aircraft Experience Boeing/Airbus/McDonnell Douglas

Previous MRO experience

  • Rigging Flight Controls
  • Remove and Replace Flight Controls
  • Inspection of Flight Control Cables for Corrosion
  • Troubleshoot ...

L4 Systems Mechanic posted 2/2/2018 Ref No. 2130027216

Equipment: Heavy
Location: Kansas City, MO

Need Minimum of 3 years ie 36 month experience working on Commercial Aircraft

A&P License REQUIRED 

Must have Commercial Aircraft Experience Boeing/Airbus/McDonnell Douglas

SUMMARY:  Service, repair and overhaul aircraft to ensure airworthiness.  Works under minimal supervision.

Previous ...

Composite Repair Mechanic posted 2/2/2018 Ref No. 2130025209

Equipment: Heavy
Location: Everett, WA

Composite Repair experience required, familiar with large commercial aircraft components.

Sheetmetal Technician posted 2/2/2018 Ref No. 2130025921

Equipment: Heavy
Location: Everett, WA

Sheetmetal fabrication and repair of components for commercial aircraft

Systems posted 2/2/2018 Ref No. 2130025919

Equipment: Heavy
Location: Everett, WA

  • Accomplish remove and replace landing gear, engines and air-conditioning systems

  • Utilize OEM and Engineering  drawings to modify parts

  • Rig landing and operational test gear systems and engine systems

  • Trouble shoot landing gear, engines, hydraulic and air-conditioning systems

  • Tow ...

Flight Control Mechanic posted 2/2/2018 Ref No. 2130025920

Equipment: Heavy
Location: Everett, WA

Responsibilities:

  • Remove and Install flight control surfaces and components
  • Repair, replace, and rebuild aircraft structures
  • Utilize OEM and Engineering drawings to modify structures and flight controls
  • Perform weight and balance including calculation of flight control surfaces 
  • Perform rigging and operational test of all flight ...

Heavy Structures Technician posted 2/2/2018 Ref No. 2130025706

Equipment: Heavy
Location: Everett, WA

Structures Technicians with heavy check experience on commercial aircraft.

Avionics Technician posted 2/2/2018 Ref No. 2130026032

Equipment: Heavy
Location: Everett, WA

Performs routine repairs, checks and installations of all Avionics systems on the aircraft while under minimal supervision.  Boeing 737 and 767 experience is preferred.

A&P Mechanic posted 2/1/2018 Ref No. 2130027322

Equipment: Corporate
Location: Florence, SC

We are need of an A&P mechanic preferably with King-Air experience or PT6 experience to start ASAP. Needs to also have prop experience. 

Painter posted 1/30/2018 Ref No. 2130026512

Equipment: Corporate
Location: Springfield, IL

Aircraft Painter (Minimum of 3-5 years of experience) 

HS Diploma or GED Required

Position Description  

• Prepares aircraft surfaces for painting by cleaning, scraping, sanding and then treating the metal with alumiprep and alodine.
• Applies aerodynamic sealer, and masks the aircraft ...

Avionics Technician w/ A&P License posted 1/30/2018 Ref No. 2130020991

Equipment: Corporate
Location: Minneapolis, MN

  • Perform Avionics Trouble Shooting and Avionics Installation on Corporate Jet aircraft.

A&P Mechanic posted 1/30/2018 Ref No. 2130023163

Equipment: Corporate
Location: Hillsboro, OR

Performs all airframe, power-plant, propeller repairs and modifications required to meet company, manufacturer, and FAA requirements.

• Performs routine inspections and troubleshooting.

• Operates all power tools and equipment necessary to accomplish job assignment.

• Accurately completes all required maintenance records.

• Accurately ...

A/P Mechanic posted 1/30/2018 Ref No. 2130024487

Equipment: Corporate
Location: Augusta, GA

Looking for a contract to direct A&P Mechanic. Candidates need 3+ years of experience in the industry and prefer experience on Hawker, Falcon, Lear, Astra, Westwind, or Gulfstream aircraft.

A&P Mechanic posted 1/30/2018 Ref No. 2130025401

Equipment: General Aviation
Location: St. Paul, MN

Looking for A&P mechanics to work a 2nd shift contract starting ASAP. 2+ years experience preferred on GA aircraft, OT is available, and chance to go direct exists. Contact a Recruiter to learn more today!

Flight Readiness Technician posted 1/30/2018 Ref No. 2130025750

Equipment: Commuter
Location: Palmdale, CA

Inspector Aircraft, Mechanic Electrical and Electronics, and Mechanic Flight,

Upholstery Technician posted 1/30/2018 Ref No. 2130026764

Equipment: Helicoptor
Location: Coatesville, PA

Currently seeking a upholstery tech for a client in Coatesville, PA. Must be able to sew. Will be working on seats.

A&P Mechanic posted 1/30/2018 Ref No. 2130026007

Equipment: Heavy
Location: Wilmington, OH

Strom Aviation is seeking 25 A&P Mechanics in Wilmington, OH.  Long Term contract.  3+ Yrs of Commercial Experience Required.

Sheetmetal Technician posted 1/30/2018 Ref No. 2130026009

Equipment: Heavy
Location: Wilmington, OH

Five Structures Techs: Minimum four years in the art of structural repairs on large transport aircraft.   Boeing 767, 757, 737.

Machinist posted 1/30/2018 Ref No. 2130026021

Equipment: Avionics/Electrical Design
Location: Cincinnati, OH

  • Job Duties
  • Performs setup, calibration, maintenance, programming and operation on a variety of machining equipment including lathes, grinders, drill presses, milling machines, computer numerically controlled and hydraulic presses to assemble and/or fabricate parts and complex assemblies.
  •  Reads and interprets specification manuals, blueprints, templates and layouts ...

Machinist posted 1/30/2018 Ref No. 2130026022

Equipment: Corporate
Location: Hillsboro, OH

Position Description 

Set up and operate a variety of machine tools to produce precision parts and instruments which includes precision instrument makers who fabricate, modify, or repair mechanical instruments. May also fabricate and modify parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, mathematics, metal properties, ...

Operations Trainee posted 1/30/2018 Ref No. 2130026576

Equipment: Corporate
Location: Savannah, GA

NO PRIOR AIRCRAFT EXPERIENCE REQUIRED, JUST NEED MECHANICAL APTITUDE - (ie S-M New Grads Would Be Perfect.) 

Unique Skills:

Excel working in a team environment, mechanical skills a plus. Structural background a plus, read and understand blue prints.

Knowledge and use of basic hand tools, interpret and understand aircraft maintenance ...

Avionics Installer posted 1/30/2018 Ref No. 2130026036

Equipment: Corporate
Location: Boise, ID

Avionics Installer with experience on at least one of the folloiwng...Pilatus, Falcon, Challenger, Gulfstream or Citation

Final Line Mechanic II posted 1/30/2018 Ref No. 2130026640

Equipment: Corporate
Location: Savannah, GA

***Good fit for a Military Mechanic whom performs A&P duties but does not possess an A&P License***

Unique Skills: Must have previous aircraft experience. Good working knowledge of hand tools and mechanical skills. Must be able to lift 50#, work from heights and or in confined spaces, submit to and maintain various work related ...

Composite Mechanic posted 1/19/2018 Ref No. 2130027217

Equipment: Heavy
Location: Greensboro, NC

Composite mechanics needed to work on Commercial aircraft. Mechanics with minimum of 2 years Aircraft Composite experience prefered. Contact a Recruiter today for more details.

Line Maintenance/Service posted 1/19/2018 Ref No. 2130027284

Equipment: Heavy
Location: Greensboro, NC

INCREASED PAY RATES!!  Need A&P technicians to work on Regional aircraft in Greensboro, NC. 2+ years experience requiried. Long term contract. Please contact a recruiter to learn more today.

A&P Technician posted 1/19/2018 Ref No. 2130025902

Equipment: Heavy
Location: Greensboro, NC

INCREASED PAY RATES!!  Need A&P technicians to work on Commercial aircraft in Greensboro, NC. 2+ years experience requiried. Long term contract. Please contact a recruiter to learn more today.

Structural Mechanic III posted 1/18/2018 Ref No. 2130027254

Equipment: Corporate
Location: Savannah, GA

*Tools will not be required as Gulfstream utilizes consolidated/shared tool boxes.

Department: J0611-Doors? Shift: 4x10

Unique Skills:  Use of structural shop tools required.

Education and Experience Requirements:

High School Diploma/GED. ...

Structural Mechanic II posted 1/18/2018 Ref No. 2130026968

Equipment: Corporate
Location: Savannah, GA

Unique Skills: Structure experience recommended. Ability to work in confined spaces. Must able to work night shift and or weekend shifts. 

Education and Experience Requirements:

High School Diploma/GED. Two (2) years related structural assembly experience. Experience working with Solumina and Smarteam preferred.

S-M ...

Sheetmetal Tech II (Repair Station) posted 1/18/2018 Ref No. 2130027068

Equipment: Corporate
Location: Savannah, GA

Unique Skills: Some experience in working with saw/shear equipment, band saws, brake presses and drills required.

  • S-M Mechanic will get 3 weeks hands on training before working on the aircraft including experience with:
    • Hiloks
    • Sealant
    • Drilling Closer Tolerance Holes
       

Education ...

Avionics technician posted 1/16/2018 Ref No. 2130027035

Equipment: Heavy
Location: Lake City, FL

Looking for Avionics Technicians for a position in Lake City, FL. OT available, long term contract. Looking for candidates who are not job hoppers. Please contact a Recruiter for more details.

Avionics technician posted 1/16/2018 Ref No. 2130027040

Equipment: Heavy
Location: Lake City, FL

Looking for Avionics Technicians for a position in Lake City, FL. OT available, long term contract. Looking for candidates who are not job hoppers. Please contact a Recruiter for more details.

Aircraft Inspector posted 12/18/2017 Ref No. 2130026496

Equipment: Heavy
Location: Goodyear, AZ

The Aircraft Inspector completes evaluations of aircraft, engines and components to determine their condition against established standards and performs inspections of work completed by Aircraft Maintenance Technicians (AMT) to verify compliance with approved data. He/She performs work within budgeted time and within AerSale, FAA, and customers’ standards of quality. The Aircraft Inspector ...

A&P Mechanic posted 12/15/2017 Ref No. 2130025844

Equipment: Commuter
Location: Bangor, ME

Currently seeking A&P mechanics to work on corporate aircraft.  Will really need to have experience on Hawkers, Cessna and Beechcraft, smaller type corporate aircraft.  We are looking to have them start within the next few weeks.

Fabrication Specialist C posted 12/5/2017 Ref No. 2130027013

Equipment: Avionics/Electrical Design
Location: Salt Lake City, UT

Performs machine set-up, machining, sheet metal fabrication and extrusion, and fabrication tasks. Performs composite lay-up, fabrication and assembly tasks. Assembles detail parts into small and large components. Installs wire harnesses. Performs organic chemical conversion, paint preparation and applies organic coatings for corrosion protection and appearance requirements.

A&P Technician posted 7/14/2017 Ref No. 2130024912

Equipment: Avionics/Electrical Design
Location: Wheeling, IL

Looking for 2 good A&P technicians to work an assignmment at Chicago Executive Airport. Work will be on corporate aircraft. Ideal candidates will have 5+ years experience on corporate aircraft. OT available. Opportunity for direct employment exists. Competitive pay. Contact a recruiter to learn more today.